Round Nickel Alloy Pipes Seamless Alloy 400 ASTM B444 UNS N06625 EN10204 3.1
Brand Name:SPEZILLA
Certification:ISO9001:2008
Model Number:INCONEL 625
Minimum Order Quantity:Negotiation
Delivery Time:60 DAYS
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
H.Q.803, No.18 Baosheng Road, Songjiang, Shanghai, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
ASTM B444 UNS N06625 Nickel Alloy Pipes Seamless Alloy 400 Tubing
Description:
Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. This nickel alloy has excellent weldability and is frequently used to weld AL-6XN. This alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Some typical applications Inconel 625 is used in are chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.
Characteristics:
Excellent mechanical properties at both extremely low and extremely
high temperatures.
Outstanding resistance to pitting, crevice corrosion and
intercrystalline corrosion.
Almost complete freedom from chloride induced stress corrosion
cracking.
High resistance to oxidation at elevated temperatures up to 1050C.
Good resistance to acids, such as nitric, phosphoric, sulfuric and
hydrochloric, as well as to alkalis makes possible the construction
of thin structural parts of high heat transfer.
Fabrication with Inconel 625:
Alloy 625 has excellent forming and welding characteristics. It may be forged or hot worked providing temperature is maintained in the range of about 1800-2150° F. Ideally, to control grain size, finish hot working operations should be performed at the lower end of the temperature range. Because of its good ductility, alloy 625 is also readily formed by cold working. However, the alloy does work-harden rapidly so intermediate annealing treatments may be needed for complex component forming operations. In order to restore the best balance of properties, all hot or cold worked parts should be annealed and rapidly cooled. This nickel alloy can be welded by both manual and automatic welding methods, including gas tungsten arc, gas metal arc, electron beam and resistance welding. It exhibits good restraint welding characteristics.
Applications:
Components where exposure to sea water and high mechanical stresses
are required.
Oil and gas production where hydrogen sulfide and elementary sulfur
exist at temperature in excess of 150C.
Components exposed to flue gas or in flue gas desulfurization
plants.
Flare stacks on offshore oil platforms.
Hydrocarbon processing from tar-sand and oil-shale recovery
projects.
ASTM Specifications:
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
|---|---|---|---|---|---|---|---|---|
| B444 | B705 | B444 | B704 | B443 | B446 | - | - | - |
Mechanical Properties:
Representative Tensile Properties, bar, 1800° F anneal
| Temp° F | Tensile (psi) | .2% Yield (psi) | Elongation in 2 “ (%) |
|---|---|---|---|
| 70 | 144,000 | 84,000 | 44 |
| 400 | 134,000 | 66,000 | 45 |
| 600 | 132,000 | 63,000 | 42.5 |
| 800 | 131,500 | 61,000 | 45 |
| 1000 | 130,000 | 60,500 | 48 |
| 1200 | 119,000 | 60,000 | 34 |
| 1400 | 78,000 | 58,500 | 59 |
| 1600 | 40,000 | 39,000 | 117 |
Round Nickel Alloy Pipes Seamless Alloy 400 ASTM B444 UNS N06625 EN10204 3.1
Inquiry Cart
0