Add to Cart
kinds of seat valve for resilient seated butterfly valves
The rubber seats of all categories of midline values produced by SML are made of materials with good elasticity, excellent pressure variation, stable sizes, small torsion resistance, good sealing and material performance.
Size range: DN50(2inches) - DN1350(54 inches).
Basic characteristics of material NR
1. Unsaturated rubber, active chemical properties, can carry out addition and cyclization reaction, and sulfur, oxygen and other reactions, easy to react.
2. Non-polar rubber, none oil resistance.
3. Crystalline rubber has self-reinforcing properties and high elasticity.
4. Become glass state under -70 degrees.
5. With good comprehensive performance: high tensile strength, high elongation, low heat generation.
6. Good air permeability and electrical insulation.
8. Anti-aging and returning performance is poor, anti-aging system and vulcanization system and anti-reversion system should be considered when manufacturing products.
9. Use in tires: mainly used for tread of heavy-duty tires, truck tires and light trucks..
Certificates obtained:
IATF16949 quality management system, certififies include WRAS, EC1935, ACS, NSF61/372, KTW, W270, FDA, DVGW, EN681, RoHS, REACH... for the needs of different countries.
Heat / Cold Resistance of different rubbers
Rubber Name | Short Name | Heat Resistance ℃ | Cold Resistance ℃ |
Natural Rubber | NR | 100 | -50 |
Nitrle Rubber | NBR | 120 | -20 |
Polychloroprene | CR | 120 | -55 |
Styrene Butadiene copolyme | SBR | 100 | -60 |
Silicone Rubber | SI | 250 | -120 |
Fluororubber | FKM/ FPM | 250 | -20 |
Polysulfide Rubber | PS / T | 80 | -40 |
Vamac(Ethylene/Acrylic) | EPDM | 150 | -60 |
Butyl Rubber | IIR | 150 | -55 |
Polypropylene Rubber | ACM | 160 | -30 |
Hypalon. Polyethylene | CSM | 150 | -60 |