Add to Cart
Stability Climatic Constant Temperature Humidity Controller , Aging Test Chamber
Temperature and Humidity Test Chamber Basic introduction:
Environmental test chamberr/constant temperature and humidity
chamber simulating product under the condition of temperature and
humidity combination (high and low temperature operation &
storage, temperature cycle, high temperature and high humidity, low
temperature and humidity and condensation test, etc.), check
whether the adaptability and characteristics of the product itself
have changed.
Need to meet the requirements of international standard (IEC, JIS,
GB, MIL...). in order to achieve International quantum measurement
procedures consistency (including test steps, conditions, methods).
To avoid different cognitive, and reduce uncertainly factors scope
of measurement.
Temperature and Humidity Test Chamber Specification:
Model | SMC-1000-CC | SMC-1800-CC | SMC-2520-CC | SMC-3600-CC | |
Temperature | Temperature control range | -70℃~180℃ (A:0℃~180℃;B:-20℃~180℃; C:-40℃~180℃;D:-70℃~180℃) | |||
Temperature fluctuation | ±0.5℃ | ||||
Cooling rate | 180.0℃~-70.0℃ Within 100 mins 1.0~3.0℃/min | ||||
Heating rate | -70.0℃~180.0℃ Within 60 mins 3.0~5.0℃/min | ||||
Temperature uniformity | ±1.5℃ (-40.0℃~100.0℃) | ||||
±2.0℃ (100.1℃~180.0℃or-40.0℃~-70.0℃) | |||||
Humidity | Humidity control range | 10.0%RH~98.0%RH( 60℃ above corresponds to 11%RH ) | |||
Humidity fluctuation | ±1.0% RH | ||||
Humidity uniformity | ±2.0%RH | ||||
Material / components | Internal material | Adopts 1.2mm thickness stainess steel(SUS304) | |||
External material | Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying | ||||
Heat insulating material | 100mm thickness polyurethane plate+10mm thickness mineral wool | ||||
Fan | Centrifugal blower | ||||
Compressor | Fully-closed/ Semi-closed | Semi-closed | Semi-closed | Semi-closed | |
Condenser | Air cooling, water cooling | Air cooling, water cooling | Water cooling | Water cooling | |
Refrigerant | R404A,R23,R508 | ||||
Evaporator | Fin - and - Tube Heat Exchanger | ||||
Heater | Nickel chromium alloy heating wire | ||||
Humidifier | Steam humidifier | ||||
Size | Interior size(mm) W*H*D | 1000*1000*1000 | 1000*1500*1200 | 1200*1500*1400 | 1200*2000*1500 |
Outer size(mm) W*H*D | 1200*1550*2450 | 1200*2000*2650 | 1400*2000*2850 | 1400*2350*2950 | |
Volume(L) | 1000L | 1800L | 2520L | 3600L | |
Power supply | 380V AC 50/60Hz | ||||
Controller | Standard: South Korea TEMI-1500 Optional: South Korea TEMI-2500,South Korea TEMI-2700 |
Sanwood Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established. And has become a private science and technology enterprises in Dongguan,Guangdong Province, which passed the lSO9001:2008 quality system certification.
Having experienced nearly 20 years efforts, we have successfully developed a series of products: High and low temperature test chamber ,, explosion-proof type hot box, explosion-proof type thermal shock chamber, walk-in temperature and humidity chamber, an explosion-proof type temperature test box, rain test chamber, dust test box, weather resistance test chamber, seawater immersion box, Temperature&humidity&Vibration integrated test chamber, battery thermal abuse test box, ozone test box, xenon lamp test chamber, high temperature oven, , vibration table. All of products meet GB31241,IE62133,QCT/743,UN38.3,UL2054 Standard. And we have had a good cooperation with ATL, Sony, Sunwoda, Desay, Samsung, BYD, Toyota, Yutong Bus, Nissan, Guangdong Province entry-exit, Tsinghua University, Henan University, Chinese Academy of Sciences, Central South University Successively.