Durable Fun Kids Outdoor Playground Equipment Easy To Install Bright Colors

Galvanized steel pipe easy to install durable material outdoor playground with bright colors TQ-CB1293

As we all know, the operational financing in the planning and design stage directly affects the quality of product service and the experience of visitors after the opening of the theme park. In the demand for financing of many professional operating conditions, the demand for special operating conditions in the queuing area of ​​amusement equipment is particularly important. We have learned that whether it is engaged in the operation of the park or as a tourist to visit the park, it is easy to find in the playground. The amusement equipment queues the most visitors, everyone queues in each equipment area to play equipment. . Even some large roller coasters, for a three- or five-minute experience, have to queue for two or three hours. Especially in the tourist season, most of the time spent playing in the queue.
Therefore, the design of the queuing area is not good, and it is unreasonable. The operating conditions need not be funded, which directly affects 80% of the experience of more than 90% of tourists coming to the park. Then, what kind of operational demand conditions should be considered in the queuing area of ​​a theme park's amusement equipment, and how should we design a queued product with high quality of operational services? We have studied and compared the queuing areas of many well-known parks at home and abroad, and summarized 30 operating conditions.
1. Passenger flow statistics
It is used to count the reception volume of each device. The common methods are divided into gate statistics and monitoring statistics. Generally set at the entrance and exit of the queuing area. Consider the design of strong and weak power in advance.
2, the passenger channel
That is to say, the basic queue line of the tourists, the queuing passage leading to the amusement equipment and the passages of the tourists who have experienced the equipment and walked out of the equipment area.
3, alternate channel
Also known as the peak day channel or the alternate channel, that is, the channel that is enabled when the peak day visitors are many, exceeding the normal reception volume of the passenger area.
4, fast channel
It can also be used as a VIP channel or a fee-based service channel to reach the access zone of the equipment on the shortest distance.
5, barrier-free access
A wheelchair access that is available for disabled people.
6, employee channel
That is, the channel designed for the employees to enter and exit the queuing area and the equipment area along the queuing area. It is used to deal with emergency events and sanitation in queuing areas. Can be used with the fast channel, provided that the two channels are adjacent.
7, alternate channel
Also known as the peak day channel or the alternate channel, that is, the channel that is enabled when the peak day visitors are many, exceeding the normal reception volume of the passenger area.
8, evacuation channel
It is also called the emergency channel, that is, the channel that can be quickly evacuated when the emergency exit is opened in the queuing area, and can be used together with the employee channel or the fast channel, provided that these channels are adjacent.
9, monitoring points
It is necessary to fully monitor the coverage of the equipment queuing area.
10. Emergency exit
We have learned that an emergency exit should be set every 20-30 meters, which is convenient for tourists to evacuate from the queuing area to a safe place in the event of an emergency, or to change the idea to leave the queuing area.
11, adjustment port
Also known as the interval point, when responding to different passenger flows, adjust the position of the moving line in the queuing area. Usually a chain or gate type.
12, trash can point
Generally, the queuing area exceeding 50 meters should consider placing the trash can in the queuing area. The placement point should be determined in advance, and the corresponding queuing area should reserve space, that is, control the construction length of the queuing area. Can not affect the passage of tourists.
13, water supply and drainage points
Landscape design tends to neglect the need for cleaning and rinsing in the outdoor park queuing area. Therefore, when there is insufficient greening water point around the long queue area of ​​large equipment, the water supply point should be reserved near the queuing area.
14, TV point
In general, the large-scale amusement equipment queuing area should consider installing a TV set, which is used to broadcast the park's promotional videos, equipment safety instructions, and programs for playing the relief of tourists' long queues of irritability, as well as installing some body games, such as cutting fruits and racing cars. Inductive games, looping out.
15, broadcast point
The China Amusement Equipment Information Network Information Network reminds you that the broadcast console must be in the operation room to facilitate the manipulation of the content. The broadcast should cover the range of the passenger and passenger channels, and the broadcast of the passenger and passenger channels should be controlled separately.
16, lighting and emergency light points
Large-scale parks should be open to the evening for a certain period of time, so it is necessary to consider the setting of the location of emergency evacuation lights after night operation lights and power outages.
17, the foggy system point
The point used for the installation of erupting water mist equipment is also used for the summer high temperature cooling effect of the queuing area tourists.
18, information release point
For example, the electronic display screen of the large equipment queuing area entrance, the waiting time in the queuing area is reported to the screen point.
19. Shade and non-shade areas
Shading is divided into indoor or semi-indoor queuing areas with buildings and areas with awnings.
20, temporary seat
It is arranged for the temporary rest of tourists in the middle of the long queue area. There are fixed platform type and automatic folding type.
21, halfway back to the point
For a large equipment queuing area with a length of one hundred meters, the return point is usually set in the middle to the down passenger channel. Therefore, to install a one-way gate at this point, it can only enter and prevent the tourists from entering the queue.
22, safety railings
China Amusement Equipment Information Network learned that the fast track is temporarily opposite to the regular passenger channel, and the railing of the connecting part between the two channels is higher than the railing of the queuing area. Under normal circumstances, the height of the railing in the queuing area is 1000mm, then the height of the safety railing is 1100mm.
23, skid plate
For the indoor play equipment queuing area, a skid plate is usually installed at the entrance.
24, safety net area
That is to say, the large-scale equipment running line passes through the upper area of ​​the queuing area, and the safety net is designed to prevent the falling objects from falling into the queuing area.
25, railing profiles
Most of the railings in the country are stainless steel, galvanized pipes or iron railings. Regardless of the material, it is recommended to use a round material. It is not recommended as a square tube. Because of the angularity, it is very easy to hurt tourists if it is bumped.
26. Shelter area
That is, the maternal and child area or the child area, because the equipment ride is limited. When you are away from home, this area is convenient for visitors who are not waiting for equipment.
27, railing style
The state stipulates that the safety railings around the equipment area must be vertical poles. It is also recommended that the railings in the queuing area be the same, which can effectively prevent tourists from going up and down.
28, the queuing area identification point
The layout of the entrance and exit signs and safety warning signs and the emergency evacuation signs should be set off against the theme culture of the equipment.
29, selling points
In the middle of some large amusement equipment queuing areas, it is sometimes necessary to consider setting up small-sized trucks to facilitate tourists to purchase water, food and specialty goods.
30. Interactive area
Long queues for large equipment can take into account the settings of the interactive space or interactive stage. Used in interactive performances such as clowns to ease the irritability of long queues.
In short, we remind you that only by operating the financing and planning and design, it is a good product to design a product that meets the operational needs.

Wenzhou Kidsplayplay Toy Co., Ltd. (www.tqplayground.com) is located in Linhai, Taizhou, an excellent tourist city in China. The company covers an area of ​​more than 20,000 square meters. It started from a mold company ten years ago and developed into more than 100 employees. Name, including a group of high-quality technology and management talents with years of experience in rotomolding molds, is a rotomolding mold and children's play equipment company integrating design, development, production and sales.

In May 2011, the company cooperated deeply with Zhejiang Yingbo Amusement Equipment Co., Ltd., and merged with Zhejiang Tianqi Rotational Mould Co., Ltd. in March 2017, unified management, unified management, and achieved substantial breakthroughs in the indoor naughty castle field. Amusement equipment that meets the German EN1176 standard is dedicated to children around the world. Adhering to the goal of “going to the world and rolling the world”, the company is committed to expanding overseas markets. The company's English website www.tanqplay.com, March 2012, with the company's continuous improvement in the Southeast Asian market, Tianqi Amusement Thailand branch TQ (Thailand) Co., Ltd (website: th.kaidiplay.com) and Malaysia Company TANQ EQUIPMENT SDN BHD (website: www.my.kaidiplay.com), and Mexico branch TQ PLAYGOUND CO., LTD. (website: www.tqplay.com), Russian branch Kidsplay Toy Co.. (website: www .ru.kaidiplay.com) has been established one after another, opening a new page on the road to the world and rolling the world.

Management policy: The company adheres to the concept of 'all for the safety of children, all for the health of children, all for the development of children' concept. We have consistently provided our customers with products with high safety performance, strong entertainment interest, strong structural design reliability, elegant appearance and international standards. Establish a customer-centric service concept to protect the interests of customers from the root and the source.

Main products: rotomolding molds, outdoor large-scale amusement equipment, indoor naughty castles, outdoor combination slides and plastic accessories. Suitable for large shopping malls, supermarkets, communities, kindergartens, parks and other play areas. The company has its own design team, which can develop molds according to customer requirements or design products according to the actual site of customers, and produce products of different specifications to meet customer needs.

Product features: more than ten years of rotational molding mold industry experience and independent research and development of large plastic rotary molding equipment, with 7 independent arm, four-station full-scale rotary forming rotomolding machine, in the structure to ensure that rotomolding products are not easy to fall off, no damage In the surface treatment, the pores and trachoma are eliminated, and the wall thickness of the product is uniform and reliable. The plastic is made of South Korean imported LLDPE plastic powder, which is in line with the international environmentally friendly edible grade. The iron parts are made of hot-dip galvanized pipe and spray-coated. The complete set of products is more resistant to use than traditional FRP and blow molded products. It has a longer service life in outdoor high and low temperature and various complicated environments, and is resistant to abrasion and weathering and is not easy to fade.

In addition, the design team is a strong guarantee for the development of our company. In the design of molds and accessories, we strictly follow the EN1176 standard and ensure the safety of the products from the source. The design of the complete set of products is based on the outstanding overall effect, and the reasonable and safe frame structure wins the praise of the customers.

Tianqi Rotomolding follows the tenet of “all responsible for customers”, continuously improves the quality of its personnel and product advantages, continuously improves and builds lean products, and passes third-party certifications such as CE, ISO, TUV GS EN1176, SGS factory certification, and better. Serve the customers and create a bright future for the company's strategic goal of “going to the world and rolling the world”.