Hot Rolled 430 No.1 Finish Stainless Steel Plate Building
Hot-Rolled Stainless Steel Plate:
Continuous casting slab or slab slab is used as raw material,
heated by step heating furnace, dewatered by high pressure water
and then into rough rolling mill.
The rough rolling material passes through the cutting head and tail
and then enters the finishing mill to carry out computer controlled
rolling. After the final
rolling, it is subjected to laminar cooling (computer controlled
cooling rate) and coiler winding, which becomes a straight hair
roll. The head and tail of the straight hair roll are often in the
shape of a tongue and a fishtail. The thickness and width are
poorly accurate, and the side has frequent defects such as a wave
shape, a folded edge, and a tower shape. The weight of the coil is
heavier and the inner diameter of the coil is 760 mm.
|Hot rolled plate|
|Big Deviation||Normal Deviation||Small Deviation||No Deviation|
|3.0mm||2.6mm-2.75mm||2.75mm-2.85mm||2.86mm-2.9mm||no less than 2.9mm|
|4.0mm||3.5mm-3.6mm||3.6mm-3.75mm||3.76mm-3.95mm||no less than 3.95mm|
|5.0mm||4.5mm-4.6mm||4.6mm-4.75mm||4.75mm-4.95mm||no less than 4.95mm|
|6.0mm||5.4mm-5.6mm||5.6mm-5.75mm||5.75mm-5.85mm||no less than 5.85mm|
|8.0mm||7.3mm-7.5mm||7.5mm-7.65mm||7.65mm-7.85mm||no less than 7.85mm|
|10.0mm||9.2mm-9.3mm||9.3mm-9.6mm||9.6mm-9.85mm||no less than 9.85mm|
|12.0mm||11.1mm-11.2mm||11.2mm-11.6mm||11.6mm-11.85mm||no less than 11.85mm|
|14.0mm||13.1mm-13.2mm||13.2mm-13.6mm||13.6mm-13.85mm||no less than 13.85mm|
430 stainless steel sheet
Corrosion Resistance :
Grade 430 has good resistance to a wide variety of corrosive
enviornments, including nitric acid and some organic acids. It
attains its maximum corrosion resistance when in the highly
polished or buffed condition. In general its resistance to pitting
and crevice corrosion resistance is close to that of grade 304.
Stress corrosion cracking resistance of Grade 430 is very high, as
it is for all ferritic grades.
Heat Resistance :
Grade 430 resists oxidation in intermittent service up to 870°C and
to 815°C in continuous service. This grade may become brittle at
room temperature after prolonged heating in the 400-600°C range.
This effect can be eliminated by annealing.
|430 stainless steel chemical composition|
|430 physical properties|
|Tensile Strength:||σb (MPa)≥450|
|Yield strength :||σ0.2 (MPa)≥205|
Typical applications for 430 grade include:
Linings for dish washers
Refrigerator cabinet panels
Stove trim rings
Factory and Machinery Equipment :
We had our own factory to do slitting re-rolling and finish
treatment machine,PVC and interleaving paper we will using with our
machine for you,could protect stainless steel surface from damage
or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
Cold Rolled waterproof paper and steel strip reinforcement,one
package about 2 tons,Load in 20GP / 40GP
Q1. How do you control quality ?
A1: Mill Test Certification is supplied with shipment, Third Party
Inspection is available.
Q2. What are the advantages of your company ?
A2: We have many professionals, technical personnel, more
competitive prices and best after-dales service than other
stainless steel companies.
Q3. How many coutries you already exported ?
A3: Exported to more than 50 countries mainly from America , Russia
, UK , Kuwait, Egypt ,Brazil , UAE , Germany , Dubai , Saudi Arabia
, Iran , Turkey , Jordan , Malaysia , Singapore , etc.
Q4. Can you provide sample ?
A4: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days