High Altitude Temperature Test Chamber Low Pressure Simulation Test Box For Simulating
Brand Name:JIEDONG
Model Number:JD-6004
Minimum Order Quantity:1
Delivery Time:20 workdays after order confirmed
Payment Terms:L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow
Place of Origin:Guangdong, China
Contact Now
Add to Cart
Active Member
Location:
Dongguan Guangdong China
Address:
No. 17, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
High altitude low pressure simulation test box for simulating plateau ambient air pressure
product description:
The test cabinet is designed for UL, EN, IEC and other standard
test requirements. It can reach the low pressure storage state of
the sample in a short time, and can automatically control the test
cycle. The whole process monitors the pressure change in the tank
to realize the automatic termination of the test. The simulated
battery and battery pack are stored for 6 hours at a pressure equal
to or lower than 11.6 kPa and an ambient temperature of (20 ± 5)
°C. If the battery has no leakage, no venting, no disintegration,
no cracking and no fire, and each The test circuit or battery pack
has an open circuit voltage of not less than 90% of its voltage
before the simulation test, which is acceptable.
Fulfill the standard:
GB/T 31485-2015 "Safety Requirements and Test Methods for Power
Battery for Electric Vehicles"
GB/T 31241-2014 "Safety Requirements for Lithium Ion Batteries and
Battery Packs for Portable Electronic Products"
UN38.3 United Nations Handbook on Testing and Standards for the
Transport of Dangerous Goods
IEC62133 "Batteries (groups) consisting of cells and safety
requirements for portable devices"
UL 1642:2012 Lithium Battery Standard
UL 2054: 2012 Household and Commercial Battery Packs
IEC 62281: 2004 Safety requirements for the transportation of
lithium primary batteries and accumulators
Equipment structure features:
| Inner box material | SUS201# stainless steel, thickness 3mm |
| Outer box material | A3 cold plate paint, thickness 1.5mm; |
| Observation window | Size: 250x250mm two-layer vacuum tempered glass observation window |
| Box door | Single door left open |
| Door switch | Open and power off the threshold switch to ensure no mistakes and ensure personnel safety |
| Controller | Independent research and development of force control system |
| Casters | There are four universal casters under the device, which can move freely |
Equipment technical parameters:
1. Inner box material: SUS201# stainless steel, thickness 3mm;
2. the outer box material: A3 cold plate paint, thickness 1.5mm;
3. pressure range: 0.5 ~ 100Kpa, commonly used test pressure 11.6
Kpa;
4. the inner box size: W400xH400xD400mm
5. the outer box size: W550xH1200xD550
6. storage partition material: stainless steel;
7. Vacuum degree display: digital display vacuum gauge control,
accurate display of vacuum degree, easy to set vacuum degree;
8. Timer: LED digital display, freely set in 0-9999H (H/M/S seconds
can be switched);
9. pressure fluctuations: ≤ 5%;
10. Power supply for equipment: AC380V, 50HZ, 2.2KW;
11. The temperature inside the test box must be reached by
controlling the internal temperature of the laboratory (20 °C + 5
°C).
Equipment use conditions:
1. Laboratory temperature range: 0~35°C;
2. Relative humidity: no more than 85%;
3. large air pressure: no strong vibration around 86 ~ 106Kpa;
4. Direct sunlight or direct exposure to other heat sources;
5. the use of power: 220V reliable connection(Voltage adapter can
be used when the voltage is different).
List of basic components of equipment:
| Name | Brand | Origin |
| Vacuum pump | Leybold | Guangdong |
| Vacuum gauge | SMC | Japan |
| Timer | Omron | Shanghai |
| The electromagnetic valve | Senya | Ningbo |
Product Image:
High Altitude Temperature Test Chamber Low Pressure Simulation Test Box For Simulating
Inquiry Cart
0