1000M Cascade Fiber Media Converter Optical Ethernet Switch With 3 RJ45 Ports

FAMC-GDSR3S2-20 , 1000M Cascade Fiber Optic Media Converter Optical Ethernet Switch With 3 RJ45 Ports

How much attenuation can't be loaded by Gigabit fiber media converter? -28 dbm.

Attenuation is closely related to ACR, and small attenuation will contribute to the improvement of ACR. The attenuation of the cable depends on many factors like structure, length and environmental temperature. How to reduce the attenuation of the fiber optic media converter? There are several measures to reduce the attenuation:

A) the total length of the horizontal cable and the work area cable is not more than 100 meters. According to the attenuation formula, the longer the cable is, the greater the attenuation is.

B) do not lay long cables in the metal conduit and near the surface of any other conductor, it will reduce 2%/3% of additional attenuation. In addition, the high temperature will also seriously increase attenuation. Among all the characteristics of the cabling system, crosstalk has the biggest impact on the network performance, it affects the following parameters: NEXT, Power sum, ACR, etc., reducing crosstalk value is conducive to the improvement of the above parameters.

Specific measures to reduce crosstalk are:

A) In wire pairing connection, it should be in accordance with the TIA - 568B standard to connect, otherwise, string connection will produce serious crosstalk. If NEXT can not pass the test, not only that, a series of parameters related to NEXT, such as ACR, will also be unable to pass the test because of wires pairing, that is to say, the original high quality of the cable will become very poor performance due to string connection.

B) when the cable is apart to connect or install to the patch panel or frame, make the non twisted part as short as possible, the longest is no more than 13mm.

In addition, besides the above-mentioned methods, when install the cable, the cable shall be treated carefully without too much force, bending radius of the cable shall comply with the provisions of the index of the cable manufacturer, it is the only way to maintain the structure of the cable, which contributes to the improvement of technical indicators. This is also the basic requirements for construction.

Technical Parameters Of Cascade Media Converter

Product Features Of Cascade Ethernet Switch

1, Complies with IEEE802.3 and IEEE802.3u standards;

2, Flow control mode: full duplex adopts IEEE802.3x standard, half duplex adopts Backpressure technology;

3, With 3 pcs 10/100M adaptive RJ45 ports, support auto flip (AutoMDI/MDIX);

Provides 2 pcs 1000M optical interface, to meet the requirements of long distance transmission. Supports 3 groups VLAN and MTU VLAN functions, with a minimum particle size of 128kbps

Use external 5V2A switching power supply.

4, Supports IEEE802.1p priority protocol mode, secondary static port priority mode and ToS priority mode;

5, Supports broadcast storm control;

6, Provides fixed IP address settings;

7, Support upgrade of switch system software, storage and recovery of configuration files;

8, This product is specially designed for network HD 1080P 200W/300W/500W cameras.

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.