Add to Cart
Seamless stainless steel heat exchanger tubing SA213 TP347H Cold Drawn Pickled
Type 347 stainless steel has slightly improved corrosion resistance
over type 321 stainless steel in strongly oxidizing environments.
Type 347 is stabilized with columbium, it is preferable for aqueous
and low temperature environments due to its good resistance to
intergranular attack. Both 347 and 321 offer good resistance to
polythionic acid stress corrosion cracking, encountered in oil
refineries. The high temperature oxidation resistance of 347 is
similar to that of 304 stainless steel. Useful to 1500°F.
Stainless Steel Tube Standards:
American standards:
ASTM A249: Standard specification for welded austenitic steel
boiler,superheater, heat-exchanger and condenser tubes.
ASTM A269:Standard specification for welded austenitic stainless
steel tubing for general service.
ASTM A688:Standard specification for welded austenitic stainless
steel feedwater heater tubes.
ASTM A554:Standard specification for welded stainless steel
mechanical tubing.
ASTM A268:Specification for seamless and welded
Ferritic/Martensitic stainless steel tubing for General Service
ASTM A789:Specification for seamless and welded Ferritic/Austenitic
stainless steel tubing for General Service
ASTM A312:Seamless/Welded austenitic stainless steel pipe
Germanic standards:
DIN17455:General purpose welded circular stainless steel tubes
DIN17457: Welded circular austenitic stainless steel tubes subject
to special requirements; technical delivery conditions
European Standard:
EN 10217-7:Welded Steel Tubes for pressure purposes-Part 7
Stainless steel tubes
U-Bent Tubes
Additional Testing
We are equipped to carry out heat treatment of bends plus a minimum
150mm of leg.
Heat Treatment Equipment
SA-213-TP347H
Seamless ferritic and austenitic alloy steel boiler, superheater, and heat exchanger tubes
Chemical Properties:
Carbon: 0.04-0.10 | Silicon: 0.75 max |
Manganese: 2.00 | Nickel: 9.00-13.0 |
Potassium: 0.04 | Chromium: 17.0-20.0 |
Sulfur: 0.03 | Molybdenum: n/a |
Mechanical Properties:
Tensile Strength:
ksi: 75
MPa: 517
Yield:
ksi: 30
MPa: 207
Elongation in 2in. or 50mm, min. %: 35
Max. Hardness Rockwell B: 90
Standard Dimensions - U-Bent Tube | ||
---|---|---|
Outside diameter | 6 ÷90 mm | ¼”÷3 ½” |
Maximum overall length | 1 ÷ 28 m | 3 ÷ 92 ft |
Bending Radius Min. | 1,5 × tube diameter | |
Bending Radius Max. | 1500 mm | 4ft |
Inspections and Tests - U-Bent Tube |
---|
Chemical Composition |
Mechanical Properties |
Hydrostatic Test |
Pneumatic Test |
Eddy Current Test |
Dye Penetrant Test |
Magnetoscopic Test |
Heat Treatment Conditions |
---|
Stress-Relieved Anneal |
Annealed (Bright Annealing) |
Materials - U-Bent Tube | |
---|---|
Carbon Steel | SA 179 / A 179 |
Carbon Steel | SA 210 / A 210 |
Carbon Steel | SA 334 / A 334 |
Stainless Steel | SA 213 / A 213 |
SA249 / A249 | |
SA268 / A268 | |
SA688 / A688 | |
Duplex Stainless Steel | SA 789 / A 789 |
Copper & Cu Alloys | SB 111 / B 111 |
Titanium & Ti Alloys | SB 338 / B 338 |
For different materials please contact our sales department. |