Non Return Check Valve with Dual Plate in Cast Iron , Wafer Type , PN 10

PRODUCT INTRODUCTION

Dual Plate Check Valve

The dual Plate Check Valve is an all purpose non return valve that is much stronger, lighter in weight and smaller in size compared to a conventional swing check valve or life check valve.

The Dual Plate Check Valve employs two spring-loaded plates hinged on a central hinge pin. When the flow decreases, the plates close by torsion spring action without requiring reverse flow. This design offers the twin advantages of No Water Hammer and Non Slam simultaneously. All features put together make the Dual Plate Check Valve one of the most efficient design. It is also referred as SILENT CHECK VALVE.

The valve dual plate check valve design conforms to APS 594 as well as API 6D except face to face dimensions of ANSI 125 cast iron valves of sizes 65mm (2½”) to 600mm (24”). Valve inspection and testing conforms to API 598.

MVS Dual Plate Check Valves are available in wafer design, flanged wafer design and extended design with flanged ends having face to face dimensions as that of a swing check valve.

Design & Testing International Standard of Dual Plate Check Valve NRV

MOC (Bill of Material – BOM)

Features

Light Weight thus easier handling and self supporting.

More compact & Structurally sound design.

Same valve can be installed horizontally or vertically.

Only Check Valve which can be installed for flow upside down due to spring assisted closure.

Low Pressure Drop and reduced Energy Loss irrespective of Pressure Ratings.

Streamlined flow – way.

Efficient and Positive sealing under most flow and pressure conditions. Valve close before flow reversal, at zero velocity.

Inherently Non-Slamming. No external devices / attachments required.

Water Hammer almost non-existent.

Long life and trouble-free operation.

Non Check Valve Drawing

If you require other sizes and valve design standards, please send email to angela@tjfmcn.com to get the drawing.

Please feel free to contact with us at angela@tjfmcn.com or filling up an enquiry form instructed at the bottom.

You will get an effective response within 24 hours from TongJiang Team.

COMPANY PROFILE

floa

1. Our Factory

30 years experience of valve and pipeline industry.

10 senior technical engineers

20000 m2 production area

More than 100 employees to provide professional service.

As the reliable OEM for famous valve brand companies.

t ball valve

2. Factory Show

TONGJIANG Valve Technology Company was established for 30 years.

There are more than 100 employees which includes 10 professional engineers.

OUR SERVICE float ball valve

Reliable Quality, Competitive Price

Reply your inquiry in 2 hours with professional service.

CONTACT INFORMATION

Miss Angela

Mobile: +86 13588429004(Whatsapp)

Skype: angelazhuo1

E-mail: angela@tjfmcn.com

Tel No: +86 571 86991717

Official Website: www.zjtjvalve.com

TongJiang Holdings Company was established in 1993 and focuses on the research and development of all kinds of medium and low pressure valve and the groove pipe fittings.For this 26 years development, TongJiang Holdings has been the famous and professional valve production manufacture inChina.

In 2012, the company costed more than 5,000,000 USD to build 20000 M2 modern equipment factory in DEQING, HUZHOU, ZHENGJIANG. Company annual sales is more than 500 hundred million USD. Also factory has more than 100 employees, including more than 10 professional and technical personnel.

TongJiang sells the valve and pipe fitting for European, Asia, Middle East, American countries.

TongJiang introduces a full set leading of production equipment, which is from raw materials to processing plant, including the valve forming, groove, product testing and factory sales. All the production process adopts information automation control.

TongJiang Company also strictly concatenates on the quality control. The product is passed the ISO9001 quality system standard certification and national standards.