

Add to Cart
1500 liters Centralized Solar Water Non Pressure Solar Collector
Sun Heater System
Working Principle
1. Firstly, the storage tank shall be filled with cold water, the
collector loop shall be pumped with water
2. The water in collector loop then will be heated with solar
radiation to vacuum tubes
3. When temperature discrepancy sensed between solar collector and
storage tank reaches set value in controller, the controller shall
start the circulation pump automatically
4. The circulation pump makes water circulate in the loop
5. Hot water would be pumped into storage tank and the loop again
be pumped with cold water from the bottom of storage tank
6. In case the temperature in storage tank does not reach set value
you want, then the auxiliary electrical heater would start to
assist heating
7. When temperature discrepancy sensed between solar collector and
storage tank is below the set value in controller, the circulation
pump shall stop automatically
8. If the water temperature has not reached the expected value set
in the controller, then the auxiliary heating device would start to
assist solar water heating
9. Eventually the water will get heated enough as expected ready
for use
Advantage
1) Strong adaptability
2) Wide application occasions
3) High degree of automation
4) Economical and practical
5) Environmental conservation and energy
6) In large-scale projects, auxiliary heating system, computerized
controller and pipe cycling system
7) According to the required configuration, it can be divided into
two types. One is vertical and the other is horizontal
8) with large heat collecting capacity
Applications
1) Hotels, resorts, hospitals and hostels
2) Process industry, boiler feed, laundry and canteens
3) Agricultural sector, hatcheries and dairies
4) Process industry, Boiler feed, Laundry and canteens
5) Agricultural sector, hatcheries, and dairies
6) Swimming pool heating
7) In-process heating
8) Health clubs (Steam / Sauna)
Specifications
Modle | PT-NC-15 | PT-NC-20 | PT-NC-25 | PT-NC-30 | PT-NC-40 | PT-NC-50 | PT-NC-60 | |
Quantity of Tubes | 15 | 20 | 25 | 30 | 40 | 50 | 60 | |
Contour aperture area | 1.94m2 | 2.58m2 | 3.22m2 | 3.88m2 | 5.16m2 | 6.44m2 | 7.76m2 | |
Manifold | Inner shell: 304 2B | Foaming: High pressure polyurethane | ||||||
Three Target Vacuum Tube | Diameter/Length: φ58mm/1800mm; High boron and silicon content 3.3; Structure:Gradual change SS-AL-Nx/Cu selective absorption coating; Vacuum Degree:P<=5*10-3; | |||||||
Anti-dust Ring | White Silicon Rubber | |||||||
Work Pressure | 0.05Mpa | |||||||
Bracket | Galvanized Steel with Plastic Coating in Black color - 0/20/30/45 degrees | |||||||
Tailstock | ABS | |||||||
OEM Service | Logo painting on products and package is for free (20FT,40FT,40HQ) |
Warranty:
6 years international responsibility for U pipe solar collector and
15 years for vacuum tubes due to original quality problems.
Payment term:
1. T/T 30% Deposit in advance and balance should be paid after
receiving the B/L copy.
2. L/C at sight (if your quantity reaches 5*40’ HQ container)
3. Sample order or LCL: we accept western union and one touch
business.
Packaging & Delivery
Packaging Details:
Export carton for full container.
Delivery Detail:
7 days after receiving the deposit.
PDF Catalogue of Non Pressure Solar Collector.
PT-NC Non Pressure Solar Collector.pdf