Friction Welding Bimetal Bearing Bushes Based On Steel CuSn10Pb10
Brand Name:TOB Bimetal Bearings
Certification:Bimetal Bush Material CuPb10Sn10、CuPb6Sn6Zn3 CuPb24Sn4...
Minimum Order Quantity:negotiated
Delivery Time:negotiated
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Jiaxing Zhejiang China
Address:
Room 1008, TongLe Business Mansion, JiaXing 314033, ZheJiang, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Friction Welding Bimetal Bearing Bushes Based On Steel CuSn10Pb10
Friction Welding Bimetal Bearings and Bushing based on Steel +CuSn10Pb10
Friction Welding Bimetal Bushing Alloy CuPb10Sn10, Friction Welding Bimetal Bearings, and Bushing based on Steel +CuSn10Pb10
For more than 20 years, our customers in the heavy-duty vehicle industry have continually engaged us to provide long-wearing, high-reliability bimetal bearing bushing products. Learn about our experience by navigating our portfolio examples.
Bimetal Sleeve Bearing Products Precision Precision Parts Welded Joint, Friction Welding Bimetal Bearings and Bushing based on Steel +CuSn10Pb10
Metric Flange Bushing
Friction Welding Bimetal Bearings and Bushing based on Steel +CuSn10Pb10
Steel + Lead Bronze Powder
TOB-301F bimetal bushing is backed with high quality low carbon steel with tin-lead-bronze alloy –CuSn10Pb10 sintered on its surface .It has high fatigue strength ,load capacity and impact strength .This products are widely applied to track roller ,air compressor ,especially replaced the centrifugal casting bimetal bushing for the track roller application .The alloy thickness becomes uniform compare with the centrifugal casting bimetal bushing and save lots of material which make the products cost performance higher .
Tech. Data
| Max.Load | Static | 250N/mm² | Alloy Hardness | HB 60-100 | |
| 140N/mm² | |||||
| Temp | -40℃~+250℃ | ||||
| Coefficient of friction | 0.05~0.12 | ||||
| Max.Speed | Max.Speed | 2.5m/s | Thermal conductivity | 60W(m*k)-1 | |
| Max.PV | Max.PV | 2.8N/mm²*m/s | |||
| Shear strength | Shear strength | 170N/mm² | |||
| Coef.of yhermal exoansion | 14*10-6K-1 | ||||
Bimetal sleeve bushing consists of a high quality low carbon steel backing carring a sintered tin-lead-bronze alloy (CuSn10Pb10) as a sliding layer. In order to improve tribological behavior the
sliding layer can be machined with ball shaped indents to store oil
or grease. In case of corrosive environment the backing can be
copper plated. Products of bimetal bushing series are applied in
operating conditions under medium loads, medium or high running
speeds and high impact loads.Bimetal Bushing is used for wrapped
bushes, thrust washers and bushes in connecting rods of gas
engines, etc.Steel shell backed with a lead bronze lining bearing
material for oil lubricated applications. This material has high load capacity and good fatigue properties. It is widely used in automotive applications such as compressors,
steering gear, power steering, pedal bearings, king-pin bushes,
tailgate pivots, mechanical handling and lifting equipment,
hydraulic motors, agricultural machinery etc.
Physical & Mechanical Properties:
| Items | Value | Unit |
| Maximum Operating Temperature Tmax-greased | 150 | °C |
| Maximum Operating Temperature Tmax-oil lubricated | 250 | °C |
| Minimum Operating Temperature Tmin | -40 | °C |
| Maximum Static Load Psta,max | 300 | N/mm2 |
| Maximum Dynamic Load Pdyn,max | 140 | N/mm2 |
| Maximum Sliding Speed V-greased | 2.5 | N/mm2 * m/s |
| Maximum PV Factor-greased | 2.8 | N/mm2 * m/s |
| Coefficient of friction f-greased | 0.05-0.12 | |
| Coefficient of friction f-oil lubricated | 0.04-0.12 |
Bimetal Plain Bearings SAE792 Steel + CuPb10Sn10 with indents /
Made to Order
High load capacity
Sliding layer can be machined with lubricating grooves and/or with
grease indents
Steel backing can be copper plated
Steel+CuPb10Sn10
Bimetal an external self-lubrication oil hole the designed oil
pockets, grooves and holes are suitable for lubricated application
to improve the PV value.
Bimetal Bearings, the bearing alloy layers include lead bronze,
lead-free bronze and lead-free with solid lubricant for high
performance.
Bimetal bearing is made of high-quality cold-rolled steel plate with CuPb10Sn10 copper-lead alloy sintered on the surface as the bearing surface
material, and various types of oil groove, oil hole or oil hole can
be processed on the surface of the alloy layer according to the
working conditions.
This kind of bearing not only has high fatigue strength, bearing
capacity and impact resistance, but also has good corrosion
resistance, suitable for medium speed under medium load and
occasions with large impact load.
Bimetal Bearings SAE 792 CuPb10Sn10 with indents
| Chemical Composition ( % ) | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
It is made of high quality low-carbon steel, and
withlead-tin-bronze(CuSn6Zn6Pb3 or CuSn10Pb10) alloy surface. Is sintered severaltimes under high temperature
and then stick firmly onto the steel plate. It hashigh fatigue
strength, load capacity and shock resistance. It applies con-rodof
automobile engines, transmission gear-box, construction &
agriculturemachinery etc.
External gear pump Bimetal bearing & motor bushing | Sliding
Bearing Technology Bushing Blocks and Thrust Plates
Gear pump busing & bimetal bearings
Hydraulic external gear pump and motor applications with
performance
Bimetal bearing, is a high-quality cold-rolled steel plate as the
matrix, the surface sintered CuPb10Sn10 copper lead alloy as the bearing surface material, and according
to the working conditions in the alloy layer surface processing of
various types of oil groove, oil hole or oil hole, rolling produced
from the sliding bearing.
This kind of bearing not only has high fatigue strength, bearing
capacity and impact resistance, but also has good corrosion resistance.
Bearing Application Requirements
Pump Bearing Solution
External gear pumps and motors mounted with hydraulic bushing
blocks are widely used in many industries such as construction,
agriculture, automotive and material handling equipment and
chemicals.
These industries seek both to improve the performance and reduce the size and weight of their equipment to meet stricter
environmental and economic constraints.
A gear pump uses the meshing of gears to pump fluid by
displacement. They are one of the most common types of pumps for
hydraulic fluid power applications. Gear pumps are also widely used
in chemical installations to pump high viscosity fluids.
External gear pumps and motors mounted with hydraulic bushing
blocks are widely used in many industries such as construction,
agriculture, automotive and material handling equipment and
chemicals.
What is hydrodynamic Gear Pump Bearing Bushings?
Hydrodynamic Gear Pump Bearing Bushings is a kind of oilless
bearing special designed for Hydrodynamic, External gear pumps and
motors mounted with Hydrodynamic bushing blocks are widely used in
many industries such as construction, agriculture, automotive and
material handling equipment and chemicals.
Detailed Information
Bimetal bearing this product is one of the most powerful bearing
capacity of double alloy bearing, the balance bridge bushing and
gasket of heavy duty vehicle; The moving wheel and supporting wheel
of the bulldozer; Automobile steel sheet bushing, all use this
product. It is a widely used high - load low-speed sliding bearing.bimetal bearing is made of low carbon steel plate
and surface sintered CuPb10Sn10 or cusn6zn6zn6pb3 material.
Characteristics
TOB-30 Bimetallic composite bearings
Steel shell backed with a lead bronze lining bearing material for
oil lubricated applications. This material has high load capacity and good fatigue properties. It is widely used in automotive applications such as
compressors, steering gear, power steering, pedal bearings,
king-pin bushes, tailgate pivots, mechanical handling and lifting
equipment, hydraulic motors, agricultural machinery etc.
Structure
Bimetal bearing with steel backing and bronze overlay
· Particularly suitable for high specific loads with oscillating motion and low frequency
· Applicable in rough operation conditions
· High load capacity, very good resistance to fatigue strength at
higher temperatures
1. Sintered bronze lazer: God wear resistance and excellent load
carrying capacity.
2. Steel backing:Setting the foundation of the bushings,the steel
back provides exceptional stability, load carrying and heat
dissipation characteristics.
Technical Data
Structure And Composition
Steel Backing and Leaded Bronze Overlay
Steel + CuPb10Sn10 with indents
Microsection
| Sliding layer with lubrication indents CuPb10Sn10 with composition approx.: Cu 80 % Pb 10 % Sn 10 % Steel backing |
Typical Applications
This material is recommended to be used under the medium speed and medium load condition with oil or grease
lubricating. It is widely used for motor rod ends, Kingpin bushing,
undercarriage rollers, hydraulic cylinder rod eyes of construction
machines and spherical joint bearings of agricultural machines.
Because this material is with lead, the specific parts are not
allowed to be used according to certain laws or regulations.
BIMETAL BUSHINGS SIZE
Product Tags:
Steel Bimetal Bearing Bushes
Friction Welding Bimetal Bearing Bushes
CuSn10Pb10 Bimetal Bearing Bushes
Friction Welding Bimetal Bearing Bushes Based On Steel CuSn10Pb10
Inquiry Cart
0