Product Details
CNW4850L Outdoor Telecom Equipment Cabinets IP55 Outdoor Solar
Power System
Product Description:
Key Feature:
- It adopts full-digital double closed-loop control, combined with
advancedSPWM technology to output pure sine waves.
- Two output modes: mains electricity bypass and inverter output;
uninterrupted power supply.
- Four charging modes: PV Only, Mains Electricity Priority, PV
Priority, and PV&Mains Electricity hybrid charging.
- Advanced MPPT technology with 99.9% effificiency.
- Comes with an LCD display and 3 LED indicators that can clearly
indicate the status and data.
- Power saving mode, reduce no-load loss.
- Intelligent variable-speed fan to effificiently dissipate heat and
extend system lifespan.
- It comes with double lithium battery activation modes: mains and
PV, and supports lithium battery access.
- All-round protection for solar panels includes overload and short
circuit protection,under-voltage and over-voltage protection, and
reverse polarity protection.
- With sun protection, heat insulation, roof ventilation.
- With waterproof and the fifiltration dust inlet.
- The cabinet body is designed for the IP55 protection level.
- The cabinet front door shutters with waterproof design, on the back
of welding outdoor cabinet.
- Modular design is easy to maintain.
- System confifiguration AC and DC lightning protection.
Remark:
- Long-term storage of the battery needs to be placed in a dry,
clean, dark, and well-vertilated indoor ervironment. The suitable
storage temperature range is-20-35°C.
- Batteries must be stored and transported in a state close to
50%SOC.
- For long-term storage, the electricity needs to becycled every 6
months.
- When loading and unloading the battery during transportation,
please be careful not to drop it, do not stack it over 4 layers,or
place it upside down, and ensure that the front is facing up.
IP55 Outdoor Cabinet Characterization:
■ The whole system integration includes an off-grid solar inverter
module, lithium iron phosphate battery pack, PDU, and
outdoor cabinet .
■ The system is commonly used in the corner of the city, remote
roads, mountains, bad environments, dust, moisture, rain,
mist-erosion, very poor power quality in the area .
■ The system provides a continuous pure sine wave AC power supply
for outside communications/network equipment .
IP55 Outdoor Cabinet Environmental Adaptability:
■ Wide input voltage, avoids frequent switching to battery power
because of large power grid voltage, reduce battery failure
probability, adapt to the power environment in poor areas .
■ The environment which require higher IP level, we use heat
exchanger to effectively reduce the temperature of box inside and
improve IP protection level .
IP55 Outdoor Cabinet Technical Parameter:
Model | CNW4850L-3KW | CNW4850L-3KWL | CNW4850L-5KW |
Inverter |
Output voltage waveform | Pure sine wave |
Rated output power(W) | 3000 | 3000 | 5000 |
Rated output voltage(Vac) | 230 | 120 | 230 |
Power factor | 1 |
Output frequency range | 50Hz±0.3Hz/60Hz±0.3Hz |
Bypass circuit breaker | 63A |
Rated battery input voltage | 48V(minimum starting voltage 44V) |
Battery voltage range | 48VDC |
Operating temperature range | -15℃to 55℃ |
Storage temperature range | -25°℃~60°℃ |
Communication interface | USB/RS485(WiFi/GPRS)/Dry Node Control |
Dimensions (L*W*D) | 482*425*133mm |
Weight (kg) | 13.3 |
AC Charge |
Battery type | Lithium Battery |
Maximum charge current | 0-60A | 0-40A | 0-60A |
Charge voltage range | 40-58Vdc | 40-60Vdc | 40-58Vdc |
Overcharge protection | Alarm and turn off charging in 1 minute. |
DC Charge |
Maximum PV open circuitvoltage | 145Vdc |
PV operating voltage range | 60-145Vdc |
MPPT voltage range | 60-115Vdc |
Battery voltage range | 40-60Vdc |
Maximum output power | 4200WV |
PV charge currentrange (settable) | 0-80A |
Lithium Battery Pack |
Rated Capacity | 50Ah | Nominal Voltage | 48VDC/51.2VDC |
Cell Resistance 1Khz | ≤0.8mQ | Charge Voltage | 3.65V |
Working environmenttemperature | Charge:0℃~55℃Discharge:-10℃~55℃ | Elevation | Less than 2000m |
Cycle life | 2500cycles≥80%,25±2℃,1C/1C,80% DOD |
Company Profile
Shenzhen CONSNANT Technology Co., Ltd. (simple name: CONSNANT) is a
professional manufacturer engaged in research, development and
production of UPS (Uninterruptible Power Supply) including the
Modular UPS, Outdoor & Indoor UPS,Industrial special UPS, Low
Frequency & High Frequency Online UPS and Solar Power System both
for home appliance and telecom equipments.
Our product has obtained the CE, ISO 9001, ISO 14001 and local
Chinese TLC certificates. Having reached good sales results in
China, we are now expanding our sales overseas.
We are proud of the fact that most of our company’s engineering
staff is well-qualified and has gained experience in relevant
fields more than 10 years. In order to protect your equipment from
electrical supply network instability, we offer innovative
solutions that obtain higher availability systems, improve
efficiency and offer flexible solutions to meet specific needs and
range of application. The UPS product is widely used in data and
computing centers, finance institutions, banks, within industry and
medical fields.
We welcome any kind of collaboration, will enjoy any opportunities
of dealing with new costumers: from distributors to ultimate
consumers, undertake both wholesale and retail orders, including
the sale of finished goods or parts.
If you start work with us, you will not only get high-quality
product at reasonable price, but also maintain the profitable
conditions for further years.
We are located in the world-famous High-Tech center – Shenzhen
city, China. Our factory is close to airport. If you are lucky to
visit the city, you are kindly welcomed to visit our factory.





