Low Resistance USB 86" Projected Capacitive Touch Screen
Brand Name:Touch China
Certification:CE,ROHS
Model Number:ZCC-7820V2
Minimum Order Quantity:Negotiable
Delivery Time:25 working days
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
B905, Building 1, Chuangxin ZhihuiGang, No.155, Hongtian Road, Shajing Xinqiao street, Baoan District, Shenzhen 518103
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Low Resistance USB 86" Projected Capacitive Touch Screen
86" PCAP Touch Panel with SP-ITO film with Low Resistance High Stability
Introduction of SP-ITO Touch Screen
SP- ITO is a thin film material that can conduct electricity and
behave as optically transparent. It is an extremely important
optoelectronic material. It is widely used in P- cap Touch Panel,
Smart Touch Window, EMI touhch products etc.
SP-ITO flexible nano transparent conductive material uses magnetron
sputtering process, which effectively improves the stability and
cost advantage of the product. It is completely different from ITO,
metal mesh, and nano silver wire, and has a greater cost-effective
advantage.
Basic specification of PCAP
| Size | 86 inch |
| Total thickness | 6.5±0.5mm |
| Outline of Cover Lens | 1994*1173 +0/-1mm |
| Outline of ITO film Sensor | 1950.64*1113.05 ±0.5mm |
| Viewing Area | 1896.64*1067.56 ±0.5 mm |
| Active Area | 1899.64*1070.56±0.5 mm |
| Interface | USB |
| Input voltage | DC5V |
| Response time | 10ms |
| Report rate | 100 HZ |
| Input method | Hand writing or capacitive pen |
| Transmittance | ≥85% |
| Package list | 75 inch Touch panel,controller board and USB cable |
| AG Haze Degree | 6±2 |
Reliable Testing of GFF Touch Panel:
| Working temperature and humidity | -20~+60℃, 20~85%RH |
| Storage temperature and humidity | -30~+ 65℃, 20~85% RH |
| Humidity resistance | 85% RH, 120H |
| Heat resistance | 60℃, 120H |
| Cold resistance | -20℃, 120H |
| Thermal shock | -20 ℃ (0 . 5hour)-70 ℃ (0 . 5hour) by 50 cycles |
| Humidity resistance | The requirement shall be satisfied after being exposed at 85% RH
for 120 hours and normal temperature and humidity for 24 hours. |
| Heat resistance | The requirement shall be satisfied after being exposed at 65℃ for
120 hours and at normal temperature and humidity for 24 hours. |
| Cold resistance | The requirement shall be satisfied after being exposed a t -30℃ for
120 hours and at normal temperature and humidity for 24 hours. |
| Thermal shock | The requirement shall be satisfied after being exposed at -30℃ (0.5 hour)—60℃(0.5hour)by 50 cycles and at normal temperature for 24 hours |
| Slide Test | 250g, 20mm, 100,000 times, Durability test may cause surface slight scratch, yet the function stays intact. |
| Hitting life | 35,000,000 times, Durability test may cause surface slight scratch, yet the function stays intact. |
Application of GFF Capacitive Touch Panel
These products are widely used in Eductaion white board, Interactive Touch Table, Gaming Machine and Conference touch equipment etc.
Advantages of SP-ITO Touch Screen
1. Compared with other materials, SP-ITO has good electrical conductivity, good light transmission, excellent flexibility, high cost performance, good stability, and no moiré issue.
2. Realize process simplification: The new material application process can directly simplify more
than half of the traditional process, and the yield rate is greatly improved.
3. Cost down:
a. The application of new materials can eliminate all silver paste manufacturing processes and reduce the production cost of products.
b. The application of new materials can reduce the investment of production
personnel by more than half compared with the traditional production process.
SP-ITO material parameter
SP-ITO-5 (In development) | Unit | Spec | Test Method |
| Resistance | Ω/□ | 5 | ASTM D 991 |
| Transmittance | % | 84 | ASTM D1003 |
| Haze | % | 0.45 | ASTM D1003 |
| b*(T) | % | 1.6 | ASTM E1164 |
| Uniformity | % | 3.2% | (Max.-min.)/ 2•Ave |
| Adhesion | - | 5B | ASTM D3359 |
| Warping | - | bending radius of 20mm | 125umPET is 100000 times |
| Dyne(HC) | - | 40 | Arco pen 5s |
| SP-ITO-10 | Unit | Spec | Test Method |
| Resistance | Ω/□ | 10 | ASTM D 991 |
| Transmittance | % | 86 | ASTM D1003 |
| Haze | % | 0.42 | ASTM D1003 |
| b*(T) | % | 1.4 | ASTM E1164 |
| Uniformity | % | 2.5% | (Max.-min.)/ 2•Ave |
| Warping | - | bending radius of 20mm | 125umPET is 100000 times |
| Adhesion | - | 5B | ASTM D3359 |
| Dyne(HC) | - | 40 | Arco pen 5s |
SP-ITO FF sensor Reliability test
| Item | Test Condition | Spec | Test request | Check Point | ||||||||
| Before testing | First | Result | Second | Result | Third | Result | Four | result | ||||
| Low temperature | -40℃ | 504H | OK/OK | 0h | 72h | Pass(0F/5) | 144h | Pass(0F/5) | 336h | Pass(0F/5) | 504h | Pass(0F/5) |
| High temperature | 65℃/90%RH | 504H | OK/OK | 0h | 72h | Pass(0F/5) | 144h | Pass(0F/5) | 336h | Pass(0F/5) | 504h | Pass(0F/5) |
| Low and high temperature | -40℃~85℃ | 300cycle | OK/OK | 0cycle | 50cycle | Pass(0F/3) | 100 cycle | Pass(0F/3) | 200 cycle | Pass(0F/3) | 300 cycle | Pass(0F/3) |
| UV testing | 0.35±0.02W/(m2·nm) at340nm | 470h | OK/OK | 0h | 235h | Pass(0F/3) | 470h | Pass(0F/3) | / | /
| / | /
|
| Salt water testing | The whole surface is coated with salt water and placed in a high temperature and high humidity chamber | 168h | OK/OK | 0h | 24h | Pass(0F/5) | 72h | Pass(0F/5) | 168h | Pass(0F/5) | / | / |
86" GFF Touch Screen drawing:
Low Resistance USB 86" Projected Capacitive Touch Screen
Inquiry Cart
0