

Add to Cart
Features:
1. AC input range selectable by switch
2. Protections: Short circuit / Overload / Over voltage
3. Cooling by free air convection
4. LED indicator for power on
5. 100% full load burn-in test
6. High efficiency, long life and high reliability
7. 2years warranty
8. CE & Rohs certifications
Parameters
parameter Item No. | S-80-5 | S-100-12 | S-100-15 | -100-24 | |||
OUTPUT | DC Output Voltage | +5V | +12V | +15V | +24V | ||
Output Rated Current | 16A | 8.5A | 6.7A | 4.5A | |||
Output Current Range | 0- 16A | 0-8.5A | 0- 6.7A | 0-4.5A | |||
Rated power | 80W | 102W | 100.5W | 108W | |||
Ripple | 100mVp-p | 100mVp-p | 150mVp-p | 150mVp-p | |||
ADJ.output range | ±10% | ||||||
OutputAccuracy | ±1% | ||||||
Line Regulation | ±0.5% | ||||||
Load Regulation | ±0.5% | ||||||
Set up,Rise,Hold up time | 50ms,50ms,20ms | ||||||
INPUT | Input Voltage range | 90~132V/180~264VAC;200~360V DC | |||||
Input current | 2.5A/115V;1.2A/230V | ||||||
Input frequency | 47~63Hz | ||||||
Efficiency | 78% | 84% | 84% | 85% | |||
Inrush current | 40A@230V | ||||||
Leakage Current | <0.5mA@240V | ||||||
Over Temp.protection | Over load protection | 105~150%,Hiccup,automatic recovery | |||||
SHORT CIRCUIT | Hiccup,automatic recovery | ||||||
Over voltage | 6~7V | 15~17V | 18~20V | 30~33V | |||
ENVIRONMENT | Working Temp.,Humidity | -10~50℃,10~90% RH,No condensation | |||||
Storage Temp.,Humidity | -20~85℃,10~95% RH. | ||||||
Temp.Coefficeent | ±0.03%/℃(0~50℃) | ||||||
Vibration | 10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACHAXES | ||||||
SAFETY&EMC | Safety standards | GB4943 EN60950 | |||||
Pressure | I/P-O/P,I/P-FG:1.5KV;O/P-FG:0.5KV DC 1min. | ||||||
Insulation resistance | I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms | ||||||
EMC standards | GB9254,EN55022 CLASS B | ||||||
OTHER | Demension | 159*98*38mm CASE:K807 | |||||
Weight | 0.5Kg |
Note: | 1. All parameters 230VAC input, rated load, ambient temperature 25
℃, measured under conditions of 70% humidity; 2.Accuracy: includes set up tolerance, line regulation, load regulation and so on; 3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end; 4. Line regulation: at rated load conditions, the input voltage changes from low to high measured; 5. Load regulation: the measured output load from 0 to 100% load change measured. |