Carbon Clean Diesel Engine Hydrogen Carbon Cleaning Machine With
4.5 KW Power Supply
The solution of reducing the exhaust emission:
The best solution is engine carbon cleaning.
When there are some carbon deposits increased in the car engine,
especially in the three way catalytic converter, the harmful and
other substance cannot be filtered and exhausted directly.
Therefore, during the daily, we can usually see the white, black
and blue exhaust emission, which shows that there is something
wrong in the engine system. If the car owner don’t solve this
problem, then the exhaust emission of their cars will not meet the
requirement of air standard.
What is carbon cleaning service?
1. Traditional method of cleaning carbon:
Dismantle engine parts, and then take use of the chemical cleaning
agent to clean every parts of engines. This way can clean the
carbon deposit thoroughly, but it will do harm to human’ s healthy
and damage engines.
2. HHO technology carbon cleaning method. It is no need to
dismantle engine parts, just connect the intake manifold and put
the mixture of Oxygen and Hydrogen in to the engine system and
combust with the carbon deposit. The carbon will be melted and
exhaust with the steam generated by the Oxygen and Hydrogen through
|Voltage||AC 110V single phase|
|Gas Output||1500L/h ±10%|
|Working Pressure||≤0.2 Mpa|
|Ambient temperature range||5°C~50°C|
How to use it?
- Turn on the power and select the car displacement and operating
- Insert the gas outlet pipe of the machine into the car engine
intake manifold (air filter or brake vacuum tube).
- Start the vehicle and keep idling
- Setting the time of cleaning carbon(up to types of vehicles,
usually 20 min),then click the start button on the control panel.
- When hearing the buzzing sound, the machine finished engine carbon
- Turn off the power of the machine, then turn off the vehicle, pull
out the gas outlet pipe in the end.
- Restore the car line.
- Start the car, step on the throttle at a constant speed until the
speed is at 3000-3500 rpm and then release it,and do it again after
3 seconds. This was repeated 6 times. Until the moisture and dirt
in the exhaust pipe are discharged, the carbon removal is finished.