
Add to Cart
Product Description for 24volt lead acid battery charger ac110v 220v to DC 24v 2a 2.5a 3a 3.5a 4a battery charger
| Specifications | ||
| Input Voltage Range | VAC | 100-240Vac 50/60Hz |
| Inrush Current at 110VAC, 25℃ | A | |
| Input Current(Max) | A | 1.5A(100VAC Input) |
| Power Factor | - | Meets EN61000-3-2 |
| Leakage Current(220VAC 60Hz) | mA | |
| Hold Up Time at 110VAC input, full load | ms | |
| Temperature Coefficient | ℃ | ±0.05%/℃ |
| Voltage Accuracy | % | ±2% |
| Adjustment Range | - | None |
| Min. Load | A | None |
| Total Regulation | - | ±5% |
| Ripple & Noise | mV | 120mV |
| Short Circuit Protection | % | Continuous - hiccup mode |
| Over Voltage Protection | ℃ | 110-150% of nominal (Cycle input power to reset) |
| Efficiency at Average Load | - | 88% min |
| Operation Temperature | - | 0 to +60℃, derating linearly to 50% load above 40℃ |
| Storage Temperature | - | -10 to +85℃ |
| Humidity (non condensing) | - | 10-90% RH |
| Cooling | - | Convection |
| Withstand Voltage | - | Input to Ground 1.5kVAC, Input to Output 3kVAC (Output is connected to Ground) |
| Vibration (non condensing) | - | 23.52m/s2 (10 - 55Hz: constant sweep 1 min X, Y, Z for 1 hour) |
| Shock | - | < 196.1 m/s2 (20G) |
| Safety Agency Certifications | - | UL60950-1, EN609501-1, IEC60950-1, CE Mark |
| DOE Regulation | - | VI |
| Off-Load Power Consumption | mW | <210mV |
| Conducted & Radiated EMI | - | EN55023-B, FCC Class B |
| Immunity | - | EN55024 |
Qty (pcs) | Delivery Time (working days) |
less than 100 | 5-7 |
100-800 | 7-10 |
800-3K | 10-12 |
3K-10K | 15-18 |
10K-20k | 20-22 |
*Data is a reference for buyer, Specification situation will be given to you after asking us. | |
Remark | |
1.Samples (less than 10pcs) can be provied, lead time with 3days. | |
2.Please carefully check all the details before you take a order. | |