Ethernet SFP+ Fiber Optic Transceiver Module TX1270nm DFB RX1330nm 10Gbps 20KM BIDI Simplex
Brand Name:OE
Certification:ISO9001
Model Number:SFP+ 10G 1270 BD 20KM
Minimum Order Quantity:Negotiable
Delivery Time:5-8 work days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Wuhan Hubei China
Address:
No. 40 Gaoxinsi road, Donghu high-tech zone, Wuhan, 20 buildings 4003, Gezhouba solar city
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Ethernet SFP+ Fiber Optic Module TX1270nm DFB RX1330nm 10Gbps 20KM BIDI Simplex
Applications
10GBASE-BX
10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.953Gbps
Other Optical Links
PRODUCT FEATURES
1. Up to 10Gbps Data Links
2. Up to 20KM transmission on SMF
3. 1270nm Laser and 1330nm PIN-TIA
4. Metal enclosure, for lower EMI
5. 2-wire interface with integrated Digital Diagnostic monitoring
6. Hot-pluggable SFP+ footprint
7. Specifications compliant with SFF 8472
8. Compliant with SFP+ MSA with LC connector
9. Single 3.3V power supply
10. Case operating temperature range:0°C to 70°C
11. Power dissipation < 1.5W
PRODUCT DESCRIPTION
The SFP+ LR module electrical interface is compliant to SFI
electrical specifications. The transmitter input and receiver
output impedance is 100 Ohms differential. Data lines are
internally AC coupled. The module provides differential termination
and reduce differential to common mode conversion for quality
signal termination and low EMI. SFI typically operates over 200 mm
of improved FR4 material or up to about 150mmof standard FR4 with
one connector.
SFP+10G-LR modules Complaint with IEEE 802.3ae 10GBASE-LR,Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit SFP module “SFP+”,1270nm DFB transmitter, PIN photo-detector,LC connector,2-wire interface for management specifications compliant with SFF 8472 digital diagnostic, Compliant with SFF8472 Digital Diagnostic Standard(DDM)
The SFP+10G-LR modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.It is a mallest 10G form factor Supports 10GBASE Ethernet and OTU2/OTU2e .
Recommended Operating Conditions
| Parameter | Symbol | Unit | Min | Typ | Max |
| Storage Temperature Range | Ts | ℃ | 0 | 70 | |
| Power Supply Voltage | Vcc | V | 3.135 | 3.465 | |
| Data Rate | Gb/s | - | 10 | - |
Specification of Transmitter
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Average Output Power | POUT | -6 | 1 | dBm | Note (1) | |
| Extinction Ratio | ER | 3.6 | 5.0 | dB | ||
| Center Wavelength | λC | 1260 | 1270 | 1280 | nm | DFB Laser |
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||
| Spectrum Bandwidth(-20dB) | σ | 1 | nm | |||
| Differential Line Input Impedance | RIN | 90 | 100 | 110 | Ohm | |
| Output Eye Mask | Compliant with IEEE802.3 z (class 1 laser safety) | Note (2) | ||||
Note (1): Measure at 2^7-1 NRZ PRBS pattern
Note (2): Transmitter eye mask definition
V. Specification of Receiver
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Input Optical Wavelength | λIN | 1320 | 1330 | 1340 | nm | PIN-TIA |
| Receiver Sensitivity | PIN | -14 | dBm | Note (1) | ||
| Input Saturation Power (Overload) | PSAT | -3 | dBm | |||
| Los Of Signal Assert | PA | -30 | dBm | |||
| Los Of Signal De-assert | PD | -17 | dBm | Note (2) | ||
| LOS Hysteresis | PA-PD | 0.5 | 2 | 6 | dB |
Note (1): Measured with Light source 1330nm, ER=5dB; BER =<10^-12 @PRBS=2^7-1 NRZ
Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)
Ethernet SFP+ Fiber Optic Transceiver Module TX1270nm DFB RX1330nm 10Gbps 20KM BIDI Simplex
Inquiry Cart
0