Construction Stainless Steel Panels , Stainless Steel Sheet Roll Continuous Casting Slab Material
Brand Name:SINOY
Certification:SGS, TUV, ISO
Model Number:316
Minimum Order Quantity:1 Tons
Delivery Time:3-5 working days
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
Nongshi Road,#07,Dongbei Tang District,Xi Shan,Wuxi,Jiangsu,CN,Zip:214000
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
Good Quality Hot Rolled 316 Finish Stainless Steel Plate
Hot-Rolled Stainless Steel Plate:
Continuous casting slab or slab slab is used as raw material,
heated by step heating furnace, dewatered by high pressure water
and then into rough rolling mill.
The rough rolling material passes through the cutting head and tail
and then enters the finishing mill to carry out computer controlled
rolling. After the final
rolling, it is subjected to laminar cooling (computer controlled
cooling rate) and coiler winding, which becomes a straight hair
roll. The head and tail of the straight hair roll are often in the
shape of a tongue and a fishtail. The thickness and width are
poorly accurate, and the side has frequent defects such as a wave
shape, a folded edge, and a tower shape. The weight of the coil is
heavier and the inner diameter of the coil is 760 mm.
| Hot rolled plate | |||||||
|---|---|---|---|---|---|---|---|
| Specification (Thick) | Big Deviation | Normal Deviation | Small Deviation | No Deviation | |||
| 3.0mm | 2.6mm-2.75mm | 2.75mm-2.85mm | 2.86mm-2.9mm | no less than 2.9mm | |||
| 4.0mm | 3.5mm-3.6mm | 3.6mm-3.75mm | 3.76mm-3.95mm | no less than 3.95mm | |||
| 5.0mm | 4.5mm-4.6mm | 4.6mm-4.75mm | 4.75mm-4.95mm | no less than 4.95mm | |||
| 6.0mm | 5.4mm-5.6mm | 5.6mm-5.75mm | 5.75mm-5.85mm | no less than 5.85mm | |||
| 8.0mm | 7.3mm-7.5mm | 7.5mm-7.65mm | 7.65mm-7.85mm | no less than 7.85mm | |||
| 10.0mm | 9.2mm-9.3mm | 9.3mm-9.6mm | 9.6mm-9.85mm | no less than 9.85mm | |||
| 12.0mm | 11.1mm-11.2mm | 11.2mm-11.6mm | 11.6mm-11.85mm | no less than 11.85mm | |||
| 14.0mm | 13.1mm-13.2mm | 13.2mm-13.6mm | 13.6mm-13.85mm | no less than 13.85mm | |||
316 stainless steel sheet
Corrosion Resistance :
Grade 316 has good resistance to a wide variety of corrosive enviornments, including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 316. Stress corrosion cracking resistance of Grade 316 is very high, as it is for all ferritic grades.
| 316 Chemical composition: | ||||||
| C | Si | Mn | Cr | Ni | S | P |
| 0.08 | ≤1.0 | ≤2.0 | 16.0~18.0 | 10.0~14.0 | ≤0.03 | ≤0.045 |
| mechanical properties: | ||||||
| Tensile strength σb (MPa) | Conditions yield strength 0.2 sigma (MPa) | Elongation % (min) | Hardness | |||
| 520 | 205 | 40 | ≤187HB ≤90HRB ≤200HV | |||
Data of Other Grades Chemical Composition :
| Typical chemical composition | ||||
| % | 304 | 304L | 310S | 316L |
| C | 0-0.07 | 0-0.03 | 0.25 | 0.03 |
| Mn | 0-2.0 | 0-2.0 | 2.00 | 2 |
| Si | 0-1 | 0-1 | 1.50 | 0.75 |
| P | 0-0.05 | 0-0.05 | 0.045 | 0.045 |
| S | 0-0.02 | 0-0.02 | 0.03 | 0.03 |
| Cr | 17.5-19.5 | 17.5-19.5 | 24.0-26.0 | 16.0-18.0 |
| Ni | 8-10.5 | 8-10.5 | 19.2-22.0 | 10.0-14.0 |
| Mo | 0.75 | 2.00-3.00 | ||
| N | 0.1 | |||
| Cu | 0.50 | |||
| Fe | Balance | Balance | Balance | |
Applications
Typical applications for 430 grade include:
Linings for dish washers
Refrigerator cabinet panels
Automotive trim
Lashing Wire
Element Supports
Stove trim rings
Fasteners
Chimney Liners
Factory and Machinery Equipment :
We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
Packing
Cold Rolled waterproof paper and steel strip reinforcement,one package about 2 tons,Load in 20GP / 40GP
WHY US?
Q1. How do you control quality ?
A1: Mill Test Certification is supplied with shipment, Third Party
Inspection is available.
Q2. What are the advantages of your company ?
A2: We have many professionals, technical personnel, more
competitive prices and best after-dales service than other
stainless steel companies.
Q3. How many coutries you already exported ?
A3: Exported to more than 50 countries mainly from America , Russia
, UK , Kuwait, Egypt ,Brazil , UAE , Germany , Dubai , Saudi Arabia
, Iran , Turkey , Jordan , Malaysia , Singapore , etc.
Q4. Can you provide sample ?
A4: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days
Construction Stainless Steel Panels , Stainless Steel Sheet Roll Continuous Casting Slab Material
Inquiry Cart
0