

Add to Cart
This High-intensity Type B Aviation Obstruction Light flashing
white color 24 hours and designed for marking top of obstacle that
exceed 150 meters in height.
Ultra high intensity CREE LED is used for the light source ensure
light’s long life experience and good performance. Self-designed
reflection board ensure less LED could emitting brighter light.
Compliance
** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 High
Intensity Type B Obstruction Light
** FAA L-857
Electrical
* CREE ultra high intensity LED as light source saving power
* Power supply available in DC(48V) or AC(110V, 240V)
Physical
* Unique design and UV protected polycarbonate lens for converging
light and saving LED power
* UV protection Powder coated bright yellow color base make better
visibility
* Base material is powder coated die-casting aluminum which has
strong corrosion resistance, Shock and Vibrations protection
* Special valve installed beside the base to make sure the air
could go through but water is avoid, so that the whole light
temperature won’t be high to destroy the light
System design
Built-in photocell for day/twilight/night operation
Surge and lightning protection
Optional
Alarm contact for remote monitoring
Infrared LED for pilot using NVG
RS485 communication part for monitoring
User adjustable flashing rate(40, 50, 60 flashes/minute)
GPS synchronization
Application
AH-HI-B0 High-intensity light is used on the top of the High-rise
Building, High Chimney, marking towers (Telecom, GSM,Microwave
& TV), High Pole, Tower Crane, Wind Turbine, etc when the
obstacle height is more than 150meter, and most time work with low
intensity lights & medium intensity light installed on the
lower place
More detailed parameter:
SPECIFICATIONS | AH-HI-B0 LED High-intensity Aviation Obstruction Light |
Light Characteristics | |
Light Source | CREE high intensity LED |
Available Colors | White |
Intensity(cd) | ≥100,000cd(Daytime) |
≥20,000cd(Twilight) | |
≥2,000cd(Night) | |
Horizontal Output(degrees) | 120 |
Vertical Divergence(degrees) | 3-7 |
Flash Characteristics | 40-60FPM(40fpm as factory setting) |
Operation Mode | 24hours operation, 3 different modes |
LED Life Experience(hours) | >100,000 |
Electrical Characteristics | |
Operating Voltage | DC(48VDC) or AC(110, 240V) or others |
Average Power(W) | 40W(24hours working) |
Circuit Protection | Integrated |
Physical Characteristics | |
Body Material | Polycarbonate |
Base Material | Powder coated die-casting aluminum |
Mounting | 470×120×θ12 |
Dimension(mm) | 510×196×245 |
Weight(kg) | 9 |
Product Life Expectancy | 5 years Plus |
Environmental Factors | |
Humidity | 0%-100% |
Wind Speed | 80m/s |
Waterproof | IP67 |
Compliance | |
ICAO | Annex 14 Volume 1,'Aerodrome Design and |
Operations’ Seventh edition 2016, table 6.3 | |
High-intensity Type B White Obstacle Light | |
FAA | L-856, L-857 |
Options Available | |
NVG(Night Vision Goggles) compatible LED | |
GSM Monitoring | |
GPS Sync Flashing | |
Dry Contact alarm(NO COM NC) | |
User adjustable flashing rate (40, 50, 60) | |
Solar power system |
Light photo:
Contact us:
FAA L857 Warning Light, LED High Intensity Wind Turbine Obstruction Light White Color Obstacle Light
Datasheet download: download AH-HI-B0 LED High-intensity Aviation Obst...