Add to Cart
2.1 Application areas: areas with severe toxic epidemics |
Chassis parameters
4.1 Product Features: |
5 Remote contorl specification
5.1 Size: 230mm × 155mm × 135mm |
6.1 Robot body starts:
Step 1: As shown in the figure 1 (power switch), switch to the ON
position, the power indicator light is on, you can operate the
second step;
Step 2: Pull out the 2 (emergency stop switch) as shown in the
figure, the car body has no abnormal movements, and the signal
indicator flashes before performing the second step;
Step 3: operate as shown in Figure 3 (walking operation joystick).
This joystick is a dual-axis omnidirectional joystick, which can
directly control operations such as forward, backward, turn left,
turn right;
8.1 Transportation requirements: If the robot runs out of power and needs to be transported if it cannot be driven, a forklift can be used. The position of the forklift can be lifted from the front of the robot for transportation. It is strictly forbidden to infiltrate the hand or pull the track during the transportation. At the same time, make sure that the power switch is off before moving.
9.1 One disinfection and epidemic prevention robot
9.2 Car body charger
9.3 A remote control charger
9.4 A remote control (including charger and antenna)