Moulded FRP / Grp Water Tank , 0.125m3 - 5000m3 Capacity Fiberglass Water Storage Tanks
Brand Name:ZOKO
Minimum Order Quantity:1 set
Delivery Time:3-8 months
Payment Terms:L/C, T/T
Place of Origin:China
Price:Negotiation
Contact Now
Add to Cart
Active Member
Address:
jiangsu zhonghou chemical engineering technology co.,ltd
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
GRP FRP swimming pool water Flow equalization Flexural Modulus of Elasticity ≥ 5900MPa
Equipment features:
FRP/GRP water tank, panel tanks. It is a new type of tank. It is
made of high qualified panels. Sheet molding compound is a kind of
fiberglass reinforced plastic, which is a mixture of unsaturated
polyester resin with impregnating augmentation material, filling
material and glass fiber. The water tank is nontoxic, durable,
lightweight, corrosion resistant and good-looking. Meanwhile, it's
easy to maintain and long-life. It is widely used in water storage
in residential buildings, schools, hotel.The water tanks are used
both for domestic water as well as medicine and health where needs
good water supply quality.
Sectional Water Tank Specifications
1. Moulded singal board specifications(If need other specifications
we can chatting)
1000x1000mm ,1000x 500mm ,500x 500mm
2. thickness:5mm, 8mm, 10mm ,12mm, 14mm,,16mm ,The thinkness is 5mm
signal board is used for water tank cover plate
3. Moulded water tank is measure up GB5749-85
4. Capacity: 0.125m3 ~ 5000m3
Moulded signal baord specifications
| Tensile strength Mpa | ≥70MPa |
| Bending strength | ≥100 Mpa |
| Barcol hardness | ≥60 |
| Water absorption | ≤ 1.0% |
| Fiber glass content | ≥25% |
| Flexural Modulus of Elasticity | ≥ 5900MPa |
Installation Instructions of the FRP Water Tank
1 Based on the first plane leveling cement, on the same plane so
that the error should not exceed ± 0.5cm.
Welding channel: channel according to the size of the tank welding
good match its size and the tank floor size, channel steel welding
complete, the diagonal measurements, error of ± 0.5cm, and all
welds to connect uniform row seam line.
2 Install the end state: water tank according to the board printed
number and description of the arrangement, the connection of the
tank bottom, while between two boards add sealing tape, bolted ¢
10's. Securely sealed bottom plate, bolt afterburner afterburner to
a uniform, one-time can not be too much force, otherwise due to
uneven force caused by the split plate phenomenon.
3 Is connected with a fixed angle iron and channel steel base
plate, so that the tank housing more firmly fixed on the basis of
the channel.
4 Install states: water tank according to the board printed number
and description to identify the layers BOND NO tank state body, and
previously separate state body assembled with bolts.
5 Install stretch: Stretch inner tank according to the size, number
and find internal reinforcement length. Measuring stretch of wire
reinforcement plate fastening parts, Indian painting, drilling, on
to the wire, tighten to make a flat stretch in balance with the
tank housing. If there is a large error between the casing and
reinforcement, can be adjusted by adjusting the size of the error
bolt tightness, until the error is adjusted to a minimum so far.
6 Install the cover: the final installation of the tank top cover,
and even fastening bolts can not force too large or too small.
After all the fasteners tank adjusted, according to the drawing
hole location, a good all pipes, having a good valve flange for
docking.
7 Tanks fully installed, unified inspection, adjustment, test the
water does not leak in compliance.
How to correctly use the FRP Water Tank ?
1. Fiberglass tanks for the storage of drinking water at room
temperature and the design and manufacture, please do not store hot
water and other liquids (chemicals, oil, etc.)
2. On-site construction: pre-construction, install the stay
requested by the foundation. Providing power and construction
inspection seal with water.
3. To avoid water tank next to the fire: When welding operations,
to take protective measures, not to splash the water tank panels
Mars.
4. To prevent contaminants from flowing into the tank from the
outside: for the convenience and safety of maintenance and
inspection, the tank must leave some space around.
5. The molded fiberglass boards do not touch on the corners, do not
beat something with hard tools.
6. In order to prevent expansion of the pipe, shrinkage, partial
load and shock, glass steel water tank, outlet pipe must be of
rubber around the streets (expansion joints), to take over the
additional weight should be supported, not acting on the tank.
| Tensile strength Mpa | ≥70MPa |
| Bending strength | ≥100 Mpa |
| Barcol hardness | ≥60 |
| Water absorption | ≤ 1.0% |
| Flexural Modulus of Elasticity | ≥ 5900MPa |
Moulded FRP / Grp Water Tank , 0.125m3 - 5000m3 Capacity Fiberglass Water Storage Tanks
Inquiry Cart
0