Ultrasonic Cleaning Audi Electronic Ignition Coil High Temperature Endurance

Audi Electronic Ignition Coil A4 A6 A8 1.8T 2.0L 3.0L (2001-2009) 06C 905 115 A

1 , Oe Number Or Part Number

06C 905 115 A / 06C 905 115 B / 06C 905 115 D / 06C 905 115 E / 06C 905 115 F / 06C 905 115 G / 06C 905 115 H / 06C 905 115 K / 06C 905 115 L / 06C 905 115 M / 0 986 221 053 / GN10206-12B1

2 , Fit Model

3 , Testing And Warranty

4 , Single cylinder independent ignition system

Single-cylinder independent ignition system, compared to the traditional ignition system, although the increase in the number of ignition coil, but eliminates the need for high-voltage lines, reducing the energy loss caused by high voltage transmission, making the spark plug to the ignition energy greater. In terms of reliability, single-cylinder independent ignition is better than the traditional sub-cylinder ignition. For the traditional ignition system, once the ignition coil problems, the entire ignition system will be paralyzed, the engine will not work, if the road on the situation can only find a trailer. In the single-cylinder independent ignition system, an ignition coil problem will only affect it is responsible for the cylinder, the other cylinder ignition will not be affected. Although the engine work will be very unstable, power will be a sharp decline, but the engine is still able to run, the car can still open. If not far away from the service station, by the vehicle itself is still able to open to the maintenance station. From the point of view of electronic interference, single-cylinder independent ignition also has obvious advantages. In order to reduce this interference, engineers will use a lot of material to shield, which is what we see high-voltage lines, especially high-quality high-voltage lines (high-voltage lines), high-voltage high-voltage lines Are unusually coarse one of the reasons. Single-cylinder independent ignition system is clearly not the trouble, it is in the wire current is low-voltage transmission, this 12V voltage generated by the electromagnetic interference is minimal. Also from the anti-interference aspects, is the same. The place where the electromagnetic radiation is generated by the car is more than the ignition system, and there is interference from the outside world. These disturbances pass through the high voltage line and affect the ignition system. Obviously single-cylinder independent ignition there is no such problem.

5 , Production Process

Raw materials - processing - ultrasonic cleaning - high-speed winding copper - automatic solder - assembly -100% detection - preheating - potting epoxy - open test - testing - reassembly -100% test - packaging - shipping

Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.