Single Chamber 6 MPa Sinter HIP Furnace With Graphite Heating Element
Brand Name:Ruideer
Certification:CE;ISO9001;ISO14001;OHSAS 18001;GB/T29490
Model Number:300*300*600
Minimum Order Quantity:1 set
Delivery Time:100-120 work days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Zhuzhou Hunan China
Address:
No.755, Xianyuehuan Rd, Tianyuan District, Zhuzhou, Hunan Province
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
300*300*600-6MPA sinter-HIP furnace for manufacture of high performance cemented carbide
Main application
For lab research of high-performance cemented carbide materials which gathered dewaxing (It can realize vacuum dewaxing,H2 dewaxing,binder can be paraffin or PEG),Vacuum sintering,Low pressure Argon dynamic partial pressure sintering , High pressure Argon sintering,cooling,heat preservation and heating up under high temperature high pressure status.
General structure
This kind of vacuum pressure sintering furnace for cemented carbide
research, which is single room , horizontal type , recycle heating
furnace,it adopt graphite heating element of low voltage and large
current .All the technical process is automatic
controlled,monitored,chased,fault diagnosed which showed and
recorded by computer.
- Design standard:GB150,20-year service life,double doors horizontal structure,6000 times;
- Horizontal design for easy loading/unloading and easy maintenance;
- Automatic control of the entire process;
- This kind of sinter-HIP furnace for cemented carbide production,it includes control system,heating system,dewaxing system,vacuum system,partial pressure sintering system,gas pressure sintering system,rapid cooling system,Assist System ,Security System.
Technical parameters
| Service life | 6000times / 20-years service life |
| Useful space | ≥300×300×600mm |
| Max. Loading weight | 100kg(According to Sinter products and loading space) |
Max. Designed temp. | 1600℃(Heating up temperature) |
| Max. Working temp. | 1550℃ |
| Max. working pressure | ≤58bar |
| Ultimate vacuum degree | 1pa(After heating,cold,empty,dry condition) |
| Pumping speed | The vacuum degree up to 5 pa within 30min after starting pump,the vacuum degree can get to 3pa after pumping continually within 30min,(after empty sintering,in empty,clean,cold condition) |
Leakage rate (In average24h) | 3pa/h(After testing ultimate vacuum,under empty cold,clean condition,test in average 24h) |
| Wax-collection rate | ≥98% (Argon or Nitrogen dewaxing with 10k absolutely, average not more than 3 times ) |
Max. Ramp up rate | 8℃/min(Room temperature ramp up to 1450℃ in vacuum,empty loaded condition,can be soaked in process when 600℃,1000℃ and 1200℃. ≤5℃/min when Fully loaded |
| Pressurized time | ≤20min Can be set(When Gas source keep around 130bar,pressurized to required pressure) |
| Cooling time | ≤4 hours( From 1450℃ drop to 100℃ when fully-loaded,water temperature≤30℃,50bar≤ pressure≤58bar ) |
After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
Single Chamber 6 MPa Sinter HIP Furnace With Graphite Heating Element
Inquiry Cart
0