Add to Cart
Explosion Proof Sawdust Removal System With Cartridge Dust Collector 3020X2150X3520
CDC Downward Flow Cartridge Dust Collectors
Model | Dimension(mm) | Modular (pcs) | Filter Area(㎡) | Pulse Valves | Filter Cartridge QTY(pcs) | G.W.(KG) | ||||
Length | Width | Height | Polyester | Paper | Size | QTY(pcs) | ||||
CDC1-1 | 1670 | 635 | 1366 | 1 | 9.4 | 23 | 3/4" | 1 | 1 | 473 |
CDC2-2 | 1670 | 635 | 1860 | 1 | 18.8 | 46 | 2 | 2 | 633 | |
CDC3-3 | 1670 | 635 | 2315 | 1 | 28.2 | 69 | 3 | 3 | 748 | |
CDC8-2 | 1014 | 2150 | 2520 | 1 | 75 | 168 | 1" | 4 | 8 | 925 |
CDC12-3 | 1014 | 2150 | 3520 | 1 | 112 | 252 | 6 | 12 | 1216 | |
CDC16-4 | 1014 | 2150 | 3970 | 1 | 150 | 336 | 8 | 16 | 1280 | |
CDC18-3 | 1514 | 2150 | 3520 | 1 | 170 | 378 | 9 | 16 | 1510 | |
CDC24-3 | 2018 | 2150 | 3520 | 2 | 225 | 504 | 12 | 24 | 1865 | |
CDC32-4 | 2018 | 2150 | 3970 | 2 | 300 | 672 | 16 | 32 | 2235 | |
CDC36-3 | 3020 | 2150 | 3520 | 3 | 338 | 756 | 18 | 36 | 2615 | |
CDC48-4 | 3020 | 2150 | 3970 | 3 | 451 | 1008 | 24 | 48 | 3185 | |
CDC48-3 | 4023 | 2150 | 3520 | 4 | 451 | 1008 | 24 | 48 | 3450 | |
CDC64-4 | 4023 | 2150 | 3970 | 4 | 601 | 1344 | 32 | 64 | 4070 | |
CDC60-3 | 5026 | 2150 | 3520 | 5 | 564 | 1260 | 30 | 60 | 4430 | |
CDC72-3 | 6030 | 2150 | 3520 | 6 | 676 | 1512 | 36 | 72 | 4830 | |
CDC80-4 | 5026 | 2150 | 3970 | 5 | 752 | 1680 | 40 | 80 | 5085 | |
CDC96-4 | 6030 | 2150 | 3970 | 6 | 902 | 2016 | 48 | 96 | 6070 | |
CDC112-4 | 7040 | 2150 | 3970 | 7 | 1052 | 2352 | 56 | 112 | 7040 | |
CDC128-4 | 8050 | 2150 | 3970 | 8 | 1203 | 2688 | 64 | 128 | 8000 |
Tips
Use the Right Parts
Make sure your dust collector system is using the right parts, from
the blower, dust filter, a filter-cleaning system, dust receptacle
or dust removal system, to cartridges and baghouse solenoids, fans
and valves. Each part plays a role to ensure the collector is
operating at design point. We recommend using factory recommended
replacement parts and be leery of less expensive alternatives.
Is Your Hopper Free of Dust?
A duct collector’s hopper should never be used to store dust. The
hopper is intended to funnel process dust to a storage bin. Dust
accumulating in a hopper creates a potential fire or deflagration
risk. Dust in your hopper will also clog the system and diminish
the collector’s performance and prevent the pulse-cleaning from
doing its job.
Check Diaphragm Valves
It’s smart to make checking your diaphragm valves a priority each
year. Particularly when new baghouses or cartridges are installed,
it is recommended to check the valves and ensure that all filters
are cleaned properly from the beginning. Remember that it’s always
cheaper to replace diaphragm valves that it is to buy new filters
because of inadequate pulsing. (Remember to wear appropriate ear
protection when testing pulse valves as the noise level can rise
considerably.)
Regularly Check Your Ductwork
The National Fire Protection Association requires protection for
the ductwork and safety processes upstream of the dust collector.
It’s smart to equip your ducting with a flow-activated isolation
valve protecting downstream work areas from the propagation of
flame and pressure through the inlet duct when deflagration occurs
in a dust collector. If there is deflagration in a dust collector,
the pressure will close the valve preventing the passage of flame
and smoke to areas upstream from the valve. The valve latches shut
and must be reopened manually. Some parts of the valve may be
damaged, and a thorough inspection is required before the valve is
back in service.