Wear Resistant Tricone Roller Bit , TCI Tricone Bits For Drilling Blast Hole

Wear Resistant Tricone Drill Bit For Mining Industry And Drilling Blast Hole

Click here for catalogueTCI DRILL BIT.pdf

Our Company

Hunan Tianying Drilling Machine Manufacturing Co., Ltd is a professional Rock Drilling Bits manufacture, we supplies series of TCI Tricone bits for drilling in soft formation to very hard formation, available in both open-air bearing type or sealed bearing type. Under our R&D team’s constant product development, our Rotary Rock Drilling Bits are renowned for their great reliability, excellent and even quality and long services life with an expertise direct to any corner of the world.All bits the above are manufactured according to strict standards, set forth by the American Petroleum Institute (API). And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC).

This Series Of Rock Roller Bits Can Apply For Drilling Hard To Very-Hard Formation.
Application : For use in abrasive consolidated formations with compressive strength above 400 Mpa such as taconite, quartzite and banded iron formations
Cutting structure: These bits are characterized by closely spaced conical or spherical inserts with medium to low projection. This configuration promotes good penetration rates in hard, consolidated and very abrasive formations. Smaller carbide inserts are provided on the gage and inner rows or hard metal is deposited in the nose area to contain shell erosion and improve performance.

• Compression Strength: 60,000 – 100,000 psi
• Drilling Speeds: 50 – 90 rpm
• Jet Circulation: All sizes
• Weight on Bit (WOB): 4,000 – 7,500 lbs/in of bit diamete

What is Tricone Drill Bit ?

1. A roller cone or tricone rock bit consists of a bit body with three moveable conical rollers equipped with cemented carbide inserts.
2. The idea is the crush the rock by rolling the inserts against the rock with appropriate rotation speed and feed force.
3. Carbide inserts are distributed over the three rollers in such a manner that the entire bottom of the hole is worked on when the drill bit is rotated.
4. Roller bits for hard and abrasive rock generally have spherical cemented carbide inserts closely spaced.
5. Roller bits for softer rock may have the chisel and conical carbide teeth or quality milled steel teeth as the cutters.
6. Three types of cemented carbide inserts are used for roller type bits being Chisel, Conical, and Hemispherical.
7. A roller bit will utilize nozzles from which the compressed air escapes to lift the cuttings from the bottom of the hole.

CUTTING SELECTION GUIDE

Advantage:

1. Optimized cutting structure and bearing geometry to distribute load .
2. More uniformly distributed load over bearings.
3. Smoother bit performance .
4. Sustained penetration rate over longer periods of time .
5. Reduced risk of bearing failure .
6. Streamlined lug manages.
7. larger drill cuttings.
8. Higher penetration rate Less regrinding of cuttings to smaller pieces.
9. Less bit wear.
10. Full body armor minimizes wear on bit body and shirttail.

Tianying's Best Service
1. 365×24 Year-round Service,We are committed to year-round 24-hour service even during holidays.
1. Provide professional technical services, including products introduction, selecting and problem solution etc.
3. Within 35 Working Days Quick Delivery.

Professional. Duarable, Efficient, TIANYING TCI Tricone Bit!
Hunan Tianying Drilling Machine Manufacturing Co., Ltd.is one state-appointed factory of mining tools especially for tricone bit. we are established in 1958 and located at Zhuzhou city of Hunan provice. one famous heavy industrial base of China. covering the land area of more than 800 acres with total asset of RMB130 Million and over 100 staffs.

we have advanced full-equipped tricone bits and rockdrilling tillsmanufacturing workshops, high frequency welding workshop.heat treatment workship. mould equipment making workshop and the various departments of measurement. quality control. technology R&D center. the tatal main equipments amount to over 300 sets andthe annual production volume for tricone bits is 5000pcs for other rock drilling tools is over 1400000 pieces.

we have partners all over the world like America. Europe.Australia.South Africa. UAE. Brazil and so on.

To get Tianying TCI Drill Bit news direct, follow us on LinkedIn, Facebook and Twitter.