Product Details
Power Tap IEC Approved by CE Power Strips , 6Way Extension Socket ,
Metal PDU with Overload protector
Key Specifications/Special Features:
- Voltage compatibility: 250VAC
- Output:
- Frequency compatibility: 50/60 Hz
- Output watts: 2,400
- Output volt amp capacity (amps): 16A,10A, 13A
- Outlet quantity/type: 6 way
- Input:
- Recommended electrical service: 16A,13A,10A,15A; 250V
- Input plug features: IEC C-13
- Input cord length (ft.): 5 to 25FT
- Input cord gauge, type 1.5mm2 x 3
- LAMP alarms and switches:
- Switches lighted 2 position switch controls power to all outlets
- Locking switch cover transparent on/off switch cover prevents
accidental turn-off
- Material of construction: aluminum
- Mounting accessories included Includes mounting clips
- Receptacle color: black
- AC line cord color: black
- Form factors supported: supports vertical or horizontal mounting in
rack enclosures, raceways and a variety of other applications
- Certificate: CE
OUTPUT |
Frequency compatibility | 50/60Hz |
Output watts | 2400W |
Output volt amp capacity (amps) | 10A 13A 15A 16A |
Outlet quantity / type | 6*IEC320 C13 |
Outlet spacing | any in. |
INPUT |
Recommended Electrical Service | 15A 125V/13A 250V/16A 250V/10A 240V |
Input connection type | IEC 320 C14 |
Input plug features | Black or other |
Input cord length (ft.) | 5 to 25 |
Input Housing length (in) | 12-1/4 to 72 |
Input cord gauge, type | 14AWG/3 SJT |
Voltage compatibility (VAC) | 125 |
LAMP ALARMS & SWITCHES |
Rock Switches with circuit breaker and lamp | Lighted 2 position switch controls power to all outlets |
Locking switch cover | Transparent on/off switch cover prevents accidental turn-off |
PHYSICAL |
Unit Dimensions (HWL/mm) | 32*60*L/34*43*L |
Material of construction | Aluminum |
Mounting accessories included | Includes mounting clips |
Receptacle Color | Black or other |
AC line cord color | Black or other |
Form factors supported | Supports vertical or horizontal mounting in rack enclosures,
raceways, laptops cat and a variety of other applications |
CERTIFICATIONS |
Power Tap | IEC |
Approved by | CE |
INSTALLATION GUIDE:
Before installation, you may need to get a IEC C13 Outlet. Decide
your wire gauge, and ask store attendant for assistance what color
of connectors you should get) from your local hardware or electric
supply or home improvement stores.
Minimum tools required: A fine to medium fine philips screw driver,
and a pair of scissors, and a pair of mid size slip joint pliers
1. Turn off electricity in the house
2. Decide where to place this unit
3. Choose the side you want the cord exit to choose IEC C14 Built
in power strips
4. Match the color of the wires and secure the wire connection with
proper wire connectors built in IEC C13 plug.(different wire gauge use different colored wire connectors)
- Mount the power strip where you want it to be:
A) For power strips with mounting tabs on both ends: screw down the
unit on the floor, wall or in your cabinet or on your rack, where
you want it to be
B) For power strips without mounting tabs, but to be mounted with
clips, place the unit where you want it to be first, make marks
where to install the clips, which normally should be placed about
min 2”<power strips length away from each end, and then screw
the clips down with screws provided. Then, snap the power strip in
on the clips - Push IEC C13 outlet plug into IEC C13 inlet power strips , and push
switch to ON. Turn electricity back on, you are ready to go.
Note:
We also custom manufacture for our customers.
Company Profile
Jiashan Dingsheng Electric Co., Ltd. is Located at Jiashan, which is at the north end of the first
cross-sea bridge in the world and combination of
Jiangsu,ZhejiangandShanghai. This area develops fastest in the east
ofChinaand has most convenient transporta -tion (It is80 kmfar
fromShanghai,110 kmfromHangzhouand100 kmfromSuzhou). Sheng feng has
been devoted to develop, design and produces: switches, socket,
Power strips, Push to open (push to exit) etc for electrical
appliance manufacturer, and using in rack mount, raceway, laptops
cart and workbench applications etc.
( Our products are exported to developed countries in Europe
andAmericadirectly or indirectly. We could develop new products
accord to the functional requirement and assembly requirement or
drawings of clients for special products.)
The company has mainly become to develop and produce special or
replace imported products for clients. The products has won trust
and affirmation of many clients, got ISO9001 and UL, c-UL, ITS-BS,
RCM ,CE certificate and is applying other international
certificates such as TUV , and self-export rights. We will make
efforts as usual to improve products, ensure the quality of
products and make products more excellent. Our service aim is to
become pioneer of market with pragmatic business style, concept of
integrity services, and on the base of scientific and technological
innovations. We are willing to cooperate closely with various
vendors at home and abroad, seek common development and advance
with the times. Welcome you to visit our factory and supply your
advice.
You can find a product with best price and quality here.