Standard Size Jaguar Ignition Coil Replacement High Silicon Steel Sheet

Engine Ignition Coil Jaguar S-Type X-Type XF XJ (1999-) 2.5L 3.0L C2S42673

Advantage

1, the product shell with high quality plastic raw materials PBT, with flame retardant, and epoxy resin a high degree of adhesion, high voltage resistance, can withstand -45 ° - +125 ° impact.

2, the product of the secondary skeleton using imported raw materials PPO, with a high degree of resistance to voltage, flame retardant, to withstand 200 ° high temperature.

3, ignition module using high-quality electronic components, with anti-electromagnetic interference, high and low temperature impact. Good electrical conductivity.

4, silicon steel sheet using China's largest manufacturer of steel production of high content of silicon, with a good amount of magnetic permeability, high conversion rate, long magnetic retention time.

Product Description

1 , Model No : DQG1414

2 , OE NO / (Part number) : 6R83-12A366-BA / C2S11480 / C2S42673 / C2S7928 / GN10327-12B1 / 099700-0620

3 , Test capability : Open-Current Test,OK / Thermal Shock,OK / Salt Spray Test ,OK / High Temperature Endurance(800 hours),OK.

4 , Power : Powerfull ignition energy and High voltage

5 , Inspection : 100% inspection

6 , warranty : 1 Year / 50000 km

Fit Model

About Ignition Coil

An ignition coil (also called a spark coil) is an induction coil in an automobile's ignition system which transforms the battery's low voltage to the thousands of volts needed to create an electric spark in the spark plugs to ignite the fuel. Some coils have an internal resistor while others rely on a resistor wire or an external resistor to limit the current flowing into the coil from the car's 12 volt supply. The core components of ignition system is ignition coil and switch device.
Ignition coil in accordance with the magnetic type magnetic circuit is divided into open and closed magnetic type. Traditional ignition coil with magnet, with its core in silicon steel sheet pile into around 0.3 mm, core around with secondary and primary coil.Closed magnetic type, the use of the shape of Ⅲ core around the primary coil, and then around the secondary coil, the magnetic field lines composed closed magnetic circuit core.Closed magnetic type ignition coil has the advantage of low magnetic leakage, small power loss, small size, so the electronic ignition system widely used magnetic closed type ignition coil.

FAQ (Fluently Asked Questions)

Q1. If we don't find the model type here, Please tell us.

1, Please send us your OEM number.

2, Please send us your photo and products size if you have.

3, Please tell us your exact car model if you do not have photo or OEM number.

Q2. Do you test all your goods before delivery?
1, Yes, we have 100% test before delivery.

Q3. What is your terms of payment?
1, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q4. I want to buy your products, how can I pay?

1, Through bank transfer,we'll show the account information on PI.

2, Others:We can make specifications according to customer's requirement.

Q5. How to contract us?

1, If you need more information, please contact us freely,Please sending us your inquiry to our e-mail.

2, If you have urgent things to contact me, please call my phone.

3, Of course you can also use chat software.

Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.