Pole / Wall Mounted Fiber Optic Splice Enclosures , Fiber Dome Closure 240 Cores

FA-FSC-V3, Vertical Type Fiber Cable Splice Closure For Pole Or Wall Mounted Max 240 Cores

After the fiber optic cable is stripped, the fiber optic cable should be fixed inside the fiber optic splice closure, and the loose tube should be opened and finish all the preparations before the optical fiber fusion.

At this point should pay attention to: The loose tube can not be twisted.Before fixing the fiber cable, must pay attention to the position of the loose tube , when the strengthen member passes through the fixing screw, the filler must be above the strengthen member and it can not be the loose tube with fibers inside, the tube with fiber should be positioned on the same side of the strengthen member and it can not be twisted with the reinforcing member. If the reinforcing member is pressed on the fiber core ( loose tube with fiber), the fiber core tube will be deformed and the loss will increase. The fiber inside the loose tube will be broken due to the long-term stress, which will cause hidden trouble for the transmission.

Length of the strengthen member should be appropriate . When the loose tube is fixed, we will continue to fix the fiber cable. It need to ensure the fiber will not move in the fiber optic splice closure and avoid increased loss or breakage for the fiber. The fixing work can be divided in to twp parts: fixing of the strengthen member and fixing of other parts of the fiber cable. It should pay attention to the length of the strength member, if it is too long it may not have enough space for it, if it is too short, it can not play its fixing role. Generally, after cutting the strengthen member, the length of the strengthen member between the clamping plate of the fixed optical cable and the fixed screw of the strengthen member is equal. The fixing of other parts is after the strengthen member is fixed, tightening the clamp with the screws and fastening it firmly to the entrance of the cable inlet of the fiber splice joint closure.

The length of the loose tube should be opened and stripped properly. When the optical cable is fixed, the fiber core can be opened and stripped. If the stripping length is too long, it will reach the slot for heat shrinkable tube, and will damage fiber during winding fiber; If the stripping length is too short, the fixed clip will be stuck on the optical fiber when the loose tube is fixed, which will damage the optical fiber easily. Therefore, generally the appropriate length is stripped it over to the two fixed bayonet, in this length, the loose tube with fiber inside will not cause damage to the optical fiber, but also can be well fixed. But the clip can not be too tight when it is fixed, otherwise the loss fiber will increase due to extra force, as time rolled by, the fiber will break and bring trouble for the project.

Main Components Of FA-FSC-V3

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.