Anti Static Plastic Climbing Wall Panels For Toddler 6CBM Volume

Some safety issues that amusement equipment must pay attention to

The installation of indoor children's play equipment is directly related to the child's play experience and personal safety. If the amusement equipment is not properly installed or installed poorly, it is easy to have such a failure, which will not only hurt the children's interest in play, but also threaten the child's personal safety.

Not only that, if the indoor children's playground equipment is not properly installed, then the installed objects will be greatly different from the design drawings, and the renderings will not be displayed optimally. . Therefore, in the installation of indoor children's playground equipment, we must not be careless, perfunctory, and must be strictly controlled. What are the precautions for indoor children's playground equipment when installing?

1. It is necessary to install in strict accordance with the design drawings, and also be flexible according to the actual situation.

Indoor children's parks are custom-made products, and all play equipment is produced and installed according to the design renderings. How to place the amusement equipment, how much space between the various amusement equipments, etc., are fixed on the design. Therefore, if the design drawings are correct, the installation of the amusement equipment needs to be carried out in strict accordance with the design drawings. However, we need to pay attention to the fact that the designer is not likely to be all-inclusive when designing, and there may be some negligence in some aspects. At this time, the installer should be flexible and make reasonable changes according to the actual situation of the site.

2. It is necessary to ensure local firmness and ensure the integrity of the whole.

In the installation process of the indoor children's playground equipment, we must ensure that all the amusement equipment can operate normally, and at the same time, pay attention to the overall safety and firmness. When installing, the screws and other fasteners must be tightened. The joint between the two amusement equipments should be fastened. The brackets constructed of galvanized steel pipes must also be fixed. After installation, you can double check to see if there are any omissions. The best way is to experience all the amusement equipment one by one and find that the weak places are repaired in time.

3. Make sure there are no hard objects exposed.

The child's self-protection awareness is very weak, and the skin is extremely delicate. One accidentally squats, touches or scratches the skin. Therefore, at the time of installation, for the harder or sharper part of the amusement equipment, it must be wrapped with a tube to prevent the child from being injured.

4. Avoid too wide gaps.

During the installation of the indoor children's playground, between the two amusement equipment, between the amusement equipment and the wall, between the amusement equipment and the bracket, there will inevitably be gaps in these successive places. If the gap is too large, the child will easily fall into the gap and get stuck during the play. Therefore, be sure to avoid too wide gaps.

05, the slope of the amusement equipment should not be too large.

There will be a certain slope between the amusement equipment such as the rainbow ladder, slides and climbing frames and the ground. For the safety of children's play, these slopes are not too big, and the safety of children's play should be fully considered.

06, the installation of the protective net.

The protective net is an indispensable safety barrier in indoor children's parks. Platforms of the second floor and above, the side of the devil slide, the circumference of the trampoline, etc., all need to install a protective net. Therefore, it must not be missed during the installation process, and at the same time, it must be ensured to be robust and safe.

In addition to the above, the inspection work after installation is equally important. We should check the indoor children's playground as a whole and check that all the amusement equipments are properly installed. Check that all the amusement equipments are safe and secure, and check whether there are any sharp objects left in the field.


After several days of continuous operation, the amusement facilities in the indoor children's playground will have different degrees of wear and tear, and even some amusement equipment will have various failures and stop running. At this time, we need to carry out maintenance and repair on the amusement equipment. During the maintenance of amusement equipment, people often encounter damage or equipment damage caused by improper operation. In order to avoid such things happening, what do we need to pay attention to in the operation?

1. When repairing equipment circuit electrical appliances and transmission equipment

Before the maintenance, the power must be cut off, the power switch should be locked with the safety lock to carry the key, the safety warning sign should be hung, and the safety measures such as the guardian can be implemented before starting the operation. Especially for transmission systems and circuits, live working is strictly prohibited. Resolutely do not take power to repair the transmission equipment, displacement will occur under the action of external force, must be fixed and manned before maintenance; operation of grinding, cutting type of moving equipment and maintenance transmission equipment, it is forbidden to wear gloves;

2, electrician work

When it is necessary to measure or repair the electricity, dry insulating protective equipment should be worn. Personnel should be guarded and coordinated with each other. All electrical wiring should be regarded as a charged body. After confirming that the power has been cut off and the safety warning sign has been hanged by using an electric pen or a multimeter, if the electric shock is encountered, the electric shock should not be directly pulled by hand. Quickly cut off the power; if the electric shock is in a coma, you should immediately call it manually or send it to the hospital for rescue;

3. Welding work

Wear special protective safety protective equipment such as welder gloves, shoes and hats, masks, etc., and do personal safety protection measures; clean the surrounding flammable and explosive materials and debris to prevent fires, and clean the tanks first. Oil and flammable materials and keep the container ventilated to prevent heat explosion; the welding wire is not allowed to wrap around the body or on the shoulder during operation. Prevent the danger from getting out of the way; after finishing the work, you must wait for the metal to be cooled to cool, and make sure that there is no fire at the scene to leave;

4. When repairing pneumatic equipment components such as air pipes, cylinders, air control disc valves, pneumatic rods, etc., be sure to close the air circuit switch first, and exhaust gas to eliminate pressure before operating, to prevent high pressure gas from injuring people;

5. When installing heavy-duty components for lifting large and medium-sized equipment, you must first determine the weight, and then check the lifting tools such as cranes, hoists, and chain ropes to confirm that they are safe and secure; clean up the surrounding equipment and debris, leaving enough At the same time, the working space was hoisted at the scene to prevent the idlers from entering the dangerous area.

These are just some of the safety issues concerning children's playground equipment. There are more details that need to be operated by the venue operators based on actual experience. I hope everyone can remember the safety first, remember their responsibilities, turn the venue and manage them carefully.

Wenzhou Kidsplayplay Toy Co., Ltd. (www.tqplayground.com) is located in Linhai, Taizhou, an excellent tourist city in China. The company covers an area of ​​more than 20,000 square meters. It started from a mold company ten years ago and developed into more than 100 employees. Name, including a group of high-quality technology and management talents with years of experience in rotomolding molds, is a rotomolding mold and children's play equipment company integrating design, development, production and sales.

In May 2011, the company cooperated deeply with Zhejiang Yingbo Amusement Equipment Co., Ltd., and merged with Zhejiang Tianqi Rotational Mould Co., Ltd. in March 2017, unified management, unified management, and achieved substantial breakthroughs in the indoor naughty castle field. Amusement equipment that meets the German EN1176 standard is dedicated to children around the world. Adhering to the goal of “going to the world and rolling the world”, the company is committed to expanding overseas markets. The company's English website www.tanqplay.com, March 2012, with the company's continuous improvement in the Southeast Asian market, Tianqi Amusement Thailand branch TQ (Thailand) Co., Ltd (website: th.kaidiplay.com) and Malaysia Company TANQ EQUIPMENT SDN BHD (website: www.my.kaidiplay.com), and Mexico branch TQ PLAYGOUND CO., LTD. (website: www.tqplay.com), Russian branch Kidsplay Toy Co.. (website: www .ru.kaidiplay.com) has been established one after another, opening a new page on the road to the world and rolling the world.

Management policy: The company adheres to the concept of 'all for the safety of children, all for the health of children, all for the development of children' concept. We have consistently provided our customers with products with high safety performance, strong entertainment interest, strong structural design reliability, elegant appearance and international standards. Establish a customer-centric service concept to protect the interests of customers from the root and the source.

Main products: rotomolding molds, outdoor large-scale amusement equipment, indoor naughty castles, outdoor combination slides and plastic accessories. Suitable for large shopping malls, supermarkets, communities, kindergartens, parks and other play areas. The company has its own design team, which can develop molds according to customer requirements or design products according to the actual site of customers, and produce products of different specifications to meet customer needs.

Product features: more than ten years of rotational molding mold industry experience and independent research and development of large plastic rotary molding equipment, with 7 independent arm, four-station full-scale rotary forming rotomolding machine, in the structure to ensure that rotomolding products are not easy to fall off, no damage In the surface treatment, the pores and trachoma are eliminated, and the wall thickness of the product is uniform and reliable. The plastic is made of South Korean imported LLDPE plastic powder, which is in line with the international environmentally friendly edible grade. The iron parts are made of hot-dip galvanized pipe and spray-coated. The complete set of products is more resistant to use than traditional FRP and blow molded products. It has a longer service life in outdoor high and low temperature and various complicated environments, and is resistant to abrasion and weathering and is not easy to fade.

In addition, the design team is a strong guarantee for the development of our company. In the design of molds and accessories, we strictly follow the EN1176 standard and ensure the safety of the products from the source. The design of the complete set of products is based on the outstanding overall effect, and the reasonable and safe frame structure wins the praise of the customers.

Tianqi Rotomolding follows the tenet of “all responsible for customers”, continuously improves the quality of its personnel and product advantages, continuously improves and builds lean products, and passes third-party certifications such as CE, ISO, TUV GS EN1176, SGS factory certification, and better. Serve the customers and create a bright future for the company's strategic goal of “going to the world and rolling the world”.