250kw Power Generator Low Speed Francis Turbine Generator For Hydro Power Plant

250kw Power Generator Low Speed Francis Turbine Generator For Hydro Power Plant​

Our main products included:

1. Kaplan turbine generators series.

2. Turgo turbine generators series.

3. Tubular turbine generators series.

4. Francis turbine generators series.

5. Pelton turbine generators series .

Product features:

The Francis turbine is also called the Francis turbine. The water flows radially from the surrounding into the runner, and then flows out of the runner approximately axially. The runner consists of the upper crown, the lower ring and the blades.
When water flows through such a turbine wheel, it enters in a radial direction and flows out axially, so it is also called a radial axial flow turbine.
It is suitable for water heads ranging from 20 meters up to 700 meters. It is simple in structure, stable in operation and high in efficiency, but it is generally used in the middle head range (50 meters to 400 meters). Single machine output from tens of kilowatts to hundreds of thousands of kilowatts. At present, the maximum output of such turbines has exceeded 700,000 kilowatts. It is one of the most widely used turbines.

1,suitable for high head,small flow and flow changes in large runoff hydropower station;

2.With the power plant investment is small,compact units structure characteristics;

3.Has the efficiency changes smoothly,operating a wide range,even in the 15%-20%load is reduced efficiency;

4.Suitable for high head amall flow station in mountain area;

5.A unit construction,simple restrictions without cavitation condition,the advantages of stable ooperation,less investment,construction area.

Product parameters:

Product pictures:

Company Information

Our Workshop

Packing and Shipping

FAQ

Q1, Which turbine should I choose?

Please tell me the water head, flow rate, frequency, Total power you need

, voltage, on grid or off grid operation, we will propose a solution.

Q2, Can your factory provide all the equipment for hydropower generation?

Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.

Q3,Is your company a trading company or a manufacturer?

We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.

Q4, What is an acceptable MOQ?

For this product, our acceptable MOQ is 1 set.

Q5,How long is the delivery time?

Delivery times range from 15 days to 6 months depending on the model you are purchasing.

Q6,Does your company have its own independent official website?

Of course, and we can see more information about our company and products on our official website.

Q7,Will your factory test for us after the production is finished?

Of course, before delivery, our technicians will complete the debugging of all the equipment to eliminate the faults caused by improper debugging of your hydro power plant

Installation design drawings:

Chengdu Forster Technology is focused on design and manufacturing hydro turbines. The company was founded in 1956. Forster is the first Chinese state-owned enterprise and spares no effort to expand international market in 2013，At present, we have obtained orders in many water-rich areas such as Europe, Asia, South America, North America, etc., and as partners, we are qualified as long-term suppliers in many regions.

The capacity of hydro turbines is up to 50KW-30MW for a unit. The main hydro turbines areTurgo turbine ,pelton turbines, francis turbines, kaplan turbines ,bulb tubular turbines and other types of turbines.Foster also supplies governors, valves, transformers, monitoring systems, microcomputer integrated control panels and other equipment for hydroelectric power plants.

Forster is strict to IEC international standard and national standard. It has CE,ISO,TUV,certificate. The hydro turbines have different types, specifications and reliable quality with characteristics of reasonable structure, reliable operation, high efficiency, standardized parts ,convenient maintenance.

After obtaining the certification of IS09001/2000 quality management system, we still adhere to the rigorous work style formed in the turbine industry for many years, constantly and independently improve and perfect the management system of the enterprise, cherish and value the rich experience accumulated in the turbine production for decades, and constantly increase the technical force and Equipment input, focusing on the production, manufacture and installation of hydro-generator set equipment, auxiliary equipment of power station, production and manufacture of over-current components, repair and Capacity Upgrading of various power plant.

Forster always provides technical advice, services and the best technical solutions to customers based on their parameters. At the same time, it keeps offering after sale service for our product.

We always adhere to the principle of honesty and pragmatism, quality first, will be broad-minded, the attitude of life into our work, and strive to create a win-win situation for customers, enterprises and society. In the fierce market competition, we have always adhered to the details of success or failure, focusing on the achievement of excellence in the spirit of enterprise. In the friendly cooperation with customers at home and abroad, we have been pursuing the business philosophy of creating maximum value for customers.