Digital Display Push Tension Meter
Product introduction
The push-pull force meter is mainly divided into a pointer type
push-pull force meter and a digital (digital display) force-pull
force meter. The digital display force gauge is easy to read and
easy to operate. It can communicate directly with the computer
through the RS232 interface. The optional special software can also
record/analyze the data waveform. There is also a digital display
force gauge that can be directly connected to the printer. The test
data is printed out.
Application
Push-pull force tester is used for push-pull load test, insertion
force test, damage test, etc. of various products. It can perform
tensile test, pressure test, insertion force test, split force
test, pull force test, Pull-out strength test, bending force test,
peel force test, extension force test, hardness test, breaking
force test and switch pull-out test.
The following is a test case
Pulling force: The force of spring, rubber, etc. is easily
measured.
Pressure: The measurement of the operating force of the switch
button, such as the pressure measurement of the button of the
mobile phone/phone button.
Insertion force: The insertion force and pull-out force of the
joint can be tested at the same time.
Cracking force: For example, the peak cracking force of new
materials such as glass, carbon, ceramics, and plastics is
captured.
Pulling force: The peak value of the cans, etc. when pulled open.
Pull-out strength: Tensile strength test of the terminal.
Bending force: Determination of bending force of metal and
non-metal materials such as sheets, plates, round bars, and wood.
Peeling force: peeling measurement of tape, PCB, adhesive tape,
etc.
Extension: tensile testing of new materials such as rubber.
Hardness: Test for cockroaches, fruits, lipsticks, etc.
Breaking force: The tensile force of wires, copper wires, etc. is
broken.
Switch pull power: the contact force of the mechanical contact,
pull power test.
Basic functions
Three test orders: Kgf, N, Lbf can be switched and automatically
converted.
Four-digit LCD large display can be flipped display: four-digit LCD
large display, display screen can be flipped to display for easy
reading, the device is on the vertical and horizontal test bench,
and there is backlight display.
Peak hold function: The peak value in the test can be captured or
automatically released.
Auto Shutdown: When the push-pull gauge does not operate for a few
minutes, it automatically shuts down to save less power.