Laboratory Salt Spray Test Chamber Jd-200 NSS ACSS 47℃±1℃ Pressure Tank Temperature

Laboratory Volume 1200l Salt Spray Test Chamber Jd-200 Salt Spray Test Machine

JD-200 salt spray test machine technical parameters

Scope of application:

The salt spray test machine is used for the surface treatment of various materials, including coatings, electroplating, organic and inorganic coatings, anodizing, anti-rust oil and other anti-corrosion treatments to test its corrosion resistance, thus establishing the quality of the product.

Model and name:

JD-200 salt spray test machine

First, salt spray test box JD-200 specifications

Internal dimensions 2000×1000×600 (L×W×H)mm

External dimensions 2800*1250*1350 (L×W×H)mm

Laboratory temperature NSS ACSS 35°C±1°C/ CASS 50°C±1°C

Pressure tank temperature NSS ACSS 47°C±1°C/ CASS 63°C±1°C

Laboratory volume 1200L

Salt water tank volume 50L

Compressed air pressure 1.00 ± 0.01kgf / cm2

Spray volume 1.0-2.0ml/80cm2.h

Laboratory relative humidity above 85%

Second, the salt spray test box JD-200 features:

1. The inner and outer frames are made of imported gray 8mmP.V.C plate, the bottom plate is made of 8mm plate, special treatment of corrosion-resistant plastic steel V-shaped frame and stainless steel pipe angle storage, to ensure that the sample is 30 degree oblique angle, six-wheel sliding, can be pushed away.

2. Fine workmanship, beautiful appearance, high transparency, pneumatic opening.

3. Automatic/manual watering system with automatic/manual water replenishment when the water level is insufficient. The experiment is not interrupted to meet the diverse environmental requirements of the guests. (Automatic hydration only needs to access the water pipe)

4. Nozzle: The spray tower is equipped with a cone disperser, which has the functions of guiding the mist, adjusting the amount of fog, and evenly fogging.

5. Adopt high-precision multi-function timer, test time can be set to multi-function. With power-off memory function, incoming call

Continue to work before the power failure, until the product is completed, and avoid the experiment after the power failure.

6. In the salt spray experiment, the steam is directly heated, the heating rate is fast, the temperature distribution is uniform, and the standby time is shortened.

7. Two-button automatic operation. With a full detection failure warning system. When the fault occurs, it can be illuminated and beep.

8. Two built-in mist collection cylinders are used. It is less susceptible to damage than traditional external models.

9. With overload protection. Prevent damage to the instrument and the internal electronic control accessories of the instrument when an abnormality occurs.

10. The inner and outer cabinets are connected to the sealing groove and sealed with water to prevent salt spray from leaking out.

11. The imported temperature controller uses digital display, PID control, error ± 0.1 °C.

12. Temperature range:

(1) Laboratory temperature: 35 ° C - Pressure tank temperature: 50 ° C (can be set arbitrarily)

(2) Laboratory temperature: 47 ° C - pressure barrel temperature: 63 ° C (can be set arbitrarily)

13. The reagent refilling bottle adopts a hidden water-filled perspective window, which is easy to clean and is not easy to be broken.

14. Heating rate:

(1)laboratory, room temperature --- → 35 ° C for about 35 minutes

(2) Pressure tank, normal temperature---→47°C, about 15 minutes

15. Temperature accuracy: ±1 °C

Applicable international standards: RELATEU STANDARDS CNS 3627, 3885, 4159, 7669, 8866; JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO3768, 3769, 3770; ASTM B-117, ASTM B-268 GB-T2423, GJB200.

Third, salt spray test box JD-200 control panel and electrical accessories:

Fourth, the internal device:

Five, random attachments:

Sixth, service commitment

The whole machine provides 12 months free warranty, lifetime maintenance (except for human reasons and force majeure factors)

(Product Image)

Dongguan Jiedong Test Equipment Co., Ltd.

Business overview:

Dongguan Jiedong Test Equipment Co., Ltd. is located in Tangxia Town, Dongguan City. After years of hard work, Jiedong has established a production base in Dongguan, research and development, sheet metal, production, sales, after-sales, leasing, testing, and governance. With one-stop services such as import and export. The company has always focused on the technology and laboratory solutions of the most reliable reliability environmental testing equipment, and has become the national high-tech enterprise, the executive director unit of China Aerospace Systems Science and Engineering Research Institute, and the governing unit of Dongguan Metrology Association. lSO14001: 2015 environment, lSO9001: 2015 quality system certification. The products are constantly improving, and the customers are in the scientific and technological fields of scientific research, military industry, national defense, colleges, quality inspection, automobile, new energy, battery, optoelectronics, artificial intelligence, precision electronics, power tools, medical, communication, etc. After-sales service, each link takes the customer's point of view and needs as the starting point for thinking, and adheres to the line of excellence and continuous improvement.

Management mechanism:

Jiedong passed and strictly implemented the ISO9001:2008 quality management system, ISO14001-2004 environmental system certification, European CE product certification, OHSAS18001 occupational health and safety management system certification. Carefully implement GB, GJB, IEC, MIL, JB, ZBY and other product standards; Jiedong strictly follows the 7S management method and ERP mechanism, and explores the unique and effective specialization for the environmental test equipment industry's many years of characteristics and experience. The management methods of research, production, sales and service can provide customers with all kinds of ring test products and services with high quality, high efficiency and precision.

Main products:

※ Environmental simulation test equipment: constant temperature and humidity chamber, high and low temperature test chamber, thermal

shock test chamber, salt spray test chamber, xenon lamp aging test chamber, rain test Inspection box, ultraviolet aging test chamber, dust

test chamber, rain test chamber, high temperature precision oven, simulated transport vibration table, etc.;

※ Battery safety performance testing equipment: battery extrusion testing machine, battery needle testing machine, battery explosion-proof test

box, battery burning test box, high-altitude low-pressure mode Preliminary test chamber (low pressure test chamber), drop test machine,

heavy impact test machine, thermal shock test chamber (heat abuse test chamber), battery needle punching and extrusion Machine, battery

short-circuit test machine, battery washing test machine, seawater immersion test machine, battery pack reverse test machine, battery safety

performance comprehensive test laboratory, etc.;

※ Material mechanics testing equipment: electronic tensile testing machine, computerized tensile testing machine, universal testing machine,

high and low temperature tensile testing machine, four-point compression testing machine,Table type tensile testing machine, horizontal

tensile testing machine, etc.;

※ Mobile phone and notebook testing equipment: Click the line test machine, compression test machine, compression life test machine, twist

test machine, drop test machine, shaft life Life test machine, etc.

※ Wire testing equipment: wire bending (swinging, bending) testing machine, FPC folding test machine, wire bending resistance testing

machine, taper rocking test machine, line Material elongation (elongation) test machine, etc.;

※ Key detection equipment: button life test machine, switch rotation life test machine, button fatigue life test machine, fully automatic button,

switch load strokeLine testing machine, etc.

※ Terminal insertion and removal testing equipment: plug-in life testing machine, insertion force testing machine, fully automatic insertion force

testing machine, etc.;

※ Abrasion test equipment: anti-friction test machine, ink decolorization test machine, alcohol rubber wear test machine, etc.;

※ Leather and rubber testing equipment: TABER wear tester, Martindale wear tester, low temperature cold resistance tester, leather

endurance tester, color fastnessTesting machine, linear abrasion testing machine, rubber oil resistance testing machine, etc.;

※ Combustion test equipment: vertical horizontal burning test machine, needle flame burning test machine, glow wire test machine, automobile

interior material burning test machine, large-scale combustion Cabinet, leakage tracking test machine, etc.;

※ Other testing equipment: lithium battery moisture measuring instrument, falling ball impact testing machine, shotgun impact testing machine,

etc.;

Application areas:

Dongguan Jiedong Test Equipment Co., Ltd. has excellent research and development products, advanced equipment and complete testing means. The company has first-class technical talents and management talents, which makes the company's products always in a good position in the same industry. Dongguan Headquarters Factory is located in Dongguan City, which is known as the world factory with convenient transportation and developed manufacturing industry. Our products are widely used in scientific research, military, electronics, electrician, LED, automotive, plastic, hardware, toys, paper products, chemicals, household goods and other industries, and are applicable to various research units, quality inspection organizations, academic discussions and other fields. To provide customers with a variety of testing and testing equipment in line with national standards and related industry standards, international standards (GB, GJB, IEC, MIL, DIN), to achieve international quality, localized prices.

Phone: 86-0769-26265799

Address: No. 17, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City, China