2000 GMP Double Suction Diesel Engine Fire Pump Set With UL / FM Certificates Be accordance with NFPA 20

Brand Name:CNP NM FIRE
Certification:UL
Model Number:SCF200-150-330
Minimum Order Quantity:1set
Delivery Time:60 Days
Payment Terms:L/C, T/T
Contact Now

Add to Cart

Verified Supplier
Location: Wuhan Hubei China
Address: Rm. E, 16th FL., Century Bldg. No. 206, Jianghan Rd., Hankou, Wuhan, China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

2000 GMP Double Suction Diesel Engine Fire Pump Set With UL / FM Certificates Be accordance with NFPA 20


Main Parameters:


PumpNM Fire Split Case
Type:SCF200-150-330
Rated Flow:2000 usgpm
Rated Head:90m
Speed:2980rpm
Engine:NM Fire
Type:NM6-110D 121HP
Fuel tankNM Fire 1000L single wall
Controller:Tornatech
Type:GPD-24-220/240
Jockey pumpCNP CDL12-9
MotorTechtop F-TDC444TS200U2B
ControllerTornatech GPY-380V/200HP/3PH/50HZ


Horizontal Split Case (HSC) pumps are given their name due to the “split”” design of the casing, where the casing cover can be lifted off of the pump to expose the internal components.


These components include the impeller, bearings, pump shaft, and so on. HSC pumps have two bearings, located on either side of the impeller, which are useful to withstand the large amount of vibration and thrust forces often caused by water turbulence in the suction piping.


The pump casings are often designed to handle higher working pressures, and are often heavier. The durability of the HSC design allows the pump to be used for very large water flows – often in excess of 5000 GPM.


It should be noted that an HSC pump is not always mounted horizontally, it is possible to have the same durability design features and have the pump designed to be mounted vertically.


Advantages


First-Class international technical standards.


  • CNP NM FIRE is the first member of NFPA from China pump's manufacturers.and won the UL,FM international fire certification for fire pump products.

First-Class testing and inspection equipment.


  • UL certification represents the world's highest technical standards of fire certification,but also means that certified fire products must withstand the most extreme,harsh test process,the purpose of certification designed to verify whether the product meets the performance,safety and quality requirements,so as to achieve the purpose of property protection.
  • NM fire obtained fire diesel engine UL1247 and fire pump UL448 witnessed laboratory accreditation,fully proved that the company in terms of hardware and software strength,are to meet the strict requirements of UL certification.
Before quotation,we need some basic information for selection & supply Scope :
1:Parameters including head ,flow, altitude, temperature, voltage, frequency
(A deduction of 3 % from engine horsepower rating at standard SAE conditions shall be made for diesel engines for each 1000ft(305m) altitude above ft.(91.4m) engine horsepower rating as corrected to standard SAE conditions
shall be made for diesel engines for every 10°F(5.6℃)above 77°F(25 ℃)ambient temperature.)
2. Scope of supply
3. Special requirements (Brand requirement/ technical requirements on product function…)
4.Listed or Non-listed products ?
China 2000 GMP Double Suction Diesel Engine Fire Pump Set With UL /  FM Certificates Be accordance with NFPA 20 supplier

2000 GMP Double Suction Diesel Engine Fire Pump Set With UL / FM Certificates Be accordance with NFPA 20

Inquiry Cart 0