Small Trucks HHO Engine Carbon Cleaning Machine AC 230V Rated Voltage

AC 230V Rated Voltage HHO Engine Carbon Cleaning Machine Engine Cleaning Products

Why do turbos get dirty ?

Compressed air is one of the principal aspects of a working engine. The turbocharger is a turbine-driven forced induction device that increases an engine’s efficiency and power by forcing extra air into the combustion chamber. This improvement results because the turbine can force more air, and proportionately more fuel, into the combustion chamber than atmospheric pressure alone. The power needed to spin the centrifugal compressor is derived from the kinetic energy of the engine’s exhaust gases, without consuming any power from the drive shaft.

Poor fuel atomization leads to the generation of soot, which can clog up the exhaust system. This puts negative pressure on the turbocharger, which inhibits the exhaust and reduces engine power. In addition to a less powerful engine, the main symptoms of this predicament are faulty engine starts, a noisy turbo, white exhaust smoke, and the over-consumption of oil.

How to preserve the life of the turbocharger ?

The turbocharger is lubricated by oil from the engine. Therefore, as is the case with other mechanical components, it is in the best interest of the owner to adhere to the manufacturer’s recommendations regarding oil change intervals as well as the grade of oil to use. Smooth driving from a cold start is recommended, as long as the engine and engine oil temperature rise. Also important to note: when the engine is shut off, although the oil is no longer flowing, the turbocharger will continue to turn for a short period of time. To prevent the turbo from turning dry, it is recommended to let the engine run for a while after coming to a final stop.

Specification:

Description:

HHO carbon cleaner can completely remove the carbon deposits in the engine and it only takes 20 minutes. After that, the car owner will found that the engine problems disappeared gradually. The engine noise reduced, exhaust emission with harmful substance lower down, engine power increased 20%. There maybe not visible effect like other chemical drip engine carbon cleaning machine through exhaust pipeline, but it is effective in the driving performance.

FAQs:

1. Can I use ordinary tap water?

---No, you should only use distilled or deionised water, never tap water or mineral water which could fur up the plates and reduce output.

2. Do I need electrolyte and where can I buy it?

---We use potassium hydroxide flake. A starter amount is provided, more can be bought in HDPE tubs from chemical suppliers on eBay.

3. Besides supplying HHO to the air intake, is there anything else I should do when carbon cleaning?

---Ensure the engine is warm before you start, dab the throttle to rev the engine every few minutes to help carry the loosened particles out.

4. If it HHO burns to produce water wont that harm my engine?

---No because the temperatures are too high to allow condensation of the vapour and water vapour is a normal product of combustion anyway, so engines are designed to handle it. It passes out safely as high temperature steam.

5. Do you provide an operating manual?

---Yes, these are forwarded to our customers as PDF files.

6. Can you supply the units unbranded so I can add my own logo?

---Yes just specify the LOGO, we can print on machine .

Shenzhen Zeayeto Automotive Technology Co.,LTD is a high-tech automotive maintenance equipment manufacturer and exporter ever since 2013. The products apply to gasoline&diesel vehicle. It is widely used for maintenance of combustion engine, transmission, power steering, lubrication system, water cooling system, air conditioning system, brake system etc, which provide intelligent and convenient way in automotive aftermarket worldwide. We persist being the leading smart automotive maintenance solutions provider and manufacturer.

Zeayeto supplies products to 57 countries. Sales revenue in 2018 is USD5.97 million. With 100+ well trained and skilled employees,our annual capacity are 24 thousand pieces. Over 10 series equipment, All come with CE, FCC,REACH, ROHS marks. ISO 9001 and ISO14001 have been certified. We utilize advanced production and inspection facilities from Japan,Germany and USA. The inspection occurs throughout whole process flow. On the top of that, we invest 10% sales revenue in R&D of core technology and new facilities to improve competitiveness . Hence, the OEM/ODM project is absolutely doable and welcome.

Customer Oriented, Quality Focused, Technology Driven are our non-stopping business philosophy. Zeayeto is always innovating technology and aiming to became a famous international brand in the automotive maintenance industry.

Zeayeto Business philosophy: Technology Driven、Customer Oriented、Quality Focused.

Zeayeto Mission and target: 1、Providing reliable products Zeayeto assists its customers achieve sustainable economic benefits.

2、To be a famous international brand in the automotive maintenance industry.

Zeayeto Values: Innovation、Professional、Cooperation、Concentration、Responsibility、All Win.