China Categories
English
Home /Cleaning Equipments /

Low Pressure Water Spray Nozzles Cleaning UYS - B Full Cone Spray Nozzle

Low Pressure Water Spray Nozzles Cleaning UYS - B Full Cone Spray Nozzle

Brand Name:Ucloud
Certification:CE
Model Number:UYS-B
Minimum Order Quantity:2 pces
Delivery Time:3 to 7 days for sample order, 14 to 21 days for bulk order
Payment Terms:T/T, L/C, Western Union, MoneyGram
Contact Now

Add to Cart

Active Member
Location: Qingdao Shandong China
Address: Building B1, Block B, Qingdao Industrial Technology Research Institute, No.17 Songyuan Road, Qingdao High Tech Zone,Qingdao,China
Supplier`s last login times: within 29 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Dust Control Low Pressure fog misting system with Long Distance Large Angle Quick Jet Full Cone Spray Jet


Dust Control Low Pressure fog misting system with Long Distance Large Angle Quick Jet Full Cone Spray Jet


Intelligent Control Mode, easy to operate and in high safety.

  • Touch screen, easy to operate.
  • Separate humidity control pipe for each area.
  • With a Humidity & Temperature database, can support for printing
  • High pressure, low pressure, Water leakage, power leakage Shutdown protection.
  • Multi-modes way of control.

High efficiency, low cost, Low Noise

  • To atomize 1L water per hour only need 4W power.
  • Noise ≤65Db
  • Separate power supply,separate control,timing switch
  • Independent parameter setting, maintenance prompt, fault record


1, UYS-B Working Principle:


According to the siphon principle, a reasonable geometric surface structure is used at the nozzle outlet. The compressed air is ejected from the nozzle gas outlet at a high speed, and a negative pressure zone is formed around the outlet of the waterway. Since the pressure in the line and the pressure at the outlet of the nozzle water supply are poor, the water in the pipe is attracted to the nozzle outlet Where the water and compressed air are sprayed at a certain ratio at the nozzle outlet. Due to the turbulence of the jet and the aerodynamic action of the surrounding gas, the water flow is deformed, especially under the action of the pneumatic pressure and the surface tension, so that the water surface deformation is increasing, so that the water flow splits, the formation of water mist or unstable water droplets, Large water droplets are gradually broken into small water droplets or water mist.​


Dust Control Low Pressure fog misting system with Long Distance Large Angle Quick Jet Full Cone Spray Jet


Automatic Spray-Gun UYS-B


Make It Smarter Operation with Automated Spray Technology!


Low Pressure solid wide angle cone jet spray nozzle for ESD prevention in electronics factory


Original spraying systems are made-up with nozzle, pumps, sensors and other hydraulic and pneumatic
devices. Automated spray control can range from simple on/off control of automatic nozzles to sophisticated
real-time monitoring of process variables and automatic adjustment, including PWM and frequency control.

We provide turkey system (spray solution) to our customers, spray solution includes:
- Precise coating solution
- Humidifying solution
- Tank washing solution
- Blowing Air solution
- High pressure cleaning solution
- Dust Control solution
- De-Sox & De-Nox solution
- Etc.


Dust Control Low Pressure fog misting system with Long Distance Large Angle Quick Jet Full Cone Spray Jet


Dust Control Low Pressure fog misting system with Long Distance Large Angle Quick Jet Full Cone Spray Jet


2,UYS-B Spraying System Working Principle

The spraying system is composed of several UYS-B spray guns, main controller, auxiliary controller, water vapor control, water vapor distribution and so on. The compressed air is discharged from the nozzle through the air pressure regulating valve, and the pneumatic piston in the nozzle is pushed to move the needle valve backward and the water outlet is opened. The jet of compressed air jet at the nozzle outlet produces a vacuum negative pressure at the outlet of the waterway. The negative pressure at the outlet of the nozzle water is piped to the bottom of the diaphragm in the vacuum proportional control valve. The diaphragm drives the stem in the vacuum proportional control valve to move downward and opens the waterway. While compressed air to open the pneumatic switch valve. Water through the pneumatic switch valve, pressure regulator, vacuum proportional control valve, was sucked to the nozzle of the water outlet. In the nozzle at the exit and mixed with compressed air after the formation of water mist.


Stainless Steel Low Pressure Water Spray Misting nozzles greenhouse misting system


3, UYS-B Main Features:

  • Large Spray Volume:The maximum humidification capacity of single atomization nozzle is 7L / h, which is suitable for the full humidification of different spaces.
  • Fine mist, High efficiency:Average particle size from 5 to10μm, 100% atomization rate.
  • High reliability:Nozzle structure using pneumatic needle valve to control water on and off status. No matter the system start or stop, there will be no water dripping phenomenon.
  • Automatic-cleaning function:Spray Nozzle with automatic cleaning function, less maintenance work. Even in different conditions of use, can also ensure the perfect function.
  • Low operating costs:This system can be applied to different water quality, reduce the maintenance workload, save operating costs.
  • Eco-friendly:The compressed air that conveys the mist comes from the compression cycle. The temperature of the bacteria can not survive. Although the water that is not atomized but not absorbed by the air will never be atomized again, the system automatically activates the nozzle emptying cycle at the end of each humidification. The compressed air will thoroughly blow off the parts in contact with the air / water, thus eliminating the conditions for accidental contamination of the microorganisms.
  • Long service time: Use the high-quality stainless steel in precision machining for the gun processing to ensure long service life.

4,UYS-B Technical Parameters:

Model No.CF-SWater Quality

Drinking water

or deionized water

Power/VoltageAC220V/50HZ 30WWater Pressure0.1-0.3MPA
Spray Volume7kg/h/nozzleNozzle ModelCF-1
Max. Volume140kg/hNozzle Specs.110mm×32mm×32mm
Air consumption56L/min/nozzle400mm×320mm×200mm
Air QualitySuitable for breathing or non-corrosiveCompressed Air0.5-1.0MPA

Stainless Steel Low Pressure Water Spray Misting nozzles greenhouse misting system

Main Benefits:
1- Cleaner and safer work environment
2- Reduced use of energy, water and chemicals.
3- Improve product and process quality.
4- Save human resource.

Ucloud gas-water mixing spray gun is composed of atomizing nozzle, control system and filter sterilization annex and other components. UYS-B spray gun with automatic clearance of the outlet scale and dust, the pneumatic needle valve with water-drip prevent function. Under the control of the intelligent control, it can control the the flow rate of the compressed air and thus control the reciprocating movement of the pneumatic needle valve. By this, the needle will clean the water scale and dust. When the control in the working status it has the cleaning function. When the compressed air is off or the pressure is lower than 0.2 Mpa, the needle will seal the water outlet part, and no water will come out. It can keep the large humidification and also assure the spray performance of the average droplets 5-10μm.


Low Pressure solid wide angle cone jet spray nozzle for ESD prevention in electronics factory

==================================================================================

FAQ:

Q1. How To Order ?


Step 1 : Send an inquiry
Step 2 : Confirm the operating conditions
Step 3 : product recommendation and quotation
Step 4 : sampling
Step 5 : confirm order details and make a payment
Step 6 : proceed with product preparation upon receipt of payment
Step 7 : shipping


Q2. How To Pay ?


We accept the following payment methods
1. T/T (Bank Transfer)
2. Western Union
3. Paypal


Q3. How Do We Deliver ?


1. We ship products through major carriers like FedEx, UPS, TNT, EMS.
2. Sea shipment service available. (MOQ 1CBM)


Q4. What's The Lead-time ?

Lead-Time Chart
QUANTITY ( PCS )Lead-Time
1003 Working days
1,0007 Working days
3,00010 Working days
5,00015 Working days
10,00020 Working days



Q5. How Long Does It Take To Receive Shipment ?


It depends on where the buyer is located and which service is chosen.

Guidelines delivery times:
1. Priority Express (FedEx, UPS, TNT) : 1 ~ 3 working days
2. Economy (FedEx, UPS, TNT, EMS) : 3 ~ 9 working days



Q6. How To Track The Shipment ?


On the day we dispatch the shipment we will send a shipment notice
which includes the tracking number.


Q7. What Are Our Product Warranty Policies?


We provide a 12 month guarantee.
During the guarantee period we will replace defective goods and/or spare parts at our own expense,
only if the responsibility is solid confirmed as ours after investigation and discussion agreed by both

sides.


Q8. Why Choose Ucloud high pressure water misting Nozzle ?


We've been devoting ourselves to nozzle manufacturing for more than 30 years,
and have been working with top-notch customers from countries including Japan and many in Europe and North America.
We enjoy a good reputation among existing customers for outstanding stability
resulting from strict and consistent quality checks and production controls.
We trust we're fully capable of satisfying your high-end requirements and meeting your high standards.

Q9. How to contact with us ?


Email: 18669741981@gmail.com
Tel (What's App): 0086-18669741981
Skype: qingdaosjm0319




China Low Pressure Water Spray Nozzles Cleaning UYS - B Full Cone Spray Nozzle supplier

Low Pressure Water Spray Nozzles Cleaning UYS - B Full Cone Spray Nozzle

Inquiry Cart 0