WCB / Cast Steel Y Strainer Valve With Socket Welded And Butt Welded Connection

Y Type Strainer, WCB, Cast Steel with Socket Welded and Butt Welded

Y Strainer Product Introduction

1. Description

Y Type Strainers are devices used to separate unwanted solid particles from gas, liquid or steam flowing in a pipe. They derive their name from their shape. The Y-type strainer is commonly applied in pressurized fluid lines as well as in vacuums and suction conditions. It is used where small solid particles are expected within the fluid and there is a less frequent clean out. They make use of a filtering element which is basically a perforated wire mesh. In instances where the material to be cleaned out from the flow is small hence long duration before screen cleaning, the line is shut down and the strainer cap removed to allow for manual cleaning of the strainer screen. In applications with high dirt density, a blowing system is fitted so that the screen can be cleaned without the need to remove it from the strainer.

Socket Welded and Butt Welded Y Type Strainer

Socket and Butt welded type are suitable for high presure pipeline.

Filtration area is 3 times larger than the inlet area, therefore the pressure loses slightly.

As the mesh area is wide, you can choose double-decked mesh microns.

The body and filtration net can be made according to customer’s demand.

2. Features

Socket Welded and Butt Welded Y Type Strainer Performance Parameters

3. Y Strainer Outsize Drawing

ST-60 DN20-50 S.W. External Dimensions (mm)

ST-61 DN65-200 B.W. External Dimensions(mm)

If you require other sizes and valve design standards, please send email to angela@tjfmcn.com to get the drawing.

Please feel free to contact with us at angela@tjfmcn.com or filling up an enquiry form instructed at the bottom.

You will get an effective response within 24 hours from TongJiang Team.

CONTACT INFORMATION

Miss Angela

Mobile: +86 13588429004(Whatsapp)

Skype: angelazhuo1

E-mail: angela@tjfmcn.com

Tel No: +86 571 86991717

Official Website: www.zjtjvalve.com

TongJiang Holdings Company was established in 1993 and focuses on the research and development of all kinds of medium and low pressure valve and the groove pipe fittings.For this 26 years development, TongJiang Holdings has been the famous and professional valve production manufacture inChina.

In 2012, the company costed more than 5,000,000 USD to build 20000 M2 modern equipment factory in DEQING, HUZHOU, ZHENGJIANG. Company annual sales is more than 500 hundred million USD. Also factory has more than 100 employees, including more than 10 professional and technical personnel.

TongJiang sells the valve and pipe fitting for European, Asia, Middle East, American countries.

TongJiang introduces a full set leading of production equipment, which is from raw materials to processing plant, including the valve forming, groove, product testing and factory sales. All the production process adopts information automation control.

TongJiang Company also strictly concatenates on the quality control. The product is passed the ISO9001 quality system standard certification and national standards.