SR208C WIFI Controller Split Pressure Solar Water Heater SR208C Controller

SR208C WIFI Controller Split Pressure Solar Water Heater SR208C Controller

Introduce:

SR208C WIFI.

A BRIEF DESCRIPTION

Temperature measurement accuracy:0.1
Conventional/HE pump both available on

APPLICATIONS CAPACITY
Max.number of collectors:1
Max.number of storage tanks:1
Max.number of relays:2
Max.number of sensors:3
Max.number of visualization application system:1

TECHNICAL DATA
Size of Controller:178mm x120mm x43mm
Power supply:AC100-240V,50-60Hz. .
Power consumption: < 2.5W
Accuracy of temperature measuring: ± 0.1oC
Range of collector temperature measuring: -10oC ~220oC
Range of tank temperature measuring: 0oC ~110oC
Suitable power of pump: 1 pump possible to be connected, output power < 300W .
Suitable power of HK (backup heating): 1pc ˂500W .
Inputs: 3 sensors,
1pcs*Pt1000 sensor (≤500oC) for collector (silicon cable≤280oC),
2pcs*NTC10K, B3950 sensor (≤ 135oC) for tank, (PVC cable ≤105oC),
Outputs:2 relays, for circulation pump and backup heating
Ambient temperature:-10oC ~ 50oC.
Water proof grade: IP41

Main technical data:

Size of Controller:178mm x120mm x43mm
Power supply:AC100-240V50-60Hz. .
Power consumption: < 2.5W
Accuracy of temperature measuring: ± 0.1oC
Range of collector temperature measuring: -10oC ~220oC
Range of tank temperature measuring: 0oC ~110oC
Suitable power of pump: 1 pump possible to be connected output power < 300W .
Suitable power of HK (backup heating): 1pc ˂500W .
Inputs: 3 sensors
1pcs*Pt1000 sensor (≤500oC) for collector (silicon cable≤280oC)
2pcs*NTC10K B3950 sensor (≤ 135oC) for tank (PVC cable ≤105oC)
Outputs:2 relays for circulation pump and backup heating
Ambient temperature:-10oC ~ 50oC.
Water proof grade: IP41

Main functions:

AH Afterheating/thermostat
Password protection
LOAD Tank heating
OCEM Collector emergency shutdown
OCCO Collector cooling
OCMI Collector minimum temperature
OCFR Antifreeze
OTCO Tube collector
PUMP Pump control mode
OSYC System cooling
OSTC Tank cooling
MAN Manual mode
BLPR Blocking protection
OTDI Thermal Disinfection
UNIT C-F switch
BEEP beeper fault warning
Memory function
Screen protection
Trouble checking

System:

Holiday function

The holiday function is used for operating the system when no water consumption is expected, e. g.

during a holiday absence. This function cools down the system in order to reduce the thermal

load.When bottom temperature of tank below down 35oC,the solar pump is deactivate.Manual of SR208C intelligent controller

Activate/deactivate this function:

►Press “ ” button for 3 seconds, “HDAY 05” displays on the screen

►Press “▲/▼”, to adjust holiday’s days, adjustable range 0-99 days

►Press “ ” for 3 seconds again, to adjust holiday’s days to 0,

►Press “ESC” to exit, holiday function is closed

Note:When you return from holiday, please deactivate this function in time.

WIFI Remote Control is available for SR208C WIFI only.

SR208C

SR208C Solar Controller Water Heater Controller for split solar system.

1 pt1000 and 2 ntc10k temperature

2 years warranty

Working Principle

1 collector array.

1 storage tank.

1 pump and auxiliary heating.

Description: The solar circuit pump (R1) is switched on as soon as the switch-on temperature difference (Delta Ton) between the collector array (T1) and the storage tank (T2) is reached.

If the temperature difference between the collector array (T1) and storage tank (T2) drops below the switch-off temperature difference (Delta T off), or the temperature of storage tank (T3) reaches the preset maximum storage temperature, then the solar circuit pump ( R1) is switched off.

Back-up heating by auxiliary boiler Within the preset time section of back-up heating, if the temperature T3 is below the switch-on temperature, then the circulation pump ( H1) of back-up heating is triggered, when T3 is heated to the switch-off temperature, circulation pump H1 of back-up heating is ceased.

1. Appearance of controller: 178mm×120mm×43mm

2. Power supply: AC230V±10%

3. Power consumption: < 3W

4. Accuracy of temperature measuring: ±2centigrade

5. Range of collector temperature measuring: -10~220centigrade

6. Range of tank temperature measuring: 0~110centigrade

7. Suitable power of pump: 3, <= 600W

8.inputs: 1 x Pt1000 sensor (<=500 centigrade) for collector (silicon cable<=280 centigrade),

9. 2 x NTC10K, B3950 sensor (<= 135centigrade) for tank, (PVC cable <=105centigrade),

10. Outputs: 1 relays, for circulation pumps

11. 1 relay for electrical heater

12. Ambient temperature: -10~50 centigrade

Main Functions

1.Main menu DT O & DT F Temperature difference function

2.Main menu-THET timing heating

3.TEMP Temperature main menu

4.EM Emergency collector temperature (emergency switch-off temperature of collector)

5.CMX Maximum limited collector temperature (collector cooling function)

6.CMN low temperature protection of collector

7.CFR frost protection of collector

8.SMX Maximum temperature of tank

9.REC Tank re-cooling function

10.Celsius and Fahrenheit temperature transferring

12.PASS Password setting

13.LOAD Recovery to factory setting

14.Manual heating

15.Temperature query function

16.Protection function

18.Anti-dry heating Protection

19.Screen protection

Technical datas:

Suitable for pressurized solar system

<1> Dmension: 178x120x43mm
<2> Power supply:200V-240V AC or 100V-130V AC,50-60Hz
<3> Power consumption: < 3W
<4> Accuracy of temperature measuring: ± 2oC
<5> Range of collector temperature measuring: -10oC ~200oC
<6> Range of tank temperature measuring: 0oC~110oC
<7> Suitable power of pump: 2 pumps possible to be connected, power of each pump < 200W .
<8> Inputs: 3 sensors,
1pcs*Pt1000 sensor (≤500oC) for collector (silicon cable≤280oC),
2pcs*NTC10K, B3950 sensor (≤ 135oC) for tank, (PVC cable ≤105oC),
<9> Outputs:2 relays, for circulation pumps or 3-way electromagnetic valve
<10> Ambient temperature:-10oC ~ 50oC.
<11> Water proof grade: IP40.

Main functions:

<1> Timing heating
<2> Temperature difference control 1*ΔT
<3> Collector emergency shutdown
<4> Collector cooling function
<5> Collector low temperature protection
<6> Collector frost protection
<7> Tank re-cooling function
<8> Celsius and Fahrenheit temperature switch
<9> Maximum temperature of tank ( 1*storage tank)
<10> Manual Control( for 2 outputs:P1,H1)
<11> Password setting
<12> Recovery to factory setting
<13> Manual Heating
<14> Temperature query function
<15> Memory Protection
<16> Screen protection
<17> Trouble shooting
<18> Trouble protection
<19> Trouble checking

Flat Panel Split Solar Water Heater

with Double Coils PTS-F2

Heat Pipe Split Solar Water Heater
with Double Coils PTS-H2

JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. is a manufacturer of Solar Water Heater since 1996.

As an experienced company, we can provide the perfect solution for Solar Thermal System.

Our products include solar water heater, solar collector and accessories.
We have advanced technology and equipment, specialized in producing the following solar thermal products:
A. Thermal Solar Water Heater

B. Flat Plate Solar Water Heater

C. Heat Pipe Solar Water Heater

D. Vaccum Tube Solar Water Heater

E. Split Solar Water Heater

F. Pre Heated Solar Water Heater

G. Flat Plate Solar Collector

H. Heat Pipe Solar Collector

I. U Pipe Solar Collector

J. Vacuum Tube Solar Collector

The solar water heater applies to family, underfloor heating, factory, hotel, swimming pool etc.
Survive on quality and seek development with prestige.
Welcome to visit our factory for friendship and business.