Mechanical Welded Titanium Tubing Seamless Grade 2 UNS R50400 ASME SB337
Brand Name:SPEZILLA
Certification:ISO9001
Model Number:GR.2
Minimum Order Quantity:Negotiation
Delivery Time:15 DAYS
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
H.Q.803, No.18 Baosheng Road, Songjiang, Shanghai, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
UNS R50400 ASME SB337 Titanium Pipe Seamless Mechanical Tubing Titanium Grade 2
Titanium Grade 2 has moderate strength and excellent cold forming properties. It provides excellent welding properties and has excellent resistance to oxidation and corrosion.
Moderate Strength Titanium
Excellent Cold Formability
Excellent Weldability
Excellent Resistance to High Oxidation
Applications:
Bellows, aircraft structural, honeycomb, gaskets, aircraft skin, heat exchanger parts.
Description:
Commercially Pure Grade 2 is slightly stronger than Grade 1 but equally corrosion resistant against most applications. Best strength to weight ratio of any corrosion resistant material. This grade is one of the most common Titanium Grades and is used for Heat exchangers, condenser tubing and bleaching plants in paper industry, offshore oil installation water pipe lines. Can be used for parts requiring strength up to 400°F and oxidation resistance to 600°F.
Chemistry Typical:
Titanium: Balance
Iron: 0.30 max
Oxygen: 0.25 max
Carbon: 0.10 max
Nitrogen: 0.03 max
Hydrogen: 0.015 max
Residuals each 0.10 max, total 0.40 max
Physical Properties:
Density, 0.163 lbs/in³ , 4.51 g/cm³
Mean Coefficient of Thermal Expansion, in/in/°F (mm/m/°C):
70- 212°F (20- 100°C): 4.78 x 10-6 (8.6)
Thermal Conductivity: BTU-in/h-ft-°F (W/m-°K):
At 70°F (21°C): 114(16.4)
Modulus of Elasticity, ksi (MPa)
15.2 x 10³(105 x 10³) in tension
Melting Point : 3040°F (1670°C)
Properties: Annealed
Ultimate Tensile Strength: 50 KSI min (345 MPa min)
Yield Strength (0.2% offset): 40-65 KSI (276-448 MPa )
Elongation: 20% min
Properties: Tempered
Titanium Grade 2 can be cold rolled to various tempers. Contact
Ulbrich Technical Service for additional information.
| Type of product | Grade(s) | Technical requirements* according to |
|---|---|---|
| Titanium tubes and pipes | Ti and Ti alloy grades 1, 2, 3, 7, 9, 11, 12, 16, 17, 26 and 28 | ASTM B337, ASTM B338, ASME SB338 NACE MRO 175-94 VdTÜV 230/2 Dimensional tolerances acc. to DIN 17861 D3/T3 or closer |
| Grade | Description |
|---|---|
| Ti Grade 1 | Relatively low-strength and high-ductility pure titanium (Cp). |
| Ti Grade 2 | Medium-strength pure titanium (Cp). |
| Ti Grade 3 | High strength pure titanium (Cp). |
| Ti Grade 7 | Medium-strength Pd-alloyed titanium for enhanced corrosion properties. |
| Ti Grade 9 | High-strength titanium alloyed with 3% Al and 2.5% V. |
| Ti Grade 11 | Low-strength titanium plus 0.12-0.25% Pd for enhanced corrosion properties. |
| Ti Grade 12 | High-strength titanium alloy plus 0.3% Mo and 0.8% Ni for enhanced corrosion properties. |
| Ti Grade 16 | Medium-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
| Ti Grade 17 | Low-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
| Ti Grade 26 | Medium-strength titanium plus 0.08-0.14% Ru for enhanced corrosion properties. |
| Ti Grade 28 | High-strength titanium alloy plus 3% Al, 2.5% V and 0.08%-0.14% Ru for enhanced corrosion properties. |
Mechanical Welded Titanium Tubing Seamless Grade 2 UNS R50400 ASME SB337
Inquiry Cart
0