Servo Control Computer System Tensile Testing Machine 0.5KVA
Brand Name:Skyline
Certification:ISO，ASTM, DIN
Model Number:Lab Testing Equipment
Minimum Order Quantity:1 unit
Delivery Time:15 working days
Payment Terms:T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China
Supplier`s last login times:
within 14 hours
Product Details
Company Profile
Product Details
Servo Control Computer System Laboratory Testing Equipment Tensile Testing Machine
Servo Control Computer System Tensile Testing Machine
Description of lab testing equipment
This machine is controlled by computer and is widely used in the mechanical property test of rubber, plastic, wire and cable, textile, waterproof materials, non-woven fabrics and other non-metallic materials as well as metal wires, metal foils, metal plates and metal bars. It is also suitable for the tensile, compression, peeling, shearing, tearing and bending (folding) tests of various finished products with special clamps. It can print multiple data, and can make graphic output comparison according to different data, with high control precision and simple operation; Modular design is adopted, and various accessories are complete and flexible.
This machine is mainly used for testing the mechanical properties of metals such as tension, compression, bending, etc. It can also realize multiple dead cycle tests such as constant stress, constant strain, creep, relaxation, axial, radial, etc. The tensile strength, yield strength, elongation, constant elongation stress, constant stress elongation, elastic modulus and other parameters can be automatically calculated according to GB, JIS, ASTM, DIN and other standards.
Introduction to control software
Software operating system language: Simplified Chinese.
Force value unit: N, KN, Kgf, Lbf, length unit: mm, cm, in, freely convertible
Control mode: computer software sets speed, load break (break), running time and other control modes
Special manual operation box: it is convenient for calibration and positioning when holding the test piece
Automatically judge material fracture, crushing, etc. and automatically stop the machine. Automatic return can be set
Curve type: Load displacement, load time, displacement time.
Stress strain, strain time, stress time.
The vertical and horizontal coordinates of the curve can be set arbitrarily.
Available test data: maximum strength, minimum strength, breaking value, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum, minimum and average values of stripping interval, etc. (To be selected by the customer before ordering) It has multiple protections such as overload, overcurrent, overvoltage, undervoltage, overspeed, travel, etc. The data results are exported from the crystal report format currently adopted by the national standard.
Specifications:
| Capacity Selection(kg) | 100,200,500,1000,2000 |
| Precision | Level 0.5, the accuracy of test force indication is better than ± 0.5% |
| Load Sensing | High precision tension pressure transducer |
| high resolution | 1/100000 |
| Magnification | 24 bit AD stepless amplification |
| Unit selection | N, KN |
| Test speed range | 0.5~500 mm/min |
| Speed control accuracy | ± 0.2% (Grade 0.5) |
| Test effective width | 400mm |
| Test stroke (including fixture) | 800mm |
| Overload setting protection function | When exceeding 10% of the set test force, the system automatically stops for protection |
| Travel setting protection function | Setting protection of upper and lower limit of travel, |
| Power | AC servo motor&servo drive controller |
| Power consumption | 0.5 kVA |
| Power supply | 1ø, 220 VAC, 50/60 Hz |
| Hardware Specification | The computer hardware specifications provided shall be purchased from the original ACER brand, or provided by the customer |
| Special software | Refer to the software version of the computer measurement system |
| Standard accessories | One set of tension clamps, one set of tools, one manual and one warranty |
| Punctuation extensometer | Large deformation (gauge length: 25,50,75,100mm) |
| Fixture | Refer to fixture catalog for purchase, or provide sample specifications for design and manufacturing |
Servo Control Computer System Tensile Testing Machine 0.5KVA
Inquiry Cart
0