Sand Trap Louver Blade Roll Making Production Machine Shutter Roll Forming Machine

VCD FRAME ROLL FORMING MACHINE

Content:

1 - Work piece diagram

2 - Machine Layout

3 - Technical Specification

4 - Machine and work piece photo

Workpiece Diagram:

Material:G.I or Stainless steel

Thickness:G.I 1.0 - 1.6 mm

S.S 0.8 - 1.2 mm

Raw Material width:228 - 231 mm
Machine Layout:

Technical Specification

1.Equipment technique requirement:

1.1.Equipment floor space:23×3.0×2.5(L×W×H)meter

1.1.2 Equipment feeding material the orientation:The left side enters and right leave

1.1.3 Voltage:380V, 50Hz, and 3phase

1.1.4 hydraulic oil:NO.46#

1.1.5Gear oil:18# Hypoid gear oil

2.Equipment main technical parameters:

2.1 Raw material width:Around 231 mm

2.2 material thickness:1.0~1.6mm

2.3 Material:Stainless steel:0.8~1.2mm;Galvanized sheet:1.0~1.6mm

2.4 Production speed:Around 6M/min

2.4 Production length:≥4000mm

2.5 Equipment total installed capacity:Around 25KW

3.1 De-coiler

Material width:≤250 mm;Material thickness≤2.0mm;Inner diameter:480-520 mm;

Outer diameter:Φ1200mm;Max.Load capacity:≤2T

3.2 Servo feeding system (BNC-30)

BNC-30 Technical parameters:

• The feed shaft diameter:Φ60mm
• Measuring diameter of shaft:Φ60mm
• Maximum feed plate of width:≤300mm
• Maximum feed plate of thickness:≤3.5mm
• Maximum feed speed:≤40m/min.
• Feeding and blanking step length tolerance:±0.20mm,
• Feed products overall length tolerance:±0.25mm,
• Servo motor power/brand:1.8KW/ Japan Yaskawa.
• Transmission:Synchronous wheel / gear
• Length measuring encoder:ROUNDSS 2500P

3.3 Notching, punching hole and cutting

Structure:Hydraulic punching structure, the welded steel frame, has good inflexibility

First notching dies:2 sets

First punching die:1 setAfter forming notching dies:2 sets

After forming cutting die:1set3.4 Main rollforming machine

• Forming steps:16 group
• Forming profile channel
• Forming framework:Use the wall type side plate, gear drive.
• Side wall thickness:35mm
• Max material width:≤231mm
• Min material thickness:1.6mm
• The roll shaft diameter:Φ48 mm
• Roller material:Cr12MoV.
• The quenching hardness:HRC58-62°
• Use of double bearing design, bearing type 6208
• The main drive motor uses 11kw frequency conversion motor.
• 
  

3.5 Cutting system

A.Modality:Hydraulic cutting system

B.Design feature:Cutting machine designed to be after roll forming, the cutting length and number of pcs can be set by using PLC.

3.6 Run-out table

Framework:Platform type,without power

3.7 Electrical control system

3.7.1 The whole line adopts PLC control, LCD touch screen display, man-machine interface.Interaction between workers and PLC.

The operator can do theprogram setting of the PLC, modify the control parameters and monitor the control process of the production line and the running state real-time monitoring equipment, operation parameters and fault indication.The length of the work piece digital setting, the length of the work piece can be adjusted.

3.7.2 Mode of operation:Manual / automatic.

In manual mode, automatic switching function should be in the manual mode,

The machine will be in stand-alone operation for testing and repairing work.

In automatic mode, all production and operation, the start up sequence;Along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel.

JIANGYIN BOSJ SCIENCE & TECHNOLOGY CO., LTD located in the Yangtz e Rive r Delta and the famous "China's first village" Jiangyin Huaxi Village. It is a professional manufacturer specializing in the developing and export of roll forming machine for metal roof tiles, wall sheets, C-shaped puline, Z-shaped purline, press brakes, highway guardrail and CNC plasma cutting machine. BOSJ has developed machinery and production methods to meet customers' increasing demand for profitability and new business opportunities.

BOSJ has a group of experienced senior engineers, technicians, they were from machinery, automatic control, power electronics, and other fields, and skilled workers ensure high quality products for customers with perfect quality management and testing systems. We're always able to meet your customized needs. From basic economical roll formers to the most complex, we fashion a solution to meet your company's production goals and budgets.

In line with enterprising spirit on 'sincerity originally" company, use CAD/CAM electromechanics integrated technology, in a conscientious and down-to-earth manner to devoted to new product new industrial research and development of new technology, it is accurate to regard time of fighting in time of price that the high-quality products are reasonable as, loyal service is very domestic and international every user.

Our products cover more than 20 provinces and cities in China and are also exported to Southeast Asia, the Middle East, African regions and North America.