Single Arm Package Drop Tester For Free Fall Test Face , Corner And Edge Package

Single Arm Package Drop Tester For Free Fall Test Face , Corner And Edge Package​

Product Usage:

Single-arm drop tester This machine is designed to test the damage of the product package from falling, and to evaluate the impact strength during transportation and handling.


Design applicable standards:

ISO2248 JISZ0202-87 GB/T4857.5-92


product description:

The single-wing drop tester can perform free drop test on the face, corner and edge of the package. It is equipped with a digital height display and a height tracking using a decoder to accurately give the product drop height and the preset drop height. The error does not exceed 2% or 10mm. This machine adopts single-arm and double-column structure, with electric reset, electric control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, stability and safety of one-arm setting, which is convenient Place the product, the angle between the angle of impact of the drop angle and the plane of the bottom plate is less than or equal to 5°.


Working principle:

The drop test machine is used to simulate the different edges, angles and faces of the product when it is dropped on the ground, so as to understand the damage of the product and evaluate the fall height and impact resistance of the product packaging components when falling. strength. Therefore, according to the actual situation of the product and the national standards, improve and improve the packaging design. This test machine is specially designed to test the damage of various products after being packaged or transported in various kinds of products. In order to prevent damage in advance, the machine can be used to predict the test. The best solution is to minimize the loss during transportation, as well as to assess the impact strength of electronic components that are dropped during handling; the reliability of the packaging container can be tested.


The main technical parameters:

1. drop height mm: 300-1500 adjustable

2. The maximum weight of the test piece is kg: 0-80Kg;

3. Thickness of the bottom plate: 10mm (solid iron plate)

4. the largest size of the test piece mm: 800 x 800 x 1000

5. impact panel size mm: 1700 x 1200

6. the arm size mm: 160 * 250 * 10

7. drop height error: ± 10mm

8. test bench dimensions mm: about 1700 x 1200 x 2315

9. height display; LED meter digital display

10. test method: face, angle, edge all-round drop

11. Transmission mode: electric drive

12. Impact panel parallel error: ≤ 1 degree

13. The angle between the falling surface and the horizontal angle during the falling process: ≤1 degree

14. Power: 380V1, power supply: AC380V 50HZ

15. Power: 1.85KWA

16. Net weight kg: about 300kg;


Drop test bench structure:

1. The main column is made of special high-quality steel, which is processed by external grinding and external plating, durable and never rusting;

2. Taiwan ST special custom chain;

3. Really complete the face, edge and corner drop test;

4. Electric reset, electronically controlled drop and electric lifting device, easy to use;

5. Ensure that the cargo bracket and the packaged test piece are freely separated, and the free fall of the packaged test piece
is achieved, and the impact vibration is small, stable and reliable;

6. Configure the digital display height indicator and use the decoder for high tracking, so as to accurately give the product drop
height;

7. The error from the preset drop height does not exceed 2% or 10mm.


Precautions and maintenance items:

1. After each test, the falling arm should be dropped to avoid the long-reset drop arm to deform the spring, which affects the test
effect. Before each drop, please reset to the motor to stop rotating before pressing the drop button;

2. After the new machine is installed in the factory, it is necessary to add appropriate low-concentration oil to the sliding round
rod. It is strictly forbidden to add anti-rust oil or high-concentration oil and backlog with corrosive oil).

3. If there is dust in the oiling station for a long time, please lower the machine to the bottom, wipe the previous oil and re-oil it;

4. The drop machine is an impact mechanical device. When the new machine is used more than 500 times, the screws must be
tightened.


image:

Dongguan Jiedong Test Equipment Co., Ltd.

Business overview:

Dongguan Jiedong Test Equipment Co., Ltd. is located in Tangxia Town, Dongguan City. After years of hard work, Jiedong has established a production base in Dongguan, research and development, sheet metal, production, sales, after-sales, leasing, testing, and governance. With one-stop services such as import and export. The company has always focused on the technology and laboratory solutions of the most reliable reliability environmental testing equipment, and has become the national high-tech enterprise, the executive director unit of China Aerospace Systems Science and Engineering Research Institute, and the governing unit of Dongguan Metrology Association. lSO14001: 2015 environment, lSO9001: 2015 quality system certification. The products are constantly improving, and the customers are in the scientific and technological fields of scientific research, military industry, national defense, colleges, quality inspection, automobile, new energy, battery, optoelectronics, artificial intelligence, precision electronics, power tools, medical, communication, etc. After-sales service, each link takes the customer's point of view and needs as the starting point for thinking, and adheres to the line of excellence and continuous improvement.

Management mechanism:

Jiedong passed and strictly implemented the ISO9001:2008 quality management system, ISO14001-2004 environmental system certification, European CE product certification, OHSAS18001 occupational health and safety management system certification. Carefully implement GB, GJB, IEC, MIL, JB, ZBY and other product standards; Jiedong strictly follows the 7S management method and ERP mechanism, and explores the unique and effective specialization for the environmental test equipment industry's many years of characteristics and experience. The management methods of research, production, sales and service can provide customers with all kinds of ring test products and services with high quality, high efficiency and precision.

Main products:

※ Environmental simulation test equipment: constant temperature and humidity chamber, high and low temperature test chamber, thermal

shock test chamber, salt spray test chamber, xenon lamp aging test chamber, rain test Inspection box, ultraviolet aging test chamber, dust

test chamber, rain test chamber, high temperature precision oven, simulated transport vibration table, etc.;

※ Battery safety performance testing equipment: battery extrusion testing machine, battery needle testing machine, battery explosion-proof test

box, battery burning test box, high-altitude low-pressure mode Preliminary test chamber (low pressure test chamber), drop test machine,

heavy impact test machine, thermal shock test chamber (heat abuse test chamber), battery needle punching and extrusion Machine, battery

short-circuit test machine, battery washing test machine, seawater immersion test machine, battery pack reverse test machine, battery safety

performance comprehensive test laboratory, etc.;

※ Material mechanics testing equipment: electronic tensile testing machine, computerized tensile testing machine, universal testing machine,

high and low temperature tensile testing machine, four-point compression testing machine,Table type tensile testing machine, horizontal

tensile testing machine, etc.;

※ Mobile phone and notebook testing equipment: Click the line test machine, compression test machine, compression life test machine, twist

test machine, drop test machine, shaft life Life test machine, etc.

※ Wire testing equipment: wire bending (swinging, bending) testing machine, FPC folding test machine, wire bending resistance testing

machine, taper rocking test machine, line Material elongation (elongation) test machine, etc.;

※ Key detection equipment: button life test machine, switch rotation life test machine, button fatigue life test machine, fully automatic button,

switch load strokeLine testing machine, etc.

※ Terminal insertion and removal testing equipment: plug-in life testing machine, insertion force testing machine, fully automatic insertion force

testing machine, etc.;

※ Abrasion test equipment: anti-friction test machine, ink decolorization test machine, alcohol rubber wear test machine, etc.;

※ Leather and rubber testing equipment: TABER wear tester, Martindale wear tester, low temperature cold resistance tester, leather

endurance tester, color fastnessTesting machine, linear abrasion testing machine, rubber oil resistance testing machine, etc.;

※ Combustion test equipment: vertical horizontal burning test machine, needle flame burning test machine, glow wire test machine, automobile

interior material burning test machine, large-scale combustion Cabinet, leakage tracking test machine, etc.;

※ Other testing equipment: lithium battery moisture measuring instrument, falling ball impact testing machine, shotgun impact testing machine,

etc.;

Application areas:

Dongguan Jiedong Test Equipment Co., Ltd. has excellent research and development products, advanced equipment and complete testing means. The company has first-class technical talents and management talents, which makes the company's products always in a good position in the same industry. Dongguan Headquarters Factory is located in Dongguan City, which is known as the world factory with convenient transportation and developed manufacturing industry. Our products are widely used in scientific research, military, electronics, electrician, LED, automotive, plastic, hardware, toys, paper products, chemicals, household goods and other industries, and are applicable to various research units, quality inspection organizations, academic discussions and other fields. To provide customers with a variety of testing and testing equipment in line with national standards and related industry standards, international standards (GB, GJB, IEC, MIL, DIN), to achieve international quality, localized prices.

Phone: 86-0769-26265799

Address: No. 17, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City, China