1.25Gbps Brand Compatible 1x9 Fiber Optical Transceiver 3.3V 40KM SC Simplex

FA-TC912S35-40 & FA-TC912S53-40, 1.25Gbps Brand Compatible 1x9 Fiber Optical Transceiver 3.3V 40KM SC Simplex

After installing an optical transceiver, to test its performance is an essential step. When all optical devices in the network are supplied by same vendor, if the network system is working properly, there is no need to test subcomponents separately. However, most of the components in the network come from different vendors, so it is very important to test the compatibility and interoperability of optical devices, especially each optical transceiver. How to test the compatibility of fiber optical modules?

We know that an optical transceiver consists of a transmitter and a receiver. When the transmitter is connected to the receiver through the optical fiber, if the BER of the whole system does not achieve the desired effect, is the problem of transmitter or the receiver? Or maybe there are problems with both transmitter and receiver. In fact, the transmitter and receiver optical module will influence each other, therefore, the standard of qualified fiber optical transceiver is any receiver can receive the optical signal from the transmitter which is even with the worst performance, and any transmitter can emit optical signal which can be received by the receiver with the worst performance.

Testing of optical transceiver is generally divided into 4 steps, which are mainly divided into transmitter testing and receiver testing.

Transmitter test, in testing, pay attention to the wavelength and shape emitted by the transmitter, as well as the receiver's jitter tolerance and bandwidth, and should note two points:

1, The quality of the input signal used to test the transmitter must be good enough. In addition, also need to confirm the quality of electrical measurement by jitter and eye diagram. Eye diagram is a common method to check output waveform of the transmitter, because the eye diagram contains abundant information and it can reflect the overall performance of the transmitter.

2, The output optical signal of the transmitter must be measured by eye diagram, optical modulation amplitude and extinction ratio and so on.

Receiver test, when test the receiver, also need to pay attention to the following two points:

3, Different with the test of transmitter, when test receiver, the optical signal quality must be poor enough, therefore, must create a optical pressure which can represent the worst signal, the optical signal must be calibrated through the worst jitter and optical power test.

4, And finally, need to test the electronic output signal of the receiver.

In summary, testing optical transceiver is a complex task, but it is also an indispensable step to ensure good performance.

Product Specification Of 1x9 Optical Fiber Transceiver

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.