Forest isolation firefighting robot
Forest fire robot can realize the opening of fire isolation belt,
broaden fire channels, assist in cleaning the fire site, open up
temporary rescue channel, open raw soil isolation belt, etc. With
the function of professional isolation belt development, such as
tree crushing, cutting, irrigation and weeding, and combustible
vegetation transfer, it can realize 8 Km/h rapid operation at the
fastest. By selecting different functional modules, they can be
applied to the field of forest grassland fire prevention, municipal
road snow removal, engineering rescue and relief.
Forest fire control robot in addition to used for forest grassland
fire prevention, can also according to customer demand with a
variety of special machines, such as milling machine, deicing, snow
shovel, snow, tree machine, ditch machine, garden soil preparation
rake, scratch grass fork, grader, bucket mixer, floor grinding
machine and other mature machinery, application areas covering road
maintenance, road snow removal, landscaping, municipal engineering,
industrial construction, etc.
- ★ Multi-functional: fire fighting + opening up forest isolation belt + traction
- ★ High crushing capacity: crushing tree diameter ≥100mm
- ★ High traction: traction (KN) 23 kN
- ★ High mobility: maximum driving speed is ≥10km/h, climbing Angle ≥55°
- ★ High Integration Detective:It can monitor the gas concentration of the surrounding dangerous
environment, with 14 gas types and 2 environmental parameters,
including CO2, CH4, CO, H2S, CL2, NH3, O2, H2, SO2, NO22, C3H8,
C2H4O, C2H2, VOC, temperature and humidity environment parameters.
- High quality images: There are 2 cameras + 360° PTZ installed, and the remote control
can display 360°images around the robot
- ★ Modular expansion system: Reserve uHV output interface, output hydraulic parameters: 72MPa
uHV output; uHV flow 0.7 L/min; low voltage flow 4 L/min; two can
be connected to expanded hydraulic disc saw, uHV breaking tools,
hydraulic generator and other tools
3.1 Host specs
- Basic functions: can open up forest fire isolation belt, can carry
remote fire extinguishing water gun unit, can expand a variety of
tools (such as hook, mowing, shovel, load frame, etc.), high
integrated gas detection system, external expansion hydraulic disc
saw, ultra-high voltage demolition tools, hydraulic generator and
other tools;
- Implementation of fire protection industry standards: GA 892.1-2010
Fire Engine Body-Part 1 General Technical Conditions
- Protection level: body protection level IP65
- Overall dimension (excluding functional module): L*W*H
2000*1400*1200mm
- Overall size (including isolation belt opening machine module):
L*W*H 2800*1400*1200mm
- ★ Weight: ≤3000kg
- Driving speed: ≥10km/h
- Operation form speed: 8 km/h
- Overall traction force (KN): ≥23kN
- Maximum diameter of crushed tree: ≥100mm
- Power: Diesel engine, 30 kW
- Diesel fuel tank: 28L
- Continuous working hours: 8h
- Leaving corner: 27
- Ground clearance: 180mm
- ★ Climbing ability: 55 degrees
- Crossing the barrier height: 800mm
- Slip stabilization angle: 40 degrees
- ★ Water-wading depth: 500mm
- Reliability working time: through 16 hours of continuous stability
and reliability test
- Remote control distance: 1000m
- Video transmission distance: 1,000 m
- ★ Panoramic monitoring: it can remotely display the 360-degree
images around the car body
- The equipment control panel is equipped with a 4.3-inch display
screen to display the diesel oil level, hydraulic oil level, oil
pressure, water temperature, voltage and other parameters.
- ★ Attitude display function: real-time detection of the car body
elevation Angle, roll Angle, azimuth Angle, easy for the operator
to grasp the state of the car body in real time, at the same time
back to the remote control end, so that the remote control
operation real-time to understand the posture of the car body, do
correct operation.
- Car body crawler: fire truck body shall use flame retardant
anti-static high temperature rubber; crawler inside is metal
skeleton; with crawler anti-derailment protection design;
3.2 Isolation belt opening machine
- All kinds of surface vegetation can be quickly crushed and buried
by topsoil, which is suitable for the development of fire isolation
zone and all kinds of temporary channels, with extremely high
efficiency.
- Operation width: ≥1.4m, wedge-shaped knife teeth can quickly crush
branches and weeds, digging and milling trees, topsoil filling, etc
- Crushing performance: the diameter of crushed trees is ≥100mm, The
diameter of the trees that can be crushed in continuous crushing is
≥40mm, and the height of crushed trees, shrubs and grass is not
limited.
- Operating speed: the speed of building fire barrier in low shrubs
or grass is ≥8000m/h, and the speed of building fire barrier in
dense woods is ≥300m/h, depending on the working environment.
- Maximum lifting operation height: 1000mm
- Maximum topsoil filling depth: ≥30mm
3.3 Traction winch
- Traction towing function: the front end of the robot is equipped
with hydraulic winch device and the back end is equipped with
traction ring device, which can be used for rescue and self-rescue
work in complex road areas.
- Winch traction: ≥23KN
- Length of the winch traction rope: ≥15m.
- winch control mode: hydraulic power source drive, electric control.
3.4 Bucket module (optional)
- Can transfer all kinds of materials, open up the rescue channel,
etc.
- Weight: 220kg.
- Working load: 1,200 kg.
- Bucket capacity:≥0.5m³
- Bucket width: ≥2030mm
3.5 Crusher (optional)
1. The small landslide rock or damage the road surface concrete and
other solid can be continuously broken to facilitate the subsequent
road cleaning and transportation.
2. Module weight: 250kg
3. Hit frequency: 500-900 BPM
4. Drilling rod diameter: 68mm
5. Working pressure: 11-14MPa
3.6 Pile driver (optional)
1. According to the design location, the steel pile, wooden pile
and other accurate into the stratum, piling efficiency is high
2. Module weight: 450kg
3. Pile height: max 2m
4. Hit frequency: 500-900 BPM
5. Working pressure: 11-14MPa
3.7 Snow removal cleaner (optional)
1. For expressways, national roads, provincial roads, urban, rural
roads, airports, docks, squares, scenic roads.
2. Module weight: 450kg
3. Working width: ≥2135mm
4. Length: 1,780 mm
5. Width: 2,450 mm
3.8 De-icing cleaner (optional)
1. The disc is used to quickly remove the hard snow and icy areas
on the ground to provide road safety guarantee.
2. Module weight: 200kg
3. Disdisc diameter: 560mm
3.9 Fire extinguishing system (optional)
1. Type of fire-extinguishing agent: water or foam
2. Material: gun body-stainless steel, gun head-aluminum alloy hard
oxidation
3. Working pressure (Mpa): 1.0~1.2 (Mpa)
4. Jet mode: DC and atomization, continuously adjustable
5. ★ Water / foam flow rate: 80 L/s water, 75 L/s foam
6. Range (m): 85m, water; 80, foam
7. ★ Rotation angle: horizontal -145°~ 145°, vertical -10°~ 90°
8. Maximum spray angle: 120°
9. Foam gun tube: foam tube can be replaced, the replacement mode
is fast plug, fire water cannon can spray water, foam and mixture,
do multiple shots, and switch between DC and spray mode
10. Waterproof belt knot function (optional): through the double universal structure, can rotate 360 degrees,
to prevent the water belt knots
11. Automatic shedding function (optional): remote control operation to achieve automatic shedding, to
ensure that the car body can return lightly after completing the
task.