Commercial Ultrasonic Denture Instrument Cleaner 60W With
Overheating Protection
Applications:
Jewelry: Necklace, Rings, Earrings, Bracelets, etc.
Glasses and Timepieces: Eyeglasses. Watch chains, Waterproof
watches, etc.
Commodities: Shaver heads, Razor blades, Dentures, Combs,
Toothbrushes, etc.
Metal Articles/Dishware: Watch parts, Ancient coins, Spoons, Forks,
etc.
Stationery: Pen-heads, Printer-heads, Inkjet cartridges, Seals, bay
toys, etc.
Gift: Perfect gift.
Specifications:
Model No. | VGT-6250 |
Frequency | 40 kHz |
Tank Material | Stainless Steel SUS304 |
Capacity | 2500ml |
Timer Range | 5 cycles: 180s-280s-380s-480s-90s |
Voltage | AC100-120V, 60Hz;AC220-240V, 50Hz |
Ultrasonic Power | 65W |
Tank Size (L*W*H) | 245*155*80mm |
Overall Size (L*W*H) | 305*235*215mm |
N.W. (1 unit) | 2.50 kgs |
G.W. (1 unit) | 2.95 kgs |
Features:
1. Friendly digital control with 3-colors ( blue, red, green ) LED
display.
2. Digital control, 5 timer settings(90s-180s-280s-380s-480s).
3. Heating temperature: 60℃.
4. Overheating protection function.
5. With degas, function for improves enhance cleaning.
6. Build-in cool fan to steady and safe working.
7. Large capacity tank for professional cleaning.
Packing Details:
Gift-box size(L×W×H) | 340*273*252mm |
Carton size(L×W×H) | 560*355*529mm |
Qty/CTN | 4pcs/CTN |
20’ container | 1000pcs |
40’ container | 2060pcs
|
Ultrasonic cleaner principle:
Ultrasonic cleaning is based on the cavitation effect caused by the
high-frequency Ultrasonic wave vibration signal in the fluid.
Microscopic bubbles are formed, and they implode violently causing
the cavitation which creates an intense scrubbing action on the
surface of the item being cleaned. The bubbles are small enough to
penetrate microscopic crevices, cleaning them thoroughly and
consistently.
Ultrasonic cleaning is extremely effective at removing dirt and
grime which would normally require tedious manual cleaning by hand.
It has been used to clean a wide variety of instruments and
mechanical parts such as carburetors, returning them to almost
“like new” condition without damage to delicate parts.
How can we ensure product quality?
1.R&D PROCESS: Marketing research.
Determine product features,details and perform industrial design.
Structural design.
Structural and manufacturability review.
Lid open/close durability test.
Cleaning effect test.
Durability test with 5000 working cycles
2.Laboratory test: Salt spray test.
High/Low-temperature tests, dry/wet tests.
Drop test.
Push-button durability test.
3.OQC, IQC, IPQC, QC, QC of PCB Department.
4. Support the third party to inspect goods.
5. Double-check before transportation.
Products details: