High Precision Overrunning Clutch Gcr15 Chrome Steel BS Series For Reducers Drawn Cup Needle Roller Clutch
Brand Name:NEKIB OR FUMSB
Certification:ISO9001,IATF16949
Model Number:AS series
Minimum Order Quantity:100
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou Jiangsu China
Address:
Room 3b-304, building 3, chuangyan port, science and education city, wujin district, changzhou city.
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
High precision Chrome Steel One way clutches BS series for Reducers(drawn cup needle roller clutch)
Decription of products:(drawn cup needle roller clutch)
The inner race is keyed to the shaft.
The outer race has a positive n6 tolerance to give a press fit in a
housing to H7. The housing must be strong enough to not expand
after assembly.
Drawing:(drawn cup needle roller clutch)
Catalogue of BS series:(drawn cup needle roller clutch)
| Model | Torque Capacity (N·m) | Max. Overrunning (r/min) Inner Race | Drag Torque (N·m) | A | B | C | PCD D | E | S | H-M Size× Pitch × No.of Tapped HoleS | Grease Filler Hole (Size) | Q'ty Grease (kg) | Weight (Kg) |
| BS30 | 294 | 350 | 0.58 | 64 | 90 | 64 | 80 | 45 | 13 | M6 ×P1.0×4 | - | - | 21 |
| BS50 | 784 | 300 | 0.98 | 67 | 125 | 67 | 110 | 70 | 16 | M8 ×P1.25×4 | - | - | 4.0 |
| BS65 | 1570 | 340 | 3.92 | 90 | 160 | 85 | 140 | 90 | 20 | M10 ×P1.5×6 | - | - | 11.5 |
| BS75 | 2450 | 300 | 5.88 | 90 | 170 | 85 | 150 | 100 | 20 | M10 ×P1.5×6 | - | - | 13.1 |
| BS85 | 5880 | 300 | 7.84 | 115 | 210 | 110 | 185 | 115 | 30 | M12 ×P1.75×6 | - | - | 24.7 |
| BS95 | 7840 | 250 | 9.8 | 115 | 230 | 110 | 200 | 130 | 30 | M14 ×P2.0×6 | - | - | 29.4 |
| BS110 | 10800 | 250 | 14.7 | 115 | 270 | 110 | 220 | 150 | 30 | M16 ×P2.0×6 | - | - | 34.2 |
| BS135 | 15700 | 200 | 19.6 | 135 | 320 | 130 | 280 | 180 | 30 | M16 ×P2.0×8 | - | - | 68 |
| Model | Torque Capacity (N·m) | Max. Overrunning (r/min) Inner Race | Drag Torque (N·m) | A | B | C | PCD D | E | S | H-M Size× Pitch × No.of Tapped Holes | Grease Filler Hole (Size) | Q'ty of Grease (kg) | Bore Diameter Range (mm) | W. Max kg | W. Min kg |
| BS160 | 24,500 | 100 | 33.1 | 130 | 360 | 130 | 315 | 220 | 40 | M20 × P2.5 ×10 | PT 1/4 | 0.12 | 100 to 160 | 98.1 | 85.6 |
| BS200 | 37,200 | 100 | 44.1 | 150 | 430 | 145 | 380 | 265 | 40 | M22 × P2.5 × 8 | PT 1/4 | 0.14 | 100 to 200 | 167 | 140 |
| BS220 | 49,000 | 80 | 73.5 | 235 | 500 | 230 | 420 | 290 | 40 | M20 × P2.5 ×16 | PT 1/4 | 0.8 | 150 to 220 | 301 | 264 |
| BS250 | 88,200 | 50 | 93.1 | 295 | 600 | 290 | 530 | 330 | 50 | M24 × P3.0 ×16 | PT 1/4 | 1.1 | 175 to 250 | 580 | 523 |
| BS270 | 123,000 | 50 | 98 | 295 | 650 | 290 | 575 | 370 | 50 | M24 × P3.0 ×16 | PT 1/4 | 1.2 | 200 to 270 | 620 | 562 |
| BS300 | 176,000 | 50 | 108 | 295 | 780 | 290 | 690 | 470 | 60 | M30 × P3.5 ×16 | PT 1/4 | 1.3 | 230 to 300 | 952 | 885 |
| BS335 | 265,000 | 50 | 137 | 305 | 850 | 320 | 750 | 495 | 70 | M36 × P4.0 ×16 | PT 1/4 | 1.4 | 250 to 335 | 1,140 | 1,040 |
| BS350 | 314,000 | 50 | 157 | 320 | 930 | 360 | 815 | 535 | 70 | M36 × P4.0×16 | PT 1/4 | 1.5 | 250 to 350 | 1,600 | 1,470 |
| BS425 | 510,000 | 50 | 216 | 440 | 1,030 | 450 | 940 | 635 | 70 | M36 ×P4.0 ×18 | - | Oil 6,000ml | 325 to 425 | 2,450 | 2,240 |
| BS450 | 686,000 | 50 | 245 | 450 | 1,090 | 480 | 990 | 645 | 80 | M42 × P4.5 ×18 | - | Oil 7,000ml | 350 to 450 | 2,820 | 2,580 |
Introduction of AS/NSS/TSS roller type one way clutch bearings:(drawn cup needle roller clutch)
Type NSS/TSS is a roller type freewheel non bearing supported.
Bearings are required to support axial and radial loads.
Lubrication and sealing must also be provided by the installation.
Nominal outside dimensions are the same as series 62...Ball
bearings.
A typical arrangement is to install this type alongside a series 62
bearing within the same location tolerances, as shown on the
following page. The inner race is keyed to the shaft (except 6 mm
bore).
The outer race has a positive r6 tolerance to give a press fit in a
H7 housing. The outer housing must be strong enough to not expand
after assembly. This design can accept an axial misalignment of
inner and outer race of ± S/2.
High Precision Overrunning Clutch Gcr15 Chrome Steel BS Series For Reducers Drawn Cup Needle Roller Clutch
Inquiry Cart
0