High Speed Plastic Bottle Blow Molding Machine MP70D-2 For Medical Bottle
Brand Name:MEPER
Certification:CE/ISO9001:2008
Model Number:MP70D-2
Minimum Order Quantity:1 set
Delivery Time:25-35 work days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Ningbo Zhejiang China
Address:
Zhutian, Xiaogang, Beilun, Ningbo, China
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
High Speed Plastic Bottle Blow Molding Machine MP70D-2 For Plastic Medical Bottle
Introduction:
MP70D is specifically designed for making bottles from 50ml up to maximum 5L. It is hydraulic driven with accrate eletrical control system. MP70D has double stations to increase the production efficiency. Also, it has variety of choice of die heads. With more than 10 years of success in the market, MP70D is updated to be one of the most reliable and popular model in the world.
Features
a) Extruding device adopts variable frequency motor which can satisfy the requirements of rotation change of screw during blowing process. Screw with big slenderness ratio can be used to process many kinds of materials and has strong plasticizing ability, high production and low energy consumption. The barrel adopts resistance heater which is controlled by computer and heats quickly ,stably and equably.
b) By installing different head in combined extrusion system between two extrusion machines, they can blow products with view strip line or double layers.
| MP70D Double station blow molder with horizontal linear mould shuttle | ||||
| Length: | 3600mm | |||
| Width: | 2200mm | |||
| Height | 2360mm | |||
| Key Data | MP70D | |||
| mm | ||||
| Linear mould stroke | A | 450 | ||
| Mould Width | B | 430 | ||
| Mould Length | C | 350 | ||
| Mould Thickness | D | 190 | ||
| Opening Stroke | E | 290 | ||
| Platen daylight | D+E | 480 | ||
| Clamping Force | 75kN | |||
| Dry Cycle | 7 sec. | |||
| Centre Distance | 2x2 fold | 160 | ||
| 2x3 fold | 120 | |||
| 2x4 fold | 100 | |||
| 2x6 fold | 60 | |||
| Extruder | φ70 | φ75 | φ80 | |
| Screw Speed | r/min | 0~65 | 0~65 | 0~65 |
| Screw Diameter | mm | 70 | 75 | 80 |
| Screw L/D Ratio | L/D | 24 | 24 | 24 |
| Energy Requirements | ||||
| Extruder Inverter Power | kW | 18.5 | 22 | 30 |
| Extruder Moter Power | kW | 18.5 | 22 | 30 |
| Srew Heating Power | kW | 12.7 | 14.4 | 15.85 |
| Fan Power | kW | 0.14X2 | 0.14X2 | 0.14X2 |
| Oil pump Motor Power | kW | 9.5 | 9.5 | 9.5 |
| Total Power of Machine | kW | 49.14 | 54.34 | 63.79 |
| Air Requirement approx | m3/min | 1.2 | 1.2 | 1.2 |
| Air Working Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Cooling Requirements | ||||
| Consumption Cooling Water | L/min | 40 | 40 | 40 |
Standard Features:
Auto Lubrication
Water Cooled Modular Blow Pin
Hot Wire Cutting
Positioning Hole For Quick Mold Change
Adjustable Die head
Linear Transducer
FRL(Filter Regulator Lubricator) for Pneumatic
Proportional Hydraulic System fro better control
Swing and Adjustable Extrusion Platform
Installation of mould
Before installing mould, all required tools and lift should be prepared. During installing mould, the following procedure should be followed:
1) Select Manual mode for machine and try to open and close mould several times.
2) Open and move plate to position which allows mould to enter. Use lift to deliver two connected half moulds then connect them with front mould plate by using bolts.
3) Adjust mould level degree and height roughly. Then use bolt to lock front half mould with front mould plate slightly.
4) Joint plate joint and mould slightly with low pressure and low speed. Then use bolt to lock second half mould with middle mould plate slightly.
High Speed Plastic Bottle Blow Molding Machine MP70D-2 For Medical Bottle
Inquiry Cart
0