Building Material Microscale Combustion Calorimeter BS EN 746-2 ASTM D7309

Building Material Microscale Combustion Calorimeter BS EN 746-2, ASTM D7309

Introduction:

It can determine the basic thermo-chemical data, such as Specific Heat Release rate, combustion calorific, Ignition Temperature, by testing very little specimen (1-10mg) in a few seconds, and predict the combustion retardant characteristics of the tested material.

Standards:

ASTM D7309-2007;

EMC 89/336/EEC;

LVD 72/23/EEC;

BS EN 60204-1, BS EN 746-2;

Features:

1. Anaerobic and aerobic pyrolysis;

2. Fast test speed, convenient for determine, it can finish the testing within several minutes;

3. High precise MFC(Mass Flow Controller) to control O2 and O2 flow: measurement range 20-200cm3/min;Response time less than 0.1S, accuracy: F.S±1%;

4. O2 sensor measurement range:0-100%, T90<6S, ±0.1%, accuracy: F.S±1%;

5. There is temperature sensor under the sample cup;

6. Automatically remove the sample cup into the combustion furnace;

7. Combustion furnace: Programmable control the heating temperature to specified temperature, swift of the temperature below 5K/h, with over-temperature protection function;

8. Temperature range: Room temperature-1000ºC; imported heating wire; high performance kanthal A-1 heating element;

9. With multiple cooling devices which is convenient for thermal dissipation;

10. LABVIEW software, PC and printer are optional, the software has following functions:

Display the running status of the equipment;

Calibrate the equipment and store calibration results;

Collect testing data;

Calculate heat release rate(W/g), combustion calorific(J/g), Ignition Temperature(°C);

Specifications:

Specimen size: 1-10mg, (typical specimen quality is 2-5mg), supply with precise balance with measurement range of 42g, 0.01mg.

Size: H:1570*W343*D663mm

Specimen heating speed: 0-2K/S

N2: 99.5% purity, pressure: 20 - 25 PSI

O2: 99.5% purity, pressure: 20 - 25 PSI

YUYANG INDUSTRIAL CO., LIMITED (DONGGUAN YUYANG INSTRUMENT CO.,LTD) is Located in Wangjiang District (Dongguan City ,Guangdong Province, China),a famous historical town with prosperous industry and convenient transportation.

We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.

Decades of research and development strengthen the leading edge of YUYANG in this field, and established as an crucial role in R&D on high quality and high-cost performance of testing equipment. YUYANG’s testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, lithium battery, LED, photoelectricity, mobile, plastic and rubber, display, telecommunication, chemical industry, aerospace, building material and product, wire and cable, toys, furniture, textile and fabrix, etc. All YUYANG testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.

YUYANG INDUSTRIAL CO., LIMITED (DONGGUAN YUYANG INSTRUMENT CO.,LTD) looks forward to cooperating with customer all over the world.

If you are interested in any of our products or would like to discuss a custom order. Please feel free to contact us. We are looking forward to forming succesful business with new clients around the world in the near future.