50Hz AC 300kw Natural Gas Generator , 300kw Biogas Generator Set

50Hz AC 300kw Natural Gas Generator , 300kw Biogas Generator Set

Quick details

1. Gas Generator:Cummins Gas Engine With Stamfrod Alternator
2. Continuous Power(kW/KVA):300/375
3. Output Voltage (V):400V/240V,3 Phase 4 Wire
4. electronic-control ignition system

Specifications:

1. Low pressure gas intake, biogas no need boosting pressure
2.Accetable gas pressure : 2-10kpa
3. Electronic Air/Gas mixer

Main Performance Advantages:

1. Long life span. gas engine is designed and developed through the cooperation between China Cummins

. Based on Cummins durable engine body, the gas engine life span reaches 30 years.

2. Long designed overhaul term: 25000 ~ 30000 hours.

3. Total cogeneration efficiency is over 85%, higher than other China brands by 10%.

4. Four air valves designing for each cylinder. Sufficient air intaking and exhausting to realize maximum power output.

5. Easy access to spare parts. Based on Cummins engine body, almost 85% parts are made in Cummins factory. it's very convenient to find any parts at any time and anywhere.

6. Electronic Air/Gas mixer. The mixer guarantees optimum air-fuel ratio, improves thermal efficiency, reduces NOx emission. Unique air-fuel ratio adjusting system suits 30% ~ 90% methane density.

7. Ignition system. Altronic ignition system imported from USA ensures high-precision ignition, which enhances genset life span and stability.

Alternator Features:

1. World famous brand AC alternator: Leroy Somer, Stamford, Marathon, ENGGA

2. Brushless, 4 poles, rotation magnet

3. IP21-23(NEMA1) enclose is standard for all industrial alternators

4. H class insulation system

5. AVR self-regulated, voltage regulation rate: ≤±1%

6. Simple installation and maintenance with easy access to terminals, rotating diodes and coupling bolts

7. Wide range of flange adaptors and single bearing disc coupling

8. Radio interference restraining accords with the stipulation of VDE0875-N and ISO8528

9. Moisture proof, sand-proof, dustproof, salt-proof and vibration-proof

Digital Control panel

Controller Brand: Smartgen, Deepsea,ComAp

Control Panel: English interface,LED screen and touch buttons.

Main Functions:

1- Display loading power, voltage, currenct, frequency, speed, temperature, oil pressure, running time etc.

2- Warning when low or high voltage, low or high frequency, over current, over or low speed, low or over battery voltage etc.

3- Over load protection, over/under frequency protection, over/under/imbalance voltage protection, and low oil shutdown

Standard Scope of Supply

1. Brand new Gas engine .

2. Brand new Leroy Somer AC brushless alternator IP23

3. Smartgen Control Panel.

4. Ignition system,including: ECU, Spark plug, High-voltage electricity wire;Ignition switch,Ignition coil;Wires.

5. Electronic speed regulator,including controller and actuator.

6. Solenoid valve

7. Flame arrester.

8. Hand valve

9. Zero pressure valves

10. Mixer.

11. Air filter.

12. Silencer

13. Remote radiator

14. Air circuit breaker (For the protecting purpose of overload, over current, etc)

15. Rubber anti-vibration pad between engine, alternator, control panel and base frame

16.Standard accessories, anti-vibration pad, exhaust pipe, maintenance tools kit, filters

17. Maintenance Operating manual, Quality certificate, Gen-sets ex-factory test report

Genor Power Equipment Co., Ltd is a Chinese factory producing engine driven welder ,diesel generator set, gas generator set, Marine generator ,silent generators, trailer generators, lighting tower generators, industrial ceiling fan and other industrial equipments.

The welder is from 160A to 1000Amps . The generator power range is from 5KVA to 3000KVA. We also provide relevant accessories processing , and customized generator producing (OEM)service.

Our factory was set up in 2000 and Located in Shenzhen,Guangdong Province,the most advanced area of manufacturing in China.
With the development , we have built the other factory in Shangdong province and have standard assemble workshop, spray paint workshop, sheet-metal workshop and loading testing workshop. we also have advanced equipment such as CNC punching machine, Bending machine, Laser cutting machine, Hydraulic shear machine, Digital Machine Tool, and Electronic Testing system.

Now, We have 3 Chief engineers, 5 Senior Mechanical Engineers, 5 Senior Electrical Engineers and more than 50 technic employees.

Our factory has obtained ISO9001: 2008 certificate, ISO9001:2004 environment certificate ,CE and CCC certificate.

Our Vision:
Providing the most satisfactory products and services for clients.

Our Exhibition

Customer Visiting

Certification