Electric Disc Stack Separator Crude Oil Refinery Plant Soybean 7.5kw Power

Electric Disc Stack Separator Crude Oil Refinery Plant Soybean 7.5kw Power

Introduction:

Zydh can separate rapid succession of solid liquid and liquid liquid ,which is a kind of vertical centrifuge. A rotary drum is install in the upper

end of vertical shaft, the driving device driven by a motor to rotate at high speed. Drum have a set of a butterfly shaped parts mutually

overlapped together. Have a very small space left between the disc and disc. Suspension pour into drum by feeding tube which is located center

of the drum.When the slurry flows past the clearance between the disc, solid particles in centrifuge sinking to the sediment is formed on the disc.

Sediment falls of the disc along the sliding surface of the disc and accumulate in the drum at the largest diameter. The separation of the

liquid exhaust drum from the liquid outlet .The function of the disc is to short the distance between the settlement of solid particles or liquid

droplets and to expand the area of settlement of the drum.Because the installation disc in the drum and greatly improves the separators’

production capacity.

Feature:

1. High Speed and high separation factor(7200 r/min )

2. running balance

3. simple operation

4. low oil consumption.

5. Automatically discharging

6. continuous operation.

7. All the key parts of the machine bearing all use imported bearing((brand SKF)

8. Drum adopts 0Cr13Ni4Mo material that is steel high purity, good performance.

9. In order to meet different requirements of production scale, the machine adopt bottom washing. Facilitate liquid seal and exclusive soap, the

heart pump discharge the material, reducing system operating pressure. Regulate different specific gravity ring, can be suitable for all kinds of oil,

so that better separation.

Working Principle:

Disc centrifuge the bowl will be driven by the main motor by the friction clutch and screw gear pair to rotate highly around the main shaft. Stock

liquid flows from the center charging inlet on the top to the bottom through the charging pipe. And then passes through disc seats to the bowl's

space. The bigger gravity solid phase particles in the stock liquid is settled down to the bowl's wall by the centrifugal force and then under the

control of the side bowl drained out of the residue outlet but liquid phase is fully settled down to the bowl wall by the centrifugal force field and

then under the control of the side bowl it is drained out of the residue outlet but liquid phase is fully settled down to the center along the discs to

drain out by the centripetal pump.

Techincal Parameters:

Application :

Three phase of plant oil centrifuge:

crude oil refinery plant is the main equipment for a vegetable oil continuous refining system,

which can be used for plant oil refining,continuous degreasing, dephosphorization, de-soap,

dehydration and other procedures.

Reducing the harmful ingredients in vegetable oil, to meet national standards.

For the coconut oil/ soybean oil / palm oil, we have exported to many countries.

Photos: