7000 MM Stroke Anchor Drilling Rig Machine 25 T Pull Capacity 1.5 Ton Winch
Brand Name:KonDaSin
Certification:ISO9001
Model Number:YDL-300DT
Minimum Order Quantity:1 set
Delivery Time:15 days
Place of Origin:Jiangsu,China
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Water Well Rig Anchor Rig 7000 M Stroke 25 T Pull Capacity 1.5 Ton Winch
1.YDL-300DT Hydraulic drilling rig which is aim to meet the demand
of deep water well hole project and seize the new market .It’s a
new,efficient,energy-saving and multifunctional full hydraulic
drilling rig.
2.There are two large cylinders on the mast so the lifting capacity
can reach 25T,it can pull casing pipe when drilling with casing and
it is also suitable for small non-excavation construction.
3.The feeding stoke of mast is 7m,it can use two 3m drill rods one
time,it can reduce the time of adding drill rod,also can reduce the
labour intensity.
4.This machine matches with 1.5ton winch can lift casing when
drilling.
The equipment,the drilling techniques way of the following:
a. Dry auger drill
b. Down-The-Hole hammer drill
c. Mud forward circle drill
d. Medium reverse circle drill
e. ODEX tools (casing pipe following) drill with DTH hammer
| Hole diameter | Φ150—Φ400mm | |
| Hole depth | 300-400 m | |
| Apply Rock hardness | ｆ=6—20 | |
| Air compressor pressure | 1.2—4MPa | |
| Air compressor flow | 16—50m3/min | |
Rotary speed | 0～25r/min,4,9,12,14,19,24, 25,28,38,48,50,63,76,101,127r/min | 0～39r/min,6,14,18,22,30,37,39,44,59,75,78,99, 119,159,200r/min |
| Torque N.M | 13900Nm(17MPa) | 10000Nm(17MPa) |
| Max Pull up capacity | 25T | |
| Pull up speed | 0-3m/min；3,3.74,7.54,15.08,18.1,21.84m/min | |
| Feeding capacity | 12.8T | |
| Feeding speed | 0-5.9m/min；5.9,7.34,14.78,29.57,42.83m/min | |
| Feeding cyliner stroke | 3500mm | |
| Max rotary head stroke | 7000mm | |
| Mast sliding stroke | 1500mm | |
| Mast working angle | -5～90° | |
| Min height to the ground | 360mm | |
| Winch pull up capacity | 1.5T | |
| Winch pull up speed | 20m/min | |
| Winch wireline dia | ф10mm | |
| Winch wireline length | 50m | |
| Platform turning method | Manul (pin) | |
| Crawler move speed | 1.5ｋm/h | |
| Climb ability | 25° | |
| Electric Motor | 55+18.5KW | |
| Diesel Type | 120kw,1500r/min | |
| Overall(L×W×H) mm | 7200×2100×2750(transportation) | |
| Weight | 10500kg | |
● Rotate speed is adjustable which make the drill available for
variety of drill techniques.
● There are two pieces of cylinder on the mast which make the pull
up capacity to 25T.
● The drill rig adopt telescoping mast.Stroke is 7m which is
available to use 6m drill rod
one time.
● Patent design of telescoping in output shaft will effectively
protect the drilling tools.
● The drill installed a hydraulic clamp & breakout system in
order to automatic wrench
the drill pipes and tools.
● Crawler chassis with turning platform system,make it easy and
rapidly to move. Rubber
crawler is optional.
● Drill rig adopt 4 pieces long jacks which is easy to load the
truck with no crane.
● The drill installed 1.5 ton winch.
7000 MM Stroke Anchor Drilling Rig Machine 25 T Pull Capacity 1.5 Ton Winch
Inquiry Cart
0